-
-
-
0                                ======================
                                  I N T E R C H A N G E
                                 ======================
-
0                    THE CONCURRENT COMPUTER CORPORATION USERS GROUP
-
-
-
-
-
0                                     =============
                                      P R O G R A M
                                      L I B R A R Y
                                      C A T A L O G
                                         R21-03
                                      =============
-
-                                       February
                                          1992
1
0                                   TABLE OF CONTENTS
-
-        1.0  INTERCHANGE-THE CONCURRENT COMPUTER CORPORATION USERS GROUP...1-1
              1.1    OBJECTIVES.............................................1-1
              1.2    MEMBERSHIP.............................................1-1
              1.2.1  Membership Qualifications..............................1-1
              1.3    PROGRAM LIBRARY OPERATION..............................1-2
-        2.0  INTERCHANGE PROGRAM LIBRARY ABSTRACTS.........................2-1
-                                      APPENDICES
0        Appendix 1    INTERCHANGE Library Program Order Form...............A-1
         Appendix 2    INTERCHANGE Library Submission Form..................A-2
         Appendix 3    INTERCHANGE Membership Application Form..............A-3
1
0                                       CHAPTER 1
              INTERCHANGE - THE CONCURRENT COMPUTER CORPORATION USERS GROUP
-        1.1 OBJECTIVES
0        The objectives of INTERCHANGE,  the  Concurrent  Computer  Corporation
         Users Group, a voluntary non-profit group are as follows:
0             Establish  and  maintain  a vehicle to effectively facilitate the
              exchange of information among the membership.
0             Provide guidance and support  for  Special  Interest  Groups  and
              Local INTERCHANGE Chapters.
0             Provide the membership the means to collectively communicate with
              Concurrent  Computer  Corporation  on  current and future product
              development and support.
0        Continued  activities  which  are  designed  to  help  achieve   these
         objectives are:
0             National Newsletter
0             National User Program Library
0             Annual National Convention
0             Special Interest Group Meetings
0             Local Chapter Meetings and Local Interest Groups
0             Quarterly meetings between the  INTERCHANGE  Executive  Committee
              and Concurrent Computer Corporation representatives.
-        1.2 MEMBERSHIP
0        Membership in INTERCHANGE is voluntary.  Members are invited  to  take
         an  active  interest  in  INTERCHANGE  by  contributing to the program
         library, the newsletter, and by participating  in  it's  meetings  and
         seminars.
0        All  members  will receive the newsletter and program library catalog.
         Other INTERCHANGE material is available on a request basis.
0        1.2.1 Membership Qualifications
0        An INTERCHANGE membership  may  be  obtained  by  any  company,  firm,
         organization or individual meeting one of the following criteria:
0             Currently owns a Concurrent Computer Corporation computer.
0             Has  placed  an  order  for  a  Concurrent  Computer  Corporation
              computer.
0             Is an OEM using or incorporating Concurrent Computer  Corporation
              hardware or software into their products for resale.
-
                               INTERCHANGE PROGRAM LIBRARY                  1-1
1
0             Provides hardware or software consulting  services  to  users  of
              Concurrent Computer Corporation computers.
0             Is a  supplier  of  Concurrent  Computer  Corporation  compatible
              hardware or software.
0        Membership requires the yearly payment of dues.
0        Membership  application  forms  may  be   obtained   by   writing   to
         INTERCHANGE,  1  Technology Way, Westford MA 01886-9918.  508-392-2651
         FAX-508-392-2368.
-        1.3 PROGRAM LIBRARY OPERATION
0        The INTERCHANGE  Program  Library  contains  programs  contributed  by
         users.
0        Users  are  urged to submit programs which will be of value to others.
         When submitting FORTRAN programs please  also  submit  versions  which
         will  compile  using  only  the  development compiler if you have such
         versions available.  When submitting programs in CAL  Macro/32  please
         do  not  forget to provide any user written macros which may reside in
         site specific macro libraries.  Any 'included' files called in  during
         compilation,  expansion or assembly in any relevant language should be
         provided.  When other than Concurrent  Computer  Corporation  standard
         libraries are used they should be provided in source and library form.
         In  general,  program submittals should include full source and, where
         applicable, link command files and task image.  Embedded link commands
         using the DCMD command is a recommended alternative  to  link  command
         files.   Where  the  option  is  available  to you please provide task
         images which will run on both the 32 and 3200 series machines.  Please
         remove any specific volume name dependencies from CSS's.  Lets make it
         easy for our members to use your program submittals.
0        Requests for programs must be  submitted  to  INTERCHANGE  in  writing
         using the request form in appendix 2 along with the appropriate fee.
-
-
-
-
-
-
-
-
         1-2                   INTERCHANGE PROGRAM LIBRARY
1
0                                       CHAPTER 2
                          INTERCHANGE PROGRAM LIBRARY ABSTRACTS
0        IUG0101: MEMFILE
         Category: UTIL        Language: CAL Macro/32             R-00 09/15/83
         MEMFILE is an E-Task which makes use of SVC intercepts to create a
         virtual device called MEM:.  A user task may assign this 'device' and
         through it read all of configured memory in either random or
         sequential mode in 256 byte blocks, just as if memory were a read only
         contiguous file.  This program is particularly valuable in conjunction
         with DMPTYP IUG0491 and DUMPRINT.
0        IUG0102: OS/32 ENHANCEMENTS
         Category: OS&L        Language: CAL Macro/32             R-10 02/12/92
         This catalog entry has been opened to receive enhancements to the
         operating system.  Such enhancements can be those of general
         usefulness or for a specific application, such as specialized drivers.
         Currently this package contains enhancements to the BIOC driver.  The
         OS 6.2.4/7.2/8.1 BIOC enhancements include minimum write timeout
         specification, control over type ahead buffer length, suppression of
         rubout echo, a correction to DCB40, ability to send a line break,
         sysgen clock specification which functions on dial-in lines, reset of
         CMD2 byte to sysgen value upon disconnect, and several enhancements
         required for smooth operation with the new intelligent modems.
0        An enhancement to BIOC is provided which gives the user an 8 line
         history buffer.  The user may retrieve any of the last 8 typed lines,
         view it, then optionally execute it.  Currently BIOC only allows you
         to retrieve the single last line entered.
0        The panic dump module is enhanced with respect to generic discs.
0        BACKUP is changed to make CLOSE=REWIND the default.
0        CAL is enhanced by the addition of new pseudo-ops and start string
         parms:  PASS/NPASS causes CAL to output to the user's terminal the
         message 'Ending pass nn' at the end of every pass.  NLSTP[ char]/LSTP
         causes CAL to suppress from the symbol table listing those symbols
         which begin with the prefix 'char' whose default value is '@'.
         LOUR/NLOUR causes CAL to list only unreferenced symbols.  Two new
         pseudo-ops, ALERT & ERROR, allow the user to force warnings (ALERT)
         and errors (ERROR) permitting one to delay until assembly time certain
         checks whose evaluation is not possible at macro time.
0        BIAS, EXAMINE and MODIFY from the OS console are greatly enhanced.
         The EXAMINE display is enhanced to display both the absolute address
         and the offset with respect to the bias.  BIAS now has this new
         compatible format:
         BIAS N|+N|-N|*[TaskName][+N|-N]|null.  If N bias is set to that
         absolute value, If + or - N bias is offset from the current value by
         that amount.  If *[+N|-N] the bias is set to the start of the
         currently 'tasked' task plus or minus the offset N.  If the TaskName
         is included it is automatically 'tasked' then the bias is set
         accordingly.  EXAMINE has this new compatible format:
         EXAMINE AddressExpr[,N|/AddressExpr][,fd].  An AddressExpr is
         N|+N|-N|^[+N|-N]|![+N|-N|].  N and +N indicate the display is to start
         N bytes forward from the bias while -N begins the display N bytes
         before the current bias.  "^" is a variable whose value, initially 0
         and always reset by the BIAS command, is the starting address with
-                              INTERCHANGE PROGRAM LIBRARY                  2-1
1
0        respect to the bias of the last effective EXA command while "!"  is a
         variable whose value, initially 0 and always reset by the BIAS
         command, is the address of the byte one greater than that displayed by
         the last effective EXA command.  MODIFY also sets "!"  in this manner,
         but does not set "^".  MODIFY has this new compatable format:
         MODIFY AddressExpr[,HalfwordData|null]*.  "*" means one or more
         repetitions.  When a null parm is encountered the corresponding
         halfword in memory is not altered.  As a result of MODIFY setting "!"
         but not "^" the following very convenient commands are possible:
         EXA 1FEA,2;MOD ^,C830,8000;MOD !,4230,8076 followed by simply
         EXA ^/!  to view the results.  An additional form of the MODIFY
         command allows registers in the 'tasked' task to be modified:
         MODIFY Rn[,FullwordData|null]*.  Rn is the starting register where n
         is in [0,F].  A null parm skips the corresponding register.
0        The changes and enhancements offered in this package are provided only
         in source updater format, you must apply them youself against the
         appropriate source modules.
0        A series of new console commands are implemented:  XCANCEL - same as
         cancel except no error is generated if task isn't present;
         $IFTASK/$IFNTASK execute/skip commands if named task is loaded;
         $IFWCS/$IFNWCS - execute/skip commands if processor supports WCS;
         $IFOS/$IFNOS N.M - execute/skip commands if OS version is N.M.  $QUERY
         - Use like a $WRITE.  The text string is written to the console with
         an appended question mark to which a "yes" or "no" response is
         required setting the EOT code to zero or nonzero.
0        IUG0103: CODECARD
         Category: UTIL        Language: CAL Macro/32             R-01 07/22/85
         A program to generate a formatted ASCII code card and send it to a
         device.  Useful for testing the controller/device response to the
         ASCII set.
0        IUG0104: OBJECT LIBRARY UTILITIES
         Category: UTIL        Language: CSS                      R-00 01/31/84
         A package of 4 CSS files which greatly facilitate the creation and
         maintenance of object libraries.  These CSS's use the standard LIBLDR
         to allow you to create, add modules to, replace modules in, and to
         list the contents of such libraries with a single command.
0        IUG0105: XAIDS - OS DEBUGGING TOOL
         Category: OS&L        Language: CAL Macro/32             R-04 02/12/92
         Contributed by CCUR as a useful, but unsupported, program, XAIDS is
         intended only for the experienced systems programmer for use in
         operating systems work.  XAIDS is substituted for UBOT when generating
         an OS.  When so installed XAIDS takes control of the illegal
         instruction trap and may be used to insert breakpoints, disassemble,
         display register sets, etc.  Users with their own specialized drivers
         should find this a valuable diagnostic tool.
0        IUG0106: MACTOOLS - MACRO TOOL KIT
         Category: OS&L        Language: CAL Macro/32             R-09 08/11/89
         Macros - with more to come - currently containing time/date processing
         macros to pack/unpack date from halfword, date and time from fullword.
