Ŀ
                                                                   
 AT&T PC6300 SUPPORT BBS - Bulletin Service                        
                                                                   
 SUBJECT: Using the Central Point CopyIIpc Board in a PC6300       
 PROVIDED BY: AT&T PC-Hotline                                      
                                                                   

  The problem with the CopyIIpc Board has nothing to do with DMA or
  the DMA fix.  Central Point Software was given incorrect
  information from Olivetti, and set the board to access the DMA
  port dedicated to the Floppy drive.
  If a CopyIIpc Board owner has a new board, made after March 1986,
  there will be two jumpers in the lower right portion of the board
  marked DMA.  The fix is to move these jumpers to the LOWER
  position, then invoke with TC /C1 from the keyboard or batch file.
  If a user has an older board without these jumper positions,
  Central Point will replace it, at no charge, by calling the number
  for Central Point in the CopyIIpc Board manual.
 
 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                