PalmOS no more? :(

[Chuck Guzis]

On 10/2/2005 at 5:57 PM ard at p850ug1.demon.co.uk wrote:

>If you remove either bezel you want to make sure you don't lose the 
>spring. It might be easier (assuming you're happy working on devices 
>containing CMOS chips) to remove the bottom cover first (there are 4 
>screws under the feet), take out the 2 springs (they fit in holes in the 
>top case moulding) then remvoe and re-stick the bezel. 
>
>I'd use contact adhesive to stick it on, I think. The stuff you apply to 
>each surface, let it dry, then press together. Keep it off the display 
>itself!
>
>And of course make sure you don't crease the bezel when taking it off. 
>You will not remove such creases.

Thanks, Tony, that's some very useful information.  I was intending to use 3M Scotch 77 spray contact adhesive.  

Do you have any advice on the least-damaging way to free the bezel from its currently stuck-on state?  I want to avoid creases, so some way to soften the existing adhesive would be very nice indeed.

Cheers,
Chuck