         These are an implementation of algorithm 199 from the Collected
         Algorithms of the A.C.M.  The year 2000 looms large.  If you store
         time and date using these macros you won't be in any trouble until
         Thursday April 8, 2100 at 06:25:15.  Macros to control segmentation
-        2-2                   INTERCHANGE PROGRAM LIBRARY
1
0        options.  Macro to generate a uniformly distributed random integer.
         Macros to do left and right justification of strings in a buffer.  A
         macro to find the first match of a pattern in a string, with the
         option to ignore upper/lower case distinctions in [a..z,A..Z].
         OSREV..generates a user stated symbol which is equated to the OS
         revision level.  OSUPDATE..analagous to OSREV for OS update level.  A
         macro to parse a start sting.  Macros to translate ASCII to EBCDIC and
         EBCDIC to ASCII.  RAISE and its counterpart LOWER converts a buffer
         from lowercase to uppercase and visa versa optionally padding with
         spaces and clipping to 7 bit.  CLIP7 clips to 7 bit and optionally
         pads with spaces.
0        IUG0107: DEVICE HARDWARE STATUS LOOP PROGRAM
         Category: UTIL        Language: CAL Macro/32             R-00 04/06/84
         Program will report changes in status in the DCB and the status in the
         SSR command.  Will also print a message if the device name is found in
         a table in the program.
0        IUG0108: MAP - DISPLAY MEMORY FROM MTM TERMINAL
         Category: UTIL        Language: CAL Macro/32             R-04 02/12/92
         Allows the privileged MTM user to display the system memory map to his
         terminal providing much the same information as a D M command from the
         OS console.
0        IUG0109: GLOBALLY ACT ON A SPECIFIED FILE DESCRIPTOR PATTERN
         Category: UTIL        Language: CAL Macro/32, FORTRAN    R-01 08/01/86
         Allows a user at an MTM terminal (or the system console) to construct
         and execute a CSS command (GB) that applies to all files that match
         the specified file pattern.  For example, GB X-.-,DE &F.&E would
         delete all files that begin with an X.
         GB -.FTN,$IFNX &F.OBJ\COMPILE &F\$ENDC would compile all .FTN files
         that did not have a corresponding .OBJ file.  In the above, &F
         substitutes for the filename, &E for the extension, other fields found
         in the D F listing are similarly represented.  The "\" acts as a line
         separator, allowing multiple commands on a single line.
         GB :-.-,$IF CH &V:&F.&E NE &V:GB.EXE\DEL &V:&F.&E\$ENDC would delete
         all files in the users account on all accessible volumes.  The
         $IF CH...is needed to avoid trying to delete GB.EXE which contains the
         constructed commands.  For this command to work of course all the
         users files to be deleted must be unprotected and unassigned.
0        IUG0110: SRCCOM - SMART TEXT FILE COMPARATOR
         Category: UTIL        Language: Pascal                   R-03 08/07/86
         Defines match by user selectable number of contiguous equal records.
         Can optionally ignore blanks, sequence numbers and FORTRAN style
         comment lines.  Upon detecting a mismatch it seeks ahead in each file
         for a resumption of match.  Maximum lookahead is limited only by
         available memory.
0        IUG0111: FORTRAN/FILE UTILITY PACKAGE
         Category: UTIL        Language: FORTRAN                  R-01 01/28/90
         COLM..Shifts part or whole lines within a file.  COMPARE..Provides
         line by line comparison of two files.  COMTABLE..Sorts and tabulates
         FORTRAN source file block or blank common blocks.  Common is copied
         throughout all desired subroutines.  COMTABL2..Sorts and tabulates all
         existing FORTRAN source file blocks or blank common blocks.
         DOLOOP..Indents and/or realigns FORTRAN source files.  GENINPUT..Used
         to easily manipulate data files.  LABEL..Adds or removes statement
         labels to all executable statements in a FORTRAN program.
-                              INTERCHANGE PROGRAM LIBRARY                  2-3
1
0        LISTF..Provides quick listings to console of files.  NUMPR..Prints a
         sequentially numbered copy of a file.  PHOTO..Sets up a log file
         monitoring console activity.  RENUMBER..Renumbers statement labels in
         a FORTRAN program.
0        IUG0112: NEW SOURCE UPDATER
         Category: UTIL        Language: FORTRAN                  R-00 06/06/84
         An alternative to the CCUR source updater.  Its a tad more friendly to
         use.  Revision numbers in the sequence field do not confuse it.
0        IUG0113: "FAIRLY WONDERFUL UTILITIES"
         Category: UTIL        Language: FORTRAN                  R-00 06/06/84
         A collection of utilities, each of which alone may not appear to be
         much, but together they are "fairly wonderful" according to the
         author.  MOVELEFT shifts a record a specified number of columns.  CLIP
         clips records before or after a specified pattern.  PARAM adds
         Integer*4 declarations for all untyped parameters in a FORTRAN
         program.  TOUPPER changes lower to upper case while TOLOWER does the
         opposite.  EXCEPT finds all lines in a file not containing a specified
         pattern.  FIND is the inverse of EXCEPT.  DIR presents a sorted
         directory listing qualified by a selection pattern.  STRIP removes
         comment lines in FORTRAN programs.  APPEND appends one file to
         another.  APPLY inserts a string in a file.  UNIQUE removes duplicate
         lines.  WRITETO appends a string to a file.  MORE presents a file on
         the screen 23 lines at a time.  PRINTQUE is yet another printer queue
         display program.  CURSOR is a library of cursor control routines.
         BSORT and QSORT are bubble and quick sort routines.  STRING is a
         library of string functions.
0        IUG0114: ALPHA3 - FORMATS BACKUP LISTING IN 3 COLUMNS
         Category: UTIL        Language: PASCAL & MACRO ASSEMBLER R-00 04/10/86
         Processes the list output of BACKUP into a 3 column format sorted by
         filename within account number.
0        IUG0115: NATIONAL BUREAU OF STANDARDS CORE MATHEMATICAL LIBRARY
         Category: MATH        Language: FORTRAN                  R-01 10/02/85
         A collection of non-proprietary FORTRAN subprogram packages solving a
         variety of mathematical and statistical problems.  Although most
         applications will only use a small number of CMLIB modules, there are
         no name conflicts within the library and thus all of CMLIB can easily
         be installed.  All the documentation is machine readable.
0        IUG0116: SAN DIEGO ENVIRONMENT CONTROL MANAGER
         Category: UTIL        Language: CAL Macro/32             R-25 02/12/92
         The Environment Control Manager (SDECM/32) provides facilities for
         terminal users to transfer control of their terminals between local
         monitor tasks as well as to access remote processor systems via
         PENnet.  Access is also provided to locally written monitor tasks.
         Monitor tasks include Reliance and MTM.  Transfer of control is
         subject to the task being able to accept and interpret the 'ADD
         terminal' command sent by SDECM/32.  SDECM will control up to 126
         terminal pairs (BIOC/ITAM) to provide easy transition between MTM and
         Reliance.  A functional variation supporting nonpaired lines will
         support up to 253 terminals.  A 'screen saver' feature clears the
         screen of local terminals after 10 minutes of no use.  A 'modem
         disconnect' feature disconnects a phone line after 1 minute of no use.
         These times are configurable.  A 'I/O Count' feature tabulates the
         number of I/O's on each terminal and sends an alert to the OS console
         when a configurable threshold is exceeded.  Disconnected terminal
-        2-4                   INTERCHANGE PROGRAM LIBRARY
1
0        lines can ring and swamp the system with interupts consuming large
         amounts of processor time.  This warning will alert you to the source
         of the problem.
0        IUG0117: KERMIT FILE TRANSFER PROTOCOL IMPLEMENTATION
         Category: UTIL        Language: FORTRAN                  R-05 02/23/90
         KERMIT is a protocol for transferring sequential files between
         computers of all sizes over ordinary asynchronous telecommunications
         lines using packets, checksums and retransmission to promote data
         integrity.  The protocol was developed at Columbia University.  This
         is KERMIT-CO V2.2 12/20/89.
0        IUG0118: HANDY CSS'S
         Category: UTIL        Language: CSS                      R-03 08/01/86
         Devoted to generally useful CSS's, currently including:  HC..Hex
         calculator.  DC..Decimal calculator.  HD..Hex to decimal conversion.
         DH..Decimal to Hex conversion.  ACCT..Displays private & group account
         numbers, Date & Time, Device Name, Batch File Descriptor, User ID &
         Last EOT code.  BATCH..Submit a CSS as a batch job.  A package of
         systems development CSS's to do macro expansions, assemblies,
         compiles, links in foreground and background are provided.
0        IUG0119: IRDR - SUBMIT CONSOLE COMMANDS FROM MTM TERMINAL
         Category: UTIL        Language: CAL/Macro32              R-01 08/04/87
         This task creates a pseudo device to which a user task can assign and
         write.  The user's data buffer is passed to the OS command processor
         via a SVC 2,14 to be executed as a command line.  WARNING-Very useful
         in restricted circumstances--Too dangerous to have available in the
         typical multiuser environement as the average MTM user can do untoward
         things to the system!
0        IUG0120: CAPTURE DEVICES
         Category: UTIL        Language: CAL/Macro32              R-00 11/19/84
         Two programs, DEVASG which intercepts and performs all assigns, which
         has been instructed by ASGDEV to accept all requests or only those
         from a specified user.  A user can, without being assigned to a given
         device, deny other users access, until released by ASGDEV.  A user
         could for example prevent other users from corrupting his tape before
         he could get it removed from the tape drive, or he could reserve the
         plotter for himself.
0        IUG0121: ENABLE/DISABLE TYPAHEAD
         Category: UTIL        Language: CAL/Macro32              R-00 11/19/84
         Disables/Enables typeahead on BIOC devices which are not assigned to
         MTM or any other program.
0        IUG0122: TEXT/32 FORMAT TO VFC
         Category: UTIL        Language: FORTRAN                  R-04 01/21/87
         Translates formatted output of TEXT/32 into VFC output.  A VFC file
         can be saved and printed later, and is considerably more compact than
         a formatted file.
0        IUG0123: ARCHIVING SYSTEM
         Category: UTIL        Language: FORTRAN                  R-00 01/31/85
         A system to aid in the archiving of user files.  It is of particular
         use to sites which have a large number of independent users.  Users
         can request a file be archived by a single command.  The option to
         delete the file from disc after archiving is available.  The user is
         informed at the time of the request of the tape number to which the
-                              INTERCHANGE PROGRAM LIBRARY                  2-5
1
0        file will be archived.  The actual archiving is performed at a later
         date, according to a schedule established at the installation.  The
         operator can archive files on all volumes with a single command.
         Audit logs are produced of all file archive requests and of all files
         actually archived.
