Torch Computers Ltd PSU available - anyone need a spare?

[Tony Duell]

> 
> On Sun, 2005-06-26 at 19:14 +0100, listmailgoeshere at gmail.com wrote:
> > I have here a Farnell N110P411 open-chassis SMPSU. On a relay on one
> > end of the board there is a white sticker with the text "TORCH
> > COMPUTERS LTD (C) 1983" and a QC stamp.
> 
> I expect that's the one used in the Torch Triple-X - it's about 125W I
> think...

I am pretty sure the Quad-X used the same PSU, but I am not pulling the 
not-quite-complte one out from under my bed to check.

If it is this supply, it's a fairly standard SMPSU giving the normal 
outputs, with a soft power switch. THere are 2 contacts at the front of 
the PSU chassis (connected to a 0.1" 'Minicon' on the PCB) that go to the 
touch switch contacts themselves. TOuching those turns on the relay 
(powered by the NiCd on the board), it's held on by a signal from the 
mainboard, which can then also turn the supply (and thus the machine) off.

I have a hand-drawn schematic of the XXX supply (and the rest of the 
machine for that matter).

-tony