Discharging a VT100 CRT

[Julian Wolfe]

Mine is what's described as a "Digital" board.  It looks very similar to the
Ball Brothers unit.  The flyback used is the same as the Elston one though.

Weird stuff.

-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]
On Behalf Of Bill Pechter
Sent: Wednesday, November 09, 2005 7:18 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Discharging a VT100 CRT

If I remember correctly there's a later varient which worked with the 
different ones.

IIRC most were Ball Brothers.

Bill

Allison wrote:

>>Subject: RE: Discharging a VT100 CRT
>>  From: "Julian Wolfe" <fireflyst at earthlink.net>
>>  Date: Wed, 09 Nov 2005 13:17:26 -0600
>>    To: "'General Discussion: On-Topic and Off-Topic Posts'"
<cctalk at classiccmp.org>
>>
>>How much are you asking for the monitor board?
>>
>>-----Original Message-----
>>From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]
>>On Behalf Of Useddec at aol.com
>>Sent: Wednesday, November 09, 2005 1:14 PM
>>To: cctalk at classiccmp.org
>>Subject: Re: Discharging a VT100 CRT
>>
>>Hi,
>>
>>I have the logic board, power supply, and what we used to call the
"monitor 
>>board" in stock. I worked on a lot of these when I worked for Digital.  I
>>now 
>>deal in DEC parts.
>>
>>Thanks, Paul
>>
>>    
>>
>Make sure it's the correct one.  There are three versions for the differing

>monitors.  The monitor portion were made for DEC to spec and could be 
>Ball brothers, Moto or I forgot. 
>
>Allison
>
>  
>