0        IUG0126: NBS LIBRARIAN
         Category: UTIL        Language: FORTRAN                  R-00 02/08/85
         The NBS Librarian is a program for cross referencing object modules in
         files.  This cross referencing is by external reference/entry point
         pairs.  The Librarian scans files containing object modules and
         produces a cross reference map and assigns a static link level to each
         object module.  Given a set of unique entry points defined in some
         number of modules with no recursion, there exists a static link map
         which is a directed tree.  The static link level is the level in which
         a module would be placed such that it is one lower than the lowest
         module calling it.
0        IUG0127: SHOW TIME & PECALC
         Category: UTIL        Language: FORTRAN                  R-00 03/08/85
         SHOW TIME continuously displays the time in full screen size letters.
         Currently designed for Freedom 100 terminals, should be readily
         adaptable for any terminal which allows cursor addressing.  PECALC is
         a terminal calculator operating in both decimal and hex.  In addition
         to conversions and simple arithmetic it also performs exponentiation,
         logs, squares and trig functions.
0        IUG0128: COMPRESS - HIGH PERFORMANCE DATA COMPRESSION UTILITY
         Category: UTIL        Language: C                        R-01 04/27/85
         This is the now-famous state-of-the-art public domain data compression
         program "compress" which has been ported to OS/32 by its author.  This
         program uses a new technique called "modified Lempel-Ziv" to compress
         files down to sizes that were never thought possible in a
         data-independent algorithm.  This program will help you alleviate the
         ever-pressing problem of disk space.  All previously developed text
         compression programs are made obsolete by this program.  In addition,
         binary files are handled correctly.  A program is included to perform
         operations on multiple files based on a Display Files pattern.
0        IUG0129: DUPE - EASY TO USE TAPE DUPLICATOR
         Category: UTIL        Language: CAL                      R-00 04/15/85
         A program which takes one tape as an input master and generates up to
         4 copies of it simultaneously.  The input tape is considered ended
         when a double end of file marks is read.  The double end of file mark
         is written to the copies as well.
0        IUG0130: READCHEK - QUICK DISC SURFACE CHECK
         Category: UTIL        Language: CAL MACRO/32             R-03 05/23/90
         Assigns SRO to the disc and reads the entire surface, reporting any
         errors.  If given enough space it will read entire cylinders.
         Provides an informative report including tracks/cylinder,
         sectors/track, total cylinders, total sectors, total megabytes,
         transfer rate in megabytes/second, device code, device address,
         controller address, selch address and device name.  Executes very
         quickly!
0        IUG0131: MAGCTRL - SEND COMMANDS TO TAPE DRIVE
         Category: UTIL        Language: CAL MACRO/32             R-00 04/15/85
         Program to command a drive to back file, back record, forward file,
-        2-6                   INTERCHANGE PROGRAM LIBRARY
1
0        write filemark, rewind, rewind and unload and select density.  Very
         convenient.  When started without parms it explains its use.
0        IUG0132: DEVWAIT - COORDINATE DEVICE RESOURCES
         Category: UTIL        Language: CAL MACRO/32             R-00 04/15/85
         A program which as its start string accepts a list of device names.
         It attempts to assign each of these ERW.  Those which are successfully
         assigned remain assigned, those which cannot be assigned are tried
         again after 10 seconds.  This cycle repeats until all devices in the
         list are assigned, at which point the program goes to EOT=0.  Useful
         in coordinating a process requiring specific device resources.
0        IUG0133: CARNIFEX - MTM SYSTEMS MANAGER'S UTILITY
         Category: UTIL        Language: CAL MACRO/32             R-01 01/29/86
         A MTM Systems Manager's Utility which allows a privileged user by
         account number specification to:  allocate a file, rename (including
         account transfer), reprotect, delete, display files by account number,
         copy one file/device to another optionally deleting the source, list
         a file with line numbering, print a file.  A help screen explains its
         use.
0        IUG0134: WAIT - WAIT FOR OPERATOR RESPONSE OR TIMEOUT
         Category: UTIL        Language: CAL MACRO/32             R-06 06/12/86
         WAIT is designed to be inserted in a CSS stream as follows:  LO WAIT
         ST ,!Q[uiet],T[imeout]=seconds generating the message "Hit RETURN to
         continue>".  Entering the RETURN key causes WAIT to go to EOT code 0,
         any other entry results in EOT code 2.  Not responding results in a
         timeout and EOT code 1.  By testing the EOT code you may direct
         further execution of the CSS.  The !QUIET parm suppresses the sending
         of a bell, i.e.  control G, with the message.  The TIMEOUT period may
         be stated, but if not it defaults to 5 seconds.  If started with ST ,
         !H[elp] a description of the use of the program is displayed on the
         user's screen.  All possible error conditions are diagnosed.  The time
         remaining is displayed as it is counted down.  Besides being a useful
         program it is a thoroughly commented example of the use of task queue
         traps, proceed I/O and timer completion queue entry.
0        IUG0135: SYPMAP - MAP SYSTEM SPACE USAGE
         Category: UTIL        Language: CAL MACRO/32             R-02 10/17/85
         SYPMAP produces a map of system space, showing how each block of
         memory is used.  For each block the following data is given:  The
         owning task, the type of block, and starting and ending addresses of
         the block, the size of the block in hex and decimal, additional
         information if applicable, e.g.  file control blocks, file descriptor,
         program name.
0        IUG0136: CPUUSERS - PERIODICALLY DISPLAY CURRENTLY EXECUTING TASK
         Category: UTIL        Language: CAL MACRO/32             R-03 10/17/85
         Every 0.2 seconds (adjustable) display the currently executing task,
         load file, memory size, system space used, run priority and task
         status.
0        IUG0137: MAGLOCK-DYNAMICALLY RESERVE TAPE RESOURCES BY ACCOUNT NUMBER
         Category: UTIL        Language: CAL MACRO/32             R-00 06/27/85
         MAGLOCK prevents unauthorized use of a tape drive by requiring MOUNT
         and DISMOUNT commands accompanied by an account number at the OS
         console.  This prevents inadvertent repositioning, or worse yet,
         destruction of another users data during the time when the tape is on
         the drive but not assigned to a specific task.  A status command shows
-                              INTERCHANGE PROGRAM LIBRARY                  2-7
1
0        the assignability status of all drives.  MAGLOCK uses intercepts and
         communications features of the OS.
0        IUG0138: DELECAND - SUGGEST DISC FILE CANDIDATES FOR DELETION
         Category: UTIL        Language: CAL MACRO/32             R-01 03/27/86
         DELECAND suggests disc file candidates for deletion, producing a
         report showing sectors used per file, in decreasing order.  Files
         using the most space are shown on the first page.  If any files have
         not been assigned for a year, a second report will list these.
0        IUG0140: TINFO - DISPLAY TASK AND LU INFORMATION FOR ANY TASK
         Category: UTIL        Language: CAL MACRO/32             R-04 11/27/90
         TINFO allows an MTM user to display information on any task currently
         loaded, including a status display of all assigned logical units.
         General task information is first, including load file name, task and
         system space memory usage, and priority.  This is followed by a line
         for each LU assigned, in a format resembling the DISPLAY LU command,
         but with more data.
0        IUG0141: WAITUNTL - WAIT UNTIL A SPECIFIED TIME OF DAY
         Category: UTIL        Language: CAL MACRO/32             R-00 08/22/85
         WAITUNTL accepts a time of day start parm in a user-friendly format,
         converts it to a seconds-from-midnight value, and calls
         SVC 2 code 10 to wait until that time is reached.  An option is
         provided to either wait or not if it is past the specified time.
0        IUG0142: ZAPVCF - SEND ABORT MESSAGE TO VCF UTILITY
         Category: UTIL        Language: CAL MACRO/32             R-00 10/17/85
         ZAPVCF will recover the system console for command input if an
         unrecoverable error occurs on a terminal attached to VCF (the Virtual
         Console Facility).  Such an error would prevent commands from being
         entered to OS/32 anywhere, including commands to cancel VCF itself.
         By running this program at an MTM terminal one can command VCF to
         abort itself.  Password protection will prevent unauthorized use of
         this utility.
0        IUG0143: DDSTAT - DISPLAY DEVICE STATUS FOR ANY DEVICE
         Category: UTIL        Language: CAL MACRO/32             R-00 10/17/85
         DDSTAT will continuously display the hardware status of any device in
         the system, using the SSR instruction.  The status byte and
         descriptive messages will be logged to the user CRT 4 times per
         second, allowing one to detect error, busy, and offline status
         immediately as they occur.  A start parm specifies the device, if
         interactive both read and write side status are displayed.
0        IUG0144: DEVICE - A DEVICE INDEPENDENT GRAPHICS DRIVER
         Category: UTIL        Language: FORTRAN                  R-01 03/03/88
         This set of programs is an interface to graphics devices which allows
         one to write graphics primitives to several devices without regard to
         the specific device.  The salient features are the low overhead,
         transportability, speed and expandability.  In addition to the usual
         primitives such as 'polygon', higher level functions such as 3D
         contouring and surface plotting are available.  Supported by this
         release are Plot10 compatible devices, printers, Calcomp plotters and
         the Lexidata 3400 & 8100 series.  The next release will include the
         IBM-PC, Hewlett Packard 7500 and the Lexidata 3700 series devices.
0        IUG0145: A FULL DUPLEX CRT DRIVER
         Category: OS&L        Language: CAL Macro/32             R-01 03/30/89
-        2-8                   INTERCHANGE PROGRAM LIBRARY
1
0        A full duplex PALS/PASLA/COMM-MUX driver for use with CRT's and like
         devices.  Supporting ASCII, IMAGE or BINARY modes.  Separate DCB's are
         required for the read side (even address) and write side (read address
         +1).  Because it is a full duplex driver it allows you to post a
         proceed read followed by a write without first halting the read.  This
         driver is incompatible with MTM.  Lack of options is traded for full
         duplex operation and less processor load.
0        IUG0146: LIST COBOL PROGRAMS WITH CROSS REFERENCING
         Category: UTIL        Language: COBOL                    R-00 01/29/86
         This program provides a COBOL output listing with cross reference
         numbers in the text lines.  Reference line numbers of data names noted
         in the source will appear in the space at the right hand side of the
         text.  Reference line number of procedure names noted in the source
         will appear between the line number and the actual text.
0        IUG0147: ATFDECOD - PRODUCE DETAILED LISTING OF MTM ACTIVITIES
         Category: UTIL        Language: FORTRAN                  R-01 06/05/86
         ATFDECOD decodes the MTM account transaction file.  The amount of
         information provided is extensive.  It may be optionally limited to a
         specified account.
0        IUG0148: LINKAT - A ROUTINE TO RETRIEVE A TASK'S LINK TIME
         Category: UTIL        Language: FORTRAN                  R-01 06/05/86
         A FORTRAN subroutine to retrieve the date and time a task was linked.
         Useful for configuration control.
0        IUG0149: TXCMDP/RXCMDP - SEND COMMANDS TO OS CONSOLE FROM MTM
         Category: UTIL        Language: FORTRAN                  R-01 06/05/86
         A pair of programs which allow an MTM user to send commands to the OS
         console for execution of operator commands.  Based upon the internal
         reader facility.
