FPGA VAX update

[Tony Duell]

> You could even short-cut some of the FPGA work.  I don't recall what 
> the microsequencer looks like on the 11/730, but if it's the usual 
> Am29{09,10,11}, there is at least one shop that still (as of at least 

>From what I rmembnr, the sequencer is PALs + a bit of TTL. There are none 
of the AMD sequencer chips in there.

Incidentally, the PALs in the 11/730 are 'protected by solder'. That is, 
the security fuses are intact. If you are prepared to desolder them from 
the PCBs, you can read them out. 

-tony