Mini Jumpers for 68 pin SCSI drives

[Sridhar Ayengar]

James Rice wrote:
> Teo Zenios wrote:
> 
>> Anybody know of a cheap source for mini jumpers for SCSI HD's? I 
>> looked in
>> my parts box and I have quite a few of the normal sized jumpers but 
>> none of
>> the minis and need a dozen or two for a SCSI tower I am working on.
>>
>> The drives I am using are all factory set to ID 6 (IBM drives) and don't
>> have any jumpers at all on ID select pins. I assume that once you 
>> jumper the
>> apropriate pins it will overide the factory settings? The SCSI tower 
>> has the
>> normal sized ID select cabled and they are too large to fit the drives 
>> so I
>> need to do it via jumpers.
>>
>>
>>
>>
>>
>>  
>>
> Fry's usually carries them.  They run around $4 a bag of 20 or so.

The store John Boffemmyer used to work for had 10 for 70 cents.

Peace...  Sridhar