0        IUG0150: DEVINQ - WHICH TASKS ARE USING A GIVEN DEVICE?
         Category: UTIL        Language: CAL Macro/32             R-00 06/05/86
         An E-Task which when given a device name returns the names of all
         tasks using said device.  Used to find out who has a tape drive
         assigned, or why a disk cannot be marked off.
0        IUG0151: CONEX - CONSOLE EXCHANGE PROGRAM
         Category: UTIL        Language: CAL Macro/32             R-02 08/05/87
         CONEX is a systems utility that allows any MTM terminal to become the
         system console.  It is useful to systems personnel, programmers or
         anyone needing access to the system console.  By swapping certain
         identifying and control information between terminal DCB's, the MTM
         terminal actually becomes the system console and the system console
         becomes the user's MTM terminal.  Another execution of the utility
         restores the original state.  The utility, which will only execute if
         the user has E-task load privileges, is password protected against
         unauthorized use.
0        IUG0152: DIR - DIRECTORY SEARCH FACILITY
         Category: OS&L        Language: CAL Macro/32             R-01 10/02/87
         DIR is a relocatable E-task which creates a pseudo-device DIR:.  A
         user program, which does not require any special privileges, may
         assign this pseudo-device and perform directory reads from any
         existing disc volume.  These requests may be 'wild card'
         specifications, in the same format as the 'display files' command,
         limited only by the user program account privileges.
-                              INTERCHANGE PROGRAM LIBRARY                  2-9
1
0        Supplied with this package are two user programs which use the DIR
         facility.  A 'files' program which allows an MTM user with ACP display
         files capability with account number specification, and a 'space'
         program which reports the amount of disc space occupied by any 'wild
         card' file specification on one or all volumes.
0        Besides being very useful in its own right, DIR is an excellent
         example of the power of intercepts to extend the OS capabilities.
0        IUG0153: SPELL - A SPELLING UTILITY
         Category: UTIL        Language: CAL Macro/32             R-00 11/28/86
         SPELL was written for people who 'occasionally' doubt their spelling
         of a difficult word.  I find it useful and you may too!  To use SPELL
         in response to the prompt "Enter your 'WORD' >...."  you enter your
         best guess, or alternatively your first suggested spelling may be
         entered immediately thus:  SPELL 'my-word'.  The program responds with
         a screen of 27 words with the closest in the center.  If your word is
         spelled correctly, it is highlighted.  At this point you may enter a
         new word or you may scan forward by entering a '+' or backward by
         entering a '-'.  The spelling dictionary contains 50,000 words.  You
         may edit it to add or delete words at will.
0        IUG0155: DSKSPACE - REPORT USED & FREE DISK SPACE
         Category: UTIL        Language: CAL Macro/32             R-00 05/24/87
         Allows the privileged MTM user to obtain a report on disk space
         availability by volume name.
0        IUG0156: SPY - UNIVERSAL SVC INTERCEPT PROGRAM
         Category: UTIL        Language: CAL Macro/32             R-00 05/24/87
         A utility which allows the user to dynamically specify a task or
         device on which SVC interception is to be performed.  The user may set
         the SVC type, the task or device to be intercepted, the intercept
         mode, etc.  A help screen is provided.
0        IUG0157: PANIC - INTERACTIVE PANIC DUMP ANALYZER
         Category: UTIL        Language: CAL Macro/32             R-00 05/24/87
         A utility which allows the the experienced user to analyze panic
         dumps.
0        IUG0158: DVRT - OS32 DRIVER TEST PROGRAM
         Category: UTIL        Language: CAL Macro/32             R-00 05/24/87
         A utility which allows the experienced user to test drivers.
0        IUG0159: CSSSYNC - SYNCHRONIZE CSS WITH FOREGROUND TASKS
         Category: UTIL        Language: CAL Macro/32             R-01 02/12/92
         An E-Task which can be used to synchronize the execution of a CSS with
         end of task on one or more foreground tasks.
0        IUG0160: CALPOST - REPORT ASSEMBLY ERRORS TO USER TERMINAL
         Category: UTIL        Language: CAL Macro/32             R-01 07/14/89
         A handy utility which post processes the CAL listing, reporting all
         errors to the users terminal.  No more searching 'F /** /1,1-'!  Very
         nice.
0        IUG0161: OS/32 AND UTILITY DEVELOPMENT CSS PROCEDURES
         Category: UTIL        Language: CAL Macro/32             R-01 07/14/89
         A package which builds all the CSS's used in the assembly, compilation
         and linkage of the OS/32 modules, drivers and utilities.  Includes a
         SNOBOL4 interpreter.
-        2-10                  INTERCHANGE PROGRAM LIBRARY
1
0        IUG0162: MTM/RELIANCE INTERFACE BRIDGE
         Category: UTIL        Language: CAL Macro/32             R-00 05/28/87
         This package provides a means to move between MTM and local or remote
         Reliance systems.  Requires revision 8.2 of MTM.
0        IUG0163: REGTRACK - MONITOR EXECUTION ADDRESS AND REGISTER CONTENTS
         Category: UTIL        Language: CAL Macro/32             R-00 05/28/87
         A program which periodically reports the execution address and
         register contents.  This program requires a separate precision
         interval clock.  The interval is typically set to a very small value,
         perhaps 8 microseconds between samples.  This utility is used to track
         down really nasty problems.
0        IUG0164: WATCH9 - MONITOR A MEMORY LOCATION AND CRASH IF MODIFIED
         Category: UTIL        Language: CAL Macro/32             R-00 05/28/87
         A program which from an APU continuously monitors a memory location.
         If any change in its contents occurs the system is immediately
         crashed.  Hopefully a study of the subsequent panic dump will permit
         you to determine the responsible party.
0        IUG0165: MICRO EMACS - A FULL SCREEN EDITOR
         Category: UTIL        Language: C                        R-03 05/01/89
         An implementation of microEmacs, somewhat less than the full EMACS,
         yet very impressive.  In particular it allows you to edit 2 or more
         files at the same time.  Wonderful for simultaneously displaying your
         assembler/compiler listing and your source code for correction.
         Includes a terminal capability description file into which you may
         edit a description of your particular terminal, permitting microEmacs
         to correctly use its features.
0        IUG0166: PROFF - A TEXT FORMATTER
         Category: UTIL        Language: C                        R-00 07/11/87
         PROFF is a text formatter based on the format utility presented in
         Software Tools.  In addition to the minimum expected features of a
         formatter, PROFF supports Roman numeral page numbering, table of
         contents generation, macros, variables, output of special escape
         sequences to configure printers and more.
0        IUG0167: NJIT PASCAL COMPILER/INTERPRETER/CODE GENERATOR V5.91
         Category: OS&L        Language: Pascal & CAL Macro/32    R-00 07/11/87
         New Jersey Institute of Technology (NJIT) Pascal is a compiler for
         standard Pascal as defined by Jensen & Wirth in the "Pascal Users
         Manual and Report", Springer-Verlag, New York, 1975.  It offers two
         methods of compilation, one that generates reasonably efficient series
         32 machine code, and the other which creates P-code for an interpreter
         which provides a good debugging environment and fast compilation
         times.
0        IUG0168: SWEEP - V2.27
         Category: UTIL        Language: Ratfor                   R-01 01/27/90
         SWEEP is a utility running under OS/32 that provides an interactive
         environment for the routine house-keeping tasks associated with
         maintaining disk files.  The following features are provided:  1..A
         sorted list of the user's files is created that allows files to be
         worked with individually and in groups.  2..An individual file or a
         group of files can be copied, deleted, or printed.  3..Individual
         files can be viewed at the terminal 20 lines at a time.  4..Groups of
         files can be formed by moving through the list and tagging the ones to
         be included or by using a single command to tag all files having a
-                              INTERCHANGE PROGRAM LIBRARY                 2-11
1
0        particular character string in their directory entry.  5..The files
         can be ordered by name, extension, or date last written in either
         ascending or descending order.  6..A directory listing sorted in any
         of the above ways can be sent to the user's terminal, a printer, or a
         file.  The directory listing can include the complete directory
         information as supplied by MTM's Display Files command or an
         abbreviated discription with filenames listed in 1, 2, or 3 columns.
         7..An inventory of files can be generated which lists the disk space
         taken by all files over a specific number of bytes choosen by the
         user, files grouped by file name extension, files grouped by age in
         days.  8..The disk space taken by files is available.
0        IUG0169: OSFILE - OS/32 FILE UTILITY
         Category: UTIL        Language: CAL Macro/32             R-00 08/05/87
         The OS/32 File Utility (OSFILE) performs three functions:  delete,
         reprotect or rename.  Single- or multiple-filename requests may be
         entered, in the same format as the operator "DISPLAY FILES" command.
         Requests can be limited by number of records or by date (either
         created, last written or last assigned).  If specified, non-zero
         read/write protection keys can be ignored.  In addition, a "list only"
         function is available, whereby the current utility function will not
         be performed on matching filenames.
0        IUG0170: PROG
         Category: UTIL        Language: CAL Macro/32             R-00 08/05/87
         PROG will tell you the file name of the task which is running under
         the name which is entered in the START command.
0        IUG0171: VOLUME DESCRIPTOR REBUILD
         Category: UTIL        Language: Pascal                   R-00 08/05/87
         In many cases when a problem occurs with a disc volume that has been
         damaged, it is only the integrity of the data in the volume descriptor
         that has been lost.  The volume descriptor contains pointers to the
         disc structures that are necessary to read files on the disc.
         Fortunately there is usually enough redundant information on the disc
         to reconstruct the volume descriptor but the effort required to do so
         manually can be prohibitive.  The process of reconstructing the volume
         descriptor is mechanical enough that this task can be performed
         automatically.
0        IUG0172: LISTAUF - LIST INFORMATION FROM THE MTM AUF FILE
         Category: UTIL        Language: FORTRAN                  R-00 08/05/87
         The LISTAUF program will list file information from the MTM authorized
         user file to a user specified file or device.  The following
         information from the AUF is displayed:  account #, group account #,
         ascii-password, userid, password mnemonic representation (if
         non-printable char(s) ).
0        IUG0174: LISTINP - LIST LAST INPUT LINE FROM BIOC TERMINALS
         Category: UTIL        Language: CAL MACRO/32             R-00 10/23/87
         LISTINP displays the last input line read from all BIOC terminals in
         the system.  It makes use of a special buffer used by the BIOC
         control-C function.
0        IUG0175: ERRSTAT - CHECK STATUS OF ERROR RECORDING FILE
         Category: UTIL        Language: CAL MACRO/32             R-00 10/23/87
         ERRSTAT examines the system error recording file and displays the
         number of records in use and the total number of records.  Used
-
         2-12                  INTERCHANGE PROGRAM LIBRARY
1
0        periodically, it will provide more warning than the OS about a pending
         wraparound condition on the error recording file.
