Looking for RL02 cable and terminator

[Tony Duell]

> 
> RL01 and RL02 cables have those funny connectors at both ends.  It
> sounds like you haven't got the ribbon cable for the interface end
> either; that would be a short 40-way ribbon with a Berg connector on
> each end with one of the opposite-gender funny RL0x connectors plugged
> into one of the Bergs.
> 
> I've never seen those connectors elsewhere, but on the inside of the
> drive, they're 40-pin headers like a Berg connector, so you could, as a
> last resort, use something else to get you going.

The connector on the back of the drive is one of the adapters between the 
odd RL-style connector (on the outside) and the 40 pin Berg on the 
inside. It is exactly the same part as the connector you put between the 
other and of the RL-type cable and the 40 way ribbon cable back to the 
controller.

I remember raiding those connectors off scrapped RL power supplies to 
connect up the RLs (and for that matter RK07s) in one of my systems.

-tony