0        IUG0176: TEXT MANIPULATION UTILITIES
         Category: UTIL        Language: CAL MACRO/32             R-00 03/02/88
         SHIFT shifts the contents of a file right or left by a specified
         amount within a window replacing the vacated positions with a
         specified byte.  ROTATE rotates the contents of a file right or left
         by a specified amount within a window.  LEFTJUST left justifies a
         specified window in a file.  RITEJUST right justifies a specified
         window in a file.  CRYPT encrypts and decrypts a file to keep its
         contents secret.  ATOE translates a file from ASCII to EBCDIC, while
         ETOA does the opposite.  There is more to come.
0        IUG0177: ACCTMON - AN ACCOUNTING MONITOR
         Category: UTIL        Language: CAL MACRO/32             R-00 03/03/88
         ACCTMON is an accounting monitor which operates by comparing
         differences in the accounting information for tasks and discs over a
         specified time period.  It is oriented towards a periodically
         refreshing display on an OWL terminal.  ACCTMONR is a functional
         variation whose output is intended for a spool file or printer so that
         no limitations on the vertical height of display are imposed.
0        IUG0178: FASTLINK - A HIGH SPEED LINKER
         Category: UTIL        Language: CAL MACRO/32             R-00 03/03/88
         FASTLINK is a modification to LINK/32 which reduces by up to 260 times
         the I/O from object libraries during the link process.  This is
         accomplished by preprocessing once the sites object libraries
         effectively blocking them by 260.  Thus a single I/O will bring in 260
         126 byte object records.  Unblocked object libraries are recognized
         and used correctly, although no speedup will be obtained.  Thus
         FASTLINK is a functional replacement for LINK/32.  Library blocking is
         done by SINGLE.CSS whose operation is self explanitory.  Blocked
         libraries will have a record length of 32,760 with a data block size
         of 128 and an index block size of 1.
0        IUG0179: SCHEDULE
         Category: UTIL        Language: FORTRAN                  R-03 11/11/91
         Allows the user to submit to the command processor commands or CSS's
         at a particular time of day.
0        IUG0180: DISPLAY FILES WITH TIMES
         Category: UTIL        Language: FORTRAN                  R-00 05/17/88
         A Display Files processor which includes the last assigned date.
0        IUG0181: START COMMAND OPTION PROCESSOR FOR FORTRAN
         Category: UTIL        Language: FORTRAN                  R-02 04/27/91
         Processes format ST, [COMmand/CMD=fd:],[Log=fd:],[List=Con:]  making
         the appropriate assigments.
0        IUG0182: VCF UTILITY
         Category: UTIL        Language: FORTRAN                  R-02 04/27/91
         Allows an MTM user to issue commands to the system console and receive
         the command output at the user's terminal.  Uses the OS/32 command
         processor's logging capability to capture and re-route the command
         processor's output.
0        IUG0183: REBOOT
         Category: OS&L        Language: CAL Macro/32             R-01 10/10/88
-                              INTERCHANGE PROGRAM LIBRARY                 2-13
1
0        An E-Task which allows a privileged remote or local user to reboot the
         operating system.  Optionally the users terminal can assume the role
         of the console upon upon reboot.  In addition the user can hand modify
         locations in the OS before execution begins.  Not a tool for novices!
0        IUG0184: STARPACK 2.07
         Category: MATH        Language: FORTRAN                  R-00 07/18/88
         STARPAC is a portable library of approximately 150 user-callable ANSI
         77 FORTRAN subroutines for statistical data analysis.  Designed
         primarily for time series analysis and for nonlinear least squares
         regression, STARPAC also includes subroutines for normal random number
         generation, line printer plots, basic statistical analyses and linear
         least squares.  Emphasis has been placed on facilitating the
         interpretation of statistical analyses, and, for this reason,
         comprehensive printed reports of auxiliary statistical information,
         often in graphical form, are automatically provided to augment the
         basic statistical computations performed by each user-callable STARPAC
         subroutine.  STARPAC thus provides the best features of many
         stand-alone statistical software programs within the flexible
         environment of a subroutine library.
0        IUG0185: COLLECTED EBCDIC/ASCII CONVERSION ROUTINES
         Category: UTIL        Language: Various                  R-01 01/01/84
         Subroutines to perform conversions between EBCDIC and ASCII.
0        IUG0186: TO32 - REPLACE CAL COMMON MODE WITH 32 BIT INSTRUCTIONS
         Category: UTIL        Language: CAL/Macro 32             R-00 08/24/88
         Replaces CAL common mode instructions with 32-bit instructions in CAL
         and Macro source.  Also translates macro library source.  Why does
         LDAI translate to LA but CLAI translate to CLI.  Who cares!
0        IUG0187: PURGACC/IOACT - I/O ACTIVITY STATISTICS
         Category: UTIL        Language: C                        R-00 10/21/88
         PURGACC is a mechanism for collecting OS/32 accounting statistics from
         active tasks on a periodic basis.  IOACT is a report generator for i/o
         activity statistics gathered in ATF files which can support an
         essentially unlimited number of i/o classes.
0        IUG0188: OS/32 STRUCTURES IN C
         Category: UTIL        Language: C                        R-00 10/21/88
         Miscellaneous headers/modules for OS/32 structures in C.
0        IUG0189: DUMP - INTERACTIVE PANIC DUMP ANALYSER
         Category: UTIL        Language: MACRO/32                 R-02 06/28/91
         DUMP is a program that helps you analyze panic dumps from OS/32
         systems.  You can also use it to look at the current memory on a
         running system.  DUMP will also work on any contiguous file or
         anything which looks like a contiguous file, such as a bare disc.
         With DUMP you examine/modify memory or disk files, display systems or
         user defined structures, display which tasks are loaded, display
         memory utilization, display accounting information, display device
         information, display disk information, search memory, disassemble
         code, display lu's assigned to a task, toggle between memory and a
         disk file, list files, copy panic dump from tape to disk, snap memory
         image to disk, display system journal, display APU/IOP information,
         display task/system registers, do hex/decimal arithmetic and
         conversions, equate memory locations to symbols, read system map, find
         system modules, display MTM users, display general information about
         system, display system pointer table and there is more.  Its use is
-        2-14                  INTERCHANGE PROGRAM LIBRARY
1
0        not limited to operating system analysis, it may be used in the
         analysis of problems in user tasks as well.  Clearly this is a tool
         for the experienced user.
0        IUG0190: LJWYSE - LASER PRINTER/TERMINAL UTILITY
         Category: UTIL        Language: MACRO/32                 R-00 03/28/89
         Provides a means to send printouts to a laser printer attached to a
         terminal.  Primarily intended to provide printer service to a remote
         site on a modem through the use of the printer port of a WYSE60
         terminal with a connected HP LaserJet series II.  This is accomplished
         by prefixing the listing with the necessary sequences to place the
         terminal in transparent print mode, set up the printer by selecting
         fonts, page specifications, etc and restoring the terminal to normal
         operation after print is completed.  The user may readily modify the
         program to include the particular sequences required for their
         terminal/printer combination.
0        IUG0191: SPL/32 - INPUT/OUTPUT SPOOLER
         Category: UTIL        Language: PASCAL                   R-00 07/14/89
         CCUR has dropped SPL/32 effective with the release of OS/32 Rev 8.3.
         Those who desire advanced spooler capabilities may want to consider
         CUSP as an optional extra cost product available from CCUR.  The
         Interchange Library has been given the complete SPL/32 packages in
         order to provide it to those who care to continue to use and self
         maintain SPL/32.  This package includes source, in PASCAL and
         MACRO/32, as well as documentation in TEXT/32 format.  SPL/32 is
         designed to improve handling of input/output processes to low speed
         devices.  It provides advanced capabilities for configuring and
         dynamically altering the output spooling environment.
0        IUG0192: HERCULES UTILITIES
         Category: UTIL        Language: FORTRAN/MACRO32          R-00 07/31/89
         A collection of utilities from Hercules Incorporated.  TUSE/DUSD/DUSE
         are routines that estimate how many feet of Backup tape or how many
         sectors will be used by a file select list.  CSORT is a FORTRAN
         implementation of the QUICKSORT algorithm.  VERIFx series of programs
         are used for comparing files, side by side, binary, hex or ascii.
         EXCON exchanges an MTM terminal with the OS console.  SNDMSG can be
         used from an MTM terminal to send messages to tasks, such as MTM or
         SPL.  XRF7 makes a cross reference from FORTRAN source.  ENEX makes a
         cross reference of one or more relocatable binary object files.
         BINLIST makes a hex listing of an object file underlining the command
         bytes.
0        IUG0193: QCHEK - CHECK TASK QUEUE DEPTH
         Category: UTIL        Language: MACRO/32                 R-00 11/20/89
         QCHEK displays the task queue depth for all tasks in the system.  If
         a number is passed in the start string only those tasks having a queue
         depth greater or equal to that number will be displayed.
0        IUG0194: SPOOLER MONITOR
         Category: UTIL        Language: MACRO/32                 R-00 01/17/90
         Through the MTM foreground the user may send commands to the OS/32
         spooler and receive the output on their MTM terminal.
0        IUG0195: CALENDAR DATE GENERATION ROUTINES
         Category: UTIL        Language: Fortran & C              R-01 04/27/91
         Routines used to generate, maintain and convert dates from and to
         julian and month/day/year format.  The base year is Jan/01/1800.
-                              INTERCHANGE PROGRAM LIBRARY                 2-15
1
0        IUG0196: USER CONTROL FACILITY
         Category: UTIL        Language: Source not provided      R-02 04/27/91
         User Control Facility (UCF) is a signon processor running under MTM.
         Included are a user file maintenance utility, signon processor,
         SYSINIT.CSS files and a 40 page document.  Designed to run under OS/32
         R08-03 but contains support for R08-02.  UCF enables tailoring the
         access a user has to devices by user device groups.  The users
         privileges are tailored to the user rather than to the account.
0        IUG0197: LS FOR OS/32
         Category: UTIL        Language: C                        R-03 11/11/91
         LS is used to perform a display file based upon multiple file
         descriptor masks.  The package allows a user to display the filename,
         file type, blocking factors, record lengh, file size, time created,
         written and last assigned, and the keys in any order or combination
         the user desires.  Headings may be omitted and the filenames may be
         formatted without blanks.  OS/32 8.3 is the minimum revision required.
         The output may be redirected with the command line redirection symbol
         '>'.
0        IUG0198: MACSHORT - SHORTEN MACRO LIBRARY SOURCE
         Category: UTIL        Language: CAL Macro/32             R-01 07/22/85
         Shortens Macro Library source by removing superfluous text.  Macro/32
         will execute more quickly when using such a library.
0        IUG0199: ANSITAPE - UNPACK ANSI STANDARD LABELED TAPE
         Category: UTIL        Language: CAL Macro/32             R-06 01/16/87
         Unpack ANSI standard labeled tape in formats F (fixed length blocked
         records), D (variable length blocked records) and U (nonstandard line
         feed terminated records).  Currently multi-file single-volume format
         is handled.
0        IUG0200: HLAL2 - HIGH LEVEL ASSEMBLER LANGUAGE MACROS
         Category: OS&L        Language: CAL Macro/32             R-08 02/18/87
         The HLAL2 macros provide structured programming similar to high level
         languages.  In addition to structure statements like IF-ELSE-ENDIF,
         LOOP-ENDLOOP, WHILE-ENDWHILE, REPEAT-UNTIL, & CASE-WHEN-ENDCASE,
         appropriate service macros are provided for entry and exit of modules.
         Module entry and exit provide a means of passing parameters as well as
         controlled stacking and unstacking of registers and providing dynamic
         storage.  Conditional and unconditional exits from labeled enclosing
         loops are provided by LEXIT and LEXITIF.  A utility program formats
         the assembler listing output for easy reading.
0        IUG0201: SEARCH
         Category: UTIL        Language: MACRO/32                 R-01 07/22/91
         Searches a set of files selected with display files format, including
         wildcard selection, for a specific string producing a report.
0        IUG0202: FREEMEM - REPORT ON FREE SYSTEM SPACE & TASK MEMORY
         Category: UTIL        Language: MACRO/32                 R-00 01/26/90
         An E-Task which reports the amount of free system and task memory in
         KB and by blocks.
0        IUG0203: IFTASKX - IF TASK EXISTS
         Category: UTIL        Language: MACRO/32                 R-00 01/26/90
         An E-Task which determines if a named task is currently loaded.
-
0        2-16                  INTERCHANGE PROGRAM LIBRARY
1
0        IUG0204: TSKTRACE
         Category: UTIL        Language: MACRO/32                 R-00 01/26/90
         An E-Task which provides a coarse trace function.  It samples once a
         second to determine which task is executing.  After 100 samples a
         report is generated.
0        IUG0205: SVC1INT3 - INTERCEPT SVC1'S TO A REAL DEVICE
         Category: UTIL        Language: MACRO/32                 R-00 11/16/90
         SVC1INT3 is a CAL/32 program which intercepts SVC1 I/O to a specified
         existent real device.  The SVC1 block is output to the log file, along
         with any data read or written (in a COPY32 Display format).  This is
         NOT as good as an independant datascope, but for many communication
         interface problems it is sufficient.
0        IUG0206: RAMDISK - QUICKLY INITIALIZE RAMDISK WITH DATA
         Category: UTIL        Language: MACRO/32                 R-00 11/16/90
         The RAM disk is first initialized with the static files using BACKUP.
         The RAM disk is then marked off and using this program an image of the
         RAM disk is written to a contiguous file.  When the RAM disk is to be
         restored this program will read that image to the RAM disk with a
         single SVC1 Read (directory, bitmap, data, everything!).
0        IUG0207: DUSEUTIL - ANALYZE DISK PERFORMANCE
         Category: UTIL        Language: MACRO/32                 R-00 11/16/90
         DUSEUTIL is used to study the traditional I/O bound or CPU bound
         problem of tasks.  The accounting data from the OS gives disk reads,
         writes, and seeks; but DUSEUTIL attempts to measure (statistically)
         the actual disk usage.  It is also helpful to display contentions when
         there are shared controllers or selches.
0        IUG0208: DIOSREAD - SEARCH FOR AND DISPLAY DIOS DCB'S
         Category: UTIL        Language: MACRO/32                 R-00 11/16/90
         DIOSREAD is an E-Task which will look thru the DMT and corresponding
         OS/32's DCBs for DIOS (DMA I/O Subsystem) devices.  When located each
         DIOS's device DCB (not to be confused with OS/32's device DCB) is
         written to the pre-assigned logical unit.  Interupts are disabled, the
         16 halfwords of a DIOS's device DCB are read, interupts are
         re-enabled, and the halfwords are formatted and output to log device.
         It is necessary to disable interupts to prevent a mis-interpreted DIOS
         interupts.  Because of timing requirements, interupts must be
         re-enabled between each device's reads.
0        IUG0209: ADDRESS - SEARCH FOR ALL RESPONDING DEVICES
         Category: UTIL        Language: MACRO/32                 R-00 11/16/90
         ADDRESS is an E-Task which does a sense status to each possible device
         address on the system 1-1023 and outputs records of devices which
         respond.  Useful when making system changes or debugging device
         problems.
0        IUG0210: CMONUTIL - C-CALLABLE TRAP HANDLING LIBRARY
         Category: UTIL        Language: MACRO/32                 R-01 02/12/92
         A collection of C-Callable routines written in MACRO/32 including a
         routine which may be placed between main and code to process a trap
         queue item.  This routine permits a trap driven monitor task to be
         written in C.  The collection also includes stack and memory snapshot
         routines.
0        IUG0211: DUMPTASK - DO A TASK MEMORY DUMP
         Category: UTIL        Language: MACRO/32                 R-00 01/03/91
-                              INTERCHANGE PROGRAM LIBRARY                 2-17
1
0        DUMPTASK displays task information and impure data to the selected
         output device, generally a printer although file or terminal output
         may be specified if desired.  Task information includes the name of
         the program file and its link time, memory allocation, TSW and
         register values, and assigned LU information.  Task information is
         followed by a side-by-side hex/ASCII dump of the impure area assigned
         to the task.  This dump may be either narrow (80 columns of output, 16
         bytes of data, per line) or wide (120 columns of output, 32 bytes of
         data, per line).  Usually the attributes of the output device
         determine the format.  Multiple lines of identical content are
         compressed in either format.
0        IUG0212: LIMS SELECTIVE DATA SET MAINTENANCE
         Category: LIMS        Language: Fortran                  R-00 04/19/91
         Essentially identical in function to the standard LIMS data set
         maintenance program, this package offers access to selective data sets
         on a per user basis as well as offering enhanced performance on range
         list processing.
0        IUG0213: OS/32 C ENHANCEMENT LIBRARY
         Category: OS&L        Language: CAL Macro/32 & C         R-01 11/11/91
         Enhances C by providing SVC, Task Queue and Intercept functions.
0        IUG0214: MULTI-FILE SEARCH UTILITY
         Category: UTIL        Language: CAL Macro/32 & Fortran   R-00 07/03/91
         Searches multiple files (optionally using wild card specificiations)
         for all occurances of a string.
0        IUG0215: XYSTATS - STATISTICAL AYALYSIS
         Category: UTIL        Language: Fortran                  R-00 02/21/92
         Performs general statistics, such as the mean, standard deviation,
         relative standard deviation and coefficients of correlation on up to
         100 pairs of data.  The program has built in help.
0        IUG0216: DUMPCOPY - PANIC DUMP TAPE TO DISC
         Category: UTIL        Language: MACRO/32                 R-00 02/21/92
         Reads a panic dump tape, issuing up to 32 proceed reads to keep the
         tape streaming, generating a disk file using multi-record I/O to
         improve performance.
0        IUG0320: SCIENTIFIC SUBROUTINE PACKAGE
         Category: SCIE        Language: FORTRAN                  R-01 04/09/84
         A total of 356 subroutines provide a broad base of computational
         routines.  All routines are accessible by simple FORTRAN calls.  All
         data is transmitted via the arguments in the call and none cause input
         or output directly, resulting in device independent service for the
         user.
0        IUG0323: MOTOROLA M6800 CROSS ASSEMBLER
         Category: OS&L        Language: CAL                      R-00 02/24/81
         This assembler accepts source code for the M6800 in the standard
         Motorola format.  The operand data identifiers H, O & B are not
         permitted, however the leading identifiers $, % and @ are, allowing
         compatibility with existing Motorola source programs.  Additionally
         conditional assembly is supported.  A listing and unsorted symbol
         table is produced.
0        IUG0338: CSMP - CONTINUOUS SYSTEMS MODELING PROGRAM
         Category: UTIL        Language: Fortran                  R-00 01/28/90
-        2-18                  INTERCHANGE PROGRAM LIBRARY
1
0        This program is designed for modeling and evaluating the performance
         of continuous systems described by time dependent, non-linear
         differential equations and/or transfer functions.
0        IUG0344: PSEUDO-RANDOM NUMBER GENERATOR SUBROUTINE PACKAGE
         Category: MATH        Language: CAL                      R-00 07/25/75
         Package consists of a set of subroutines for sampling from the
         uniform, Gaussian and exponential distributions.  Mathematical proofs
         for algorithms used exist in the mathematical literature.
0        IUG0347: 1130 COMMERCIAL SUBROUTINE PACKAGE
         Category: MATH        Language: FORTRAN                  R-00 09/18/75
         Subroutines as detailed in the IBM 1130 Commercial Subroutine
         Programmers Guide H20-0241-3 plus several commonly used additions and
         a SORT/MERGE routine.  Most of the routines have corresponding test
         programs in an included test file.
0        IUG0348: CANONICAL CORRELATION ANALYSIS
         Category: MATH        Language: FORTRAN                  R-00 02/24/81
         Designed to provide the facilities to study experimental results
         without restrictions of traditional analytic methods.  Allows the user
         to study the effects of various groupings of variables.
0        IUG0349: NONPARAMETRIC STATISTICAL ANALYSIS
         Category: MATH        Language: FORTRAN                  R-00 11/15/75
         The facilities provided by this program for analyzing data are those
         procedures that involve the use of contingency or cross-classification
         frequency tables.
0        IUG0359: SNAPSHOT DUMP
         Category: UTIL        Language: CAL                      R-00 01/01/84
         Prints Hex and ASCII equivalent data from a starting through an ending
         address.  Adjacent identical lines are suppressed.
0        IUG0365: BASIC I
         Category: OS&L        Language: CAL                      R-00 01/01/84
         A BASIC interpreter written as a reentrant package providing multiuser
         capability and file handling features.
0        IUG0375: SORT
         Category: UTIL        Language: CAL                      R-00 01/01/84
         The records are sorted in place without using a work area.  The
         routine half-divides a given set of records into two halves so that
         all the records in the low half are less than those in the high half.
         The routine is called repeatedly.  When the small half is eleven
         records or less it is sorted by pairwise swapping and the previous
         half is examined.
0        IUG0378: SNAP
         Category: UTIL        Language: CAL Macro/32             R-00 01/01/84
         Allows the programmer to monitor general registers and storage while
         the application is executing.
0        IUG0388: CONTINUOUS MODELING PROGRAM
         Category: MATH        Language: FORTRAN                  R-00 01/01/84
         An implementation of the IBM 1130 Continuous Modeling Program Version
         I.
-
0                              INTERCHANGE PROGRAM LIBRARY                 2-19
1
0        IUG0390: TAPE BLOCKING/DEBLOCKING SUBROUTINES
         Category: UTIL        Language: CAL                      R-00 01/13/82
         A series of subroutines intended for use with either COBOL or FORTRAN.
         Optional double buffering for improved performance.  This is a well
         written and documented package.
0        IUG0404: SPEDIT - SUPER EDIT
         Category: UTIL        Language: CAL MACRO/32             R-05 11/03/85
         SPEDIT is an online interactive text editor designed to create and
         modify character oriented text stored on any input medium.  SPEDIT is
         operator directed through a keyboard device.  A version using VTM/32
         is provided permitting the user to edit files as large as 4 MB while
         loaded in a task space of about 200 KB.
0        IUG0413: P4 PASCAL SYSTEM
         Category: OS&L        Language: Pascal & CAL             R-03 02/24/81
         The P4 Pascal compiler, written in Pascal, was designed to be
         independent of any existing machine.  The compiler translates Pascal
         source programs into P4 assembly language.  This is subsequently
         assembled by an assembler written in CAL and executed by an emulator.
0        IUG0424: ATE
         Category: UTIL        Language: CAL                      R-00 01/01/84
         The Algorithmic Text Editor is a text editing interpreter developed to
         provide an open-ended approach to text editing.  Designed to be easy
         to use for manually controlled editing, ATE will also run under
         control of preprogrammed input strings.  One application that has
         proven most useful is extending CSS capability.  The users manual,
         provided on tape, contains several such CSS examples as well as
         general information and tutorial examples.
0        IUG0425: COSY1632
         Category: UTIL        Language: CAL                      R-00 01/01/84
         ASCII data compression and expansion programs provide about 3 to 1
         compression on common program text.
0        IUG0426: PARTIAL VOLUME PROTECTION
         Category: UTIL        Language: CAL                      R-00 01/01/84
         Partial Volume Protection scheme allows an area of a single MSM volume
         to be write-protected while the remainder of the volume may be written
         to.
0        IUG0428: FORTRAN V LEVEL I COMPILER AND RUN TIME LIBRARY
         Category: OS&L        Language: CAL                      R-00 02/09/81
         FORTRAN V 16 & 32-Bit compiler in source.  32-Bit source for the Run
         Time Library plus 30 test programs and a description of the package on
         magnetic media.  There are no manuals available.
0        IUG0443: SUBFILER
         Category: UTIL        Language: CAL                      R-00 01/01/84
         A filing system which packages many files onto one file with a
         systematic retrieval method.
0        IUG0444: PPI DRIVER
         Category: OS&L        Language: CAL Macro/32             R-00 01/01/84
         Processor to Processor interface driver.
0        IUG0446: USEFUL COBOL CALLABLE SUBROUTINES
         Category: UTIL        Language: COBOL, CAL Macro/32      R-04 09/21/87
-        2-20                  INTERCHANGE PROGRAM LIBRARY
1
0        COBOL subprograms which provide fast sequential read/rewrite access to
         contiguous files with automatic blocking to 64, 128 and 256 byte
         records.  To edit numeric strings in connection with the ACCEPT
         statement.  To pass start parameters to a COBOL program.  To provide
         cyclic wakeup to a COBOL program.  To expand two letter state
         abbreviations.  To assign and deassign files and devices from within
         a COBOL program.  To do cursor placement, image reads and writes to
         CRT.  To to ASCII to EBCDIC and EBCDIC to ASCII conversion of a
         buffer.
0        IUG0447: OPERATING SYSTEM MONITOR - SYSMON83
         Category: UTIL        Language: CAL Macro/32             R-08 12/30/90
         Continuous graphic display of system activity on a CRT.  Currently
         supporting OS32/MT Rev 7.2, 8.1, 8.2 and 8.3.  A new enhancement makes
         the ZOOM automatic, periodically adjusting itself to make use of the
         full screen as tasks come and go.
0        IUG0455: BATCH
         Category: UTIL        Language: CAL, COBOL               R-01 01/01/84
         Allows an MTM user to create and submit batch jobs with a single
         command.
0        IUG0458: COMMENT
         Category: UTIL        Language: FORTRAN                  R-00 06/30/81
         Aids in commenting Assembly or FORTRAN programs.
0        IUG0460: DISPACK UTILITY
         Category: UTIL        Language: FORTRAN, CAL             R-01 11/19/84
         Packs free space on disc into a single contiguous area requiring
         neither tape nor a second disc.
0        IUG0463: MTMUSERS
         Category: UTIL        Language: CAL Macro/32             R-03 02/21/92
         Allows the privileged MTM user to display the current MTM users, the
         program they are running, their priority, account numbers, privileges,
         etc.
0        IUG0468: TEXT
         Category: UTIL        Language: FORTRAN                  R-00 01/01/84
         Diablo 1620 right justification printing.
0        IUG0469: STUDRAW
         Category: UTIL        Language: FORTRAN                  R-00 06/30/81
         Display OS/32 System Structures graphically.
0        IUG0470: OSVER
         Category: UTIL        Language: CAL Macro/32             R-00 01/01/84
         Log OS/32 Version.  OK, who loaded the wrong OS?
0        IUG0477: CALENDAR GENERATOR
         Category: UTIL        Language: FORTRAN                  R-02 10/20/88
         Prints either a single page or a 12 page calendar, the later with
         optional holidays.  Very nice format.
0        IUG0478: VERSATEC V-07 PLOTTING SOFTWARE INTERFACE
         Category: UTIL        Language: FORTRAN VII              R-02 02/26/82
         A general batch plot program interface for Versatec V-07 plotting
         software.
-
                               INTERCHANGE PROGRAM LIBRARY                 2-21
1
0        IUG0479: DATA BASE SYSTEM FOR INDEXING RESEARCH PAPERS
         Category: UTIL        Language: FORTRAN                  R-00 03/01/82
         This system permits users to index, edit, classify and retrieve
         scientific research paper citations.  The system uses an indexed
         directory look-up file structure.  Reports and statistical summaries
         are produced based on criteria selected by the user.
0        IUG0481: FINDPARM - ISOLATE COMMAND LINE ARGUMENTS
         Category: OS&L        Language: CAL Macro/32             R-04 01/08/87
         A macro used in the processing of a start string.  Upon each
         invocation it returns the ordinal position, and starting address and
         ending address of each parameter.  Skips leading and disregards
         trailing blanks.  A test program is included permitting the user to
         gain an understanding of the macro.
0        IUG0482: TIDY - FORTRAN CLEANUP ROUTINE
         Category: UTIL        Language: FORTRAN                  R-00 05/25/82
         TIDY is a program that edits and improves the readability of FORTRAN
         source code.
0        IUG0483: SYSERR
         Category: UTIL        Language: FORTRAN                  R-05 05/17/88
         Takes the 2 status bytes of the SVC 1 parm block used in the FORTRAN
         RTL and returns an error code to be used with a computed go to.  If
         the error status is not recognized the device dependent status is
         returned as a -1.
0        IUG0484: SCREEN
         Category: UTIL        Language: FORTRAN                  R-05 05/17/88
         Allows a program to move the cursor on the CCUR 550 VDU to any
         location.  All the programmable features of the 550 are supported.
0        IUG0487: TASKDUMP
         Category: UTIL        Language: CAL                      R-00 07/20/82
         An E-Task used to dump out structures associated with tasks, pure
         segments and other items that are displayed on a 'Display Map'
         command.
0        IUG0488: DOCUMENT
         Category: UTIL        Language: FORTRAN, CAL             R-00 07/20/82
         Used to extract documentation from source code such as CAL or FORTRAN
         producing a document with table of contents and index.  Particularly
         useful when a user subroutine library catalog is required.
0        IUG0490: USEFUL FORTRAN CALLABLE SUBROUTINES AND RELATED PROGRAMS
         Category: OS&L        Language: FORTRAN                  R-05 05/17/88
         Parsers..A collection of string manipulation routines, Move..Move
         characters based on addresses, Getadr & Getf7ctr..Get the address of
         arguments.  Osscan..To execute a SVC 2 Code 17, Compdir..Insert
         compiler directives into a source program, Stparms..move start
         parameters to a common block.  Mnenbld..Produces FORTRAN data
         statements that contain a SVC 2 Code 17 scannable table.
         Extfd..Extracts a file name from a buffer and checks for proper
         format.
0        IUG0491: DMPTYP - AN AID TO ANALYZING OS/32MT SYSTEM DUMPS
         Category: UTIL        Language: FORTRAN & CAL Macro/32   R-01 09/15/83
         DMPTYP R01-01 is a program (written mostly in FORTRAN ) which permits
         the interactive examination of System Dump files by an analyst at a
-        2-22                  INTERCHANGE PROGRAM LIBRARY
1
0        terminal.  It permits the calling of command files such as "SPTINIT.".
         The file "SPTINIT."  is included as an example of DMPTYP's
         programmability.  It also contains a Hex calculator which is capable
         of accessing the current System Dump file's memory locations for
         computations.  This is demonstrated by the DMPTYP command file
         "SPTINIT.".
0        IUG0492: DATE FILE SYSTEM
         Category: UTIL        Language: COBOL                    R-00 09/30/82
         This system has as its backbone a three year date file where date
         records point to previous and next working days.  This data base
         allows ratcheting forward or backward using time intervals to
         calculate estimated completion or starting dates.
0        IUG0493: NCAR GRAPHICS SYSTEM, ADAPTED FOR CCUR SYSTEMS
         Category: SCIE        Language: FORTRAN                  R-01 08/30/82
         A graphics package tailored to your CCUR computer.  Easy to use, with
         high level calls to do contour plots, X vs Y plots in many formats,
         surface displays, world continent maps, maps of the U.S.A.  Supporting
         a variety of different plotting devices.  Including fancy text writing
         and 3-dimensional plotting.  With full source code.
0        IUG0495: DISC DIRECTORY AUDIT UTILITY
         Category: UTIL        Language: FORTRAN                  R-01 10/27/82
         Performs an audit of files on a disc, classifying them by account
         number, size, age and file extension.  Produces a summary report which
         allows any user or the system manager to assess disc usage.  Disc hogs
         are quickly revealed.
0        IUG0496: RTMAIN - REAL TIME EVENT CONTROL NUCLEUS
         Category: UTIL        Language: CAL Macro/32             R-00 12/17/82
         RTMAIN is a versatile CAL main-line program that can be used as the
         event control nucleus for many real-time applications.  Used at
         Perkin-Elmer's Optical Group in Danbury CT for a wide variety of
         applications requiring process control or other similar event driven
         systems.  RTMAIN will interface with FORTRAN programs.
0        IUG0499: TESTVOLS - ARE VOLUMES IN START STRING ON LINE?
         Category: UTIL        Language: CAL Macro/32             R-04 08/12/85
         In an application environment which is brought up by a CSS it is often
         critical that specific disc volumes are on line.  This program can
         guarantee this by checking if all volume names passed in the start
         string are in fact on line.  If any volumes named are not on line the
         task reports the error and goes to end with a non-zero return code.
         Errors reported are 'No start parms', 'Missing parm', 'Parm too long',
         'Syntax Error', or 'Volume off line'.
0        IUG0501: SACRAMENTO PEAK OBSERVATORY SUBROUTINE LIBRARY
         Category: SCIE        Language: CAL Macro/32 & FORTRAN   R-03 03/19/85
         45 subroutines making up a Math, RTL and User library to supplement
         the CCUR FORTRAN libraries.  From SVC 2 and SVC 7 interfaces to
         Fourier Transforms.  Includes a how to manual prepared by experienced
         users describing hardware, operating system software, utilities to
         smooth the way for beginning or infrequent CCUR users.  This may serve
         as a guide for the operations manual you were planning to prepare some
         day soon.
0        IUG0502: ACTTAB - SUMMARIZES DISK OCCUPANCY BY ACCOUNT
         Category: UTIL        Language: CAL Macro/32             R-04 04/08/85
-                              INTERCHANGE PROGRAM LIBRARY                 2-23
1
0        A very useful program which assigns directly to a disk and generates
         a listing showing usage of disk space by account number, broken down
         by IN, CO, EC and NB file types.
0        IUG0503: FORTRAN CALLABLE SVC LIBRARIES & TELECOMMUNICATIONS SUPPORT
         Category: OS&L        Language: FORTRAN & CAL            R-08 04/27/91
         Allows SVC calls 1, 2, 3, 4, 5, 6, 7, 9, 14 and 15 with many
         variations from FORTRAN programs.
0        Most data communication applications present a common class of complex
         problems.  Usually a good degree of operating system support is
         required to efficiently implement solutions.  OS/32 provides this kind
         of support through ITAM, Terminal Managers and SVC 15 Line Drivers.
         However the traditional user interface to these facilities, via
         assembly language, is rather complex.  In the past, real programming
         examples were not generally available.  This high level language
         interface package provides solutions to these difficulties.  While
         this package supports asynchronous, synchronous and Ethernet
         communications under OS/32, it also provides the user with a
         comprehensive set of coding examples.  Also included is an SVC
         Intercept implementation of UDP Datagram Sockets for Ethernet and a
         file transfer mechanism for use under OS/32 and Unix systems.
0        IUG0504: MAILBOX - A GENERAL MAIL SYSTEM BASED UPON SVC INTERCEPTS
         Category: UTIL        Language: CAL Macro/32             R-09 09/17/91
         MAILBOX is a system program that provides a generalized, on-line, mail
         facility.  It dynamically creates an intercept device that appears to
         the user as a disc volume.  Besides being valuable in its own right,
         this is an excellent example of the programming of SVC intercepts.
0        IUG0505: PACK/UNPACK FILE COMPRESSION UTILITIES
         Category: UTIL        Language: FORTRAN                  R-01 01/01/84
         PACK and UNPACK are two tasks and associated CSS files developed to
         allow on-line archival storage of source data and programs in
         compressed ASCII format.  These utilities provide for quick, easy
         access to an archived program or data file while minimizing its disc
         storage requirements during periods of low activity.
0        IUG0506: COPYL - OBJECT LIBRARY MAINTENANCE UTILITY
         Category: UTIL        Language: FORTRAN                  R-00 01/01/84
         Beginning with an object library and a file containing one or more new
         object modules this utility will automatically replace modules in the
         library with new modules having the same object label, producing an
         updated library while retaining the original order of the modules.
         Any new modules for which a module of the same name cannot be found in
         the original library will be appended to the updated library.  A
         report is optionally generated.  Checksums are verified.  More
         convenient than LIBLDR.
0        IUG0508: MULTI-FILE DELETE UTILITY
         Category: UTIL        Language: FORTRAN                  R-00 01/01/84
         Invoked by a CSS to process a list of files produced by the OS/32 or
         MTM "Display Files" command.  The output is a CSS file containing
         REP/DEL commands to delete the selected files.  Options are available
         to allow the user veto power on a file by file basis if desired, to
         skip, delete or ask the user for instructions in the case of protected
         files.
-
0        2-24                  INTERCHANGE PROGRAM LIBRARY
1
0        IUG0509: MACROS FOR FORTRAN CALLABLE MACROASSEMBLER SUBROUTINES
         Category: OS&L        Language: CAL Macro/32             R-00 01/01/84
         Macros for FORTRAN VII callable subroutines to generate a program
         statement for the subroutine, start data area, define save areas, end
         data area, generate subroutine entry preamble and exit from routine
         restoring registers.
0        IUG0510: SPYR07 - A TERMINAL SPY
         Category: UTIL        Language: FORTRAN                  R-01 03/18/86
         Tells you what's happening throughout the system.  Uses a little known
         feature of SVC 2.19 (Peek) to spy on other tasks.  Revision R-01 adds
         support for ANSI X3.64/VT100 type terminals.
0        IUG0511: ASK - INTERACTIVE CSS SUPPORT
         Category: UTIL        Language: FORTRAN                  R-00 01/01/84
         FORTRAN program and CSS to allow CSS to ask simple Yes/No questions
         and branch on the response.
0        IUG0512: TSCAN - TAPE SCANNER
         Category: UTIL        Language: FORTRAN                  R-01 09/14/88
         Reads a magnetic tape generating a report of the number of records and
         their length file by file.
0        IUG0513: EXPTAB - EXPAND TABS IN FILES
         Category: UTIL        Language: FORTRAN                  R-00 01/01/84
         Expands an ASCII file which includes imbedded tabs into a formatted
         file.
0        IUG0514: STATLOOP - I/O INTERFACE TESTING
         Category: UTIL        Language: CAL                      R-00 01/01/84
         An E task to perform status loop testing on a half word interface.
0        IUG0515: EXAMPLE DRIVERS FOR SELCH AND NON-SELCH DEVICES
         Category: OS&L        Language: CAL Macro/32             R-00 01/01/84
         Well documented example drivers, for both mux bus devices and EDMA bus
         devices.
0        IUG0516: STRUDIAG - DIAGRAMS STRUC'S FROM CAL SOURCE
         Category: UTIL        Language: CAL Macro/32 & Pascal    R-03 07/22/85
         Extracts data from structure definitions using the instruction STRUC
         and formats it into a structure diagram giving the offset, name, byte
         length and comments of each storage space.
0        IUG0518: BITMAP - SCAN BIT MAP & REPORT ON DISC USAGE
         Category: UTIL        Language: CAL Macro/32             R-03 04/15/85
         An E-task which reads the bitmap and reports the number of sectors and
         percentages which are allocated and free.  The largest contiguous free
         space, and number of allocated and free extents as well as the
         percentage of fragmentation are reported.  Executes up to 18 times
         faster than the original BITMAP.
0        IUG0519: DP - DISC PATCH
         Category: UTIL        Language: CAL Macro/32             R-03 11/10/87
         DISC PATCH (DP) is a completely new replacement for DISCUPD, with much
         enhanced utility.  Its commands have been modeled after Edit/32 and
         Copy/32 to quickly allow the user to become familiar with its use.  DP
         commands include Chain, which outputs the primary directory to the
         list device.  Directory, which will decode a requested directory
         entry.  Display, which displayes a user specified range of sectors.
-                              INTERCHANGE PROGRAM LIBRARY                 2-25
1
0        Find, which searches the directory for a user specified fd.  Info,
         which displayes basic information about the volume.  Get and Modify,
         which allow the user to edit sectors.  Many additional commands are
         provided, including on line Help.
0        Along with this power comes risks.  DP will allow you to edit sectors
         directly, thus you can destroy the disc's structure, or ideally
         restore a corrupted disc.
0        IUG0520: LIST - AN INTERACTIVE & BATCH FILE LISTER
         Category: UTIL        Language: CAL Macro/32             R-00 01/01/84
         A convenient program to produce formatted listings of files.  The
         program obtains the attributes of the output device and produces
         listings of the correct page length, with headings.  If the output
         device is interactive, one page at a time is produced in response to
         a prompt.
0        IUG0521: LISTMLB - MACRO LIBRARY FORMATTING LISTER
         Category: UTIL        Language: CAL Macro/32             R-03 08/19/86
         Reads a macro library established by MLU32 and produces a listing of
         macro names in alphabetical order followed by the macros themselves
         also in alphabetical order, one per page.
0        IUG0523: SOFTWARE TOOLS
         Category: UTIL        Language: FORTRAN & RATFOR         R-03 01/28/90
         The SOFTWARE TOOLS package as generated by the Software Tools Users
         Group is an extensive collection of portable software which had its
         roots in the book SOFTWARE TOOLS by Kernighan and Plauger.  This
         collection is so extensive that it would be impossible to provide a
         detailed description here.  A few examples of the tools are:
         RATFOR..a preprocessor which translates RATFOR into FORTRAN, AR..an
         archive file maintainer, CH..change text patterns, COMM..print lines
         common to two files, CMPRESS..compress input files, CRYPT..encrypt and
         decrypt standard input, DC..desk calculator, DIFF..isolate differences
         between files, EXPAND..uncompress input files, FIELD..manipulate
         fields of data, FORMAT..format text, LAM..laminate files,
         LEX..generate a lexical analyzer, LISP..a reasonably well-endowed LISP
         interpreter, MACRO..general purpose macro processor, MCOL..multicolumn
         formatting, ROFF..a text formatter, SPELL..locate spelling errors,
         TSORT..topologically sort symbols, XREF..make a cross reference of
         symbols, YACC..generate a compiler from a yacc compiler specification.
         A spelling dictionary of 42,000 words is included for use by the SPELL
         utility.  At 1600 BPI this package alone requires 1200 feet of tape.
0        IUG0524: TAPE INVENTORY PROGRAM
         Category: UTIL        Language: FORTRAN                  R-02 05/17/88
         A program for maintaining an index to a library of tapes.
0        IUG0525: SELECTOR AND COMPARE
         Category: UTIL        Language: FORTRAN                  R-00 09/29/83
         SELECTOR copies records from an input file or device to an output file
         or device with the option of selecting particular fields and records.
         It can unblock tapes and convert from EBCDIC to ASCII in the process.
         Blanks or other text can be inserted into the output.  COMPARE
         compares selected fields from two files.  All records that do not
         match are listed as they exist on both files with the differences
         highlighted.  Up to 20 fields may be selected to form the compare key.
-
0        2-26                  INTERCHANGE PROGRAM LIBRARY
1
0        IUG0530: SETTERM - SET BIOC TERMINAL PARAMETERS
         Category: UTIL        Language: CAL Macro/32             R-03 08/07/91
         A program which permits each user to set terminal parameters
         dynamically when using the BIOC driver.  Includes on line help
         facilities.
0        IUG0531: SPICE2 - A PROGRAM TO SIMULATE SEMICONDUCTOR CIRCUITS
         Category: SCIE        Language: CAL Macro/32 & FORTRAN   R-00 11/14/83
         SPICE is a general-purpose circuit simulation program for nonlinear
         dc, nonlinear transient, and linear ac analyses.  Circuits may contain
         resistors, capacitors, inductors, mutual inductors, independent
         voltage and current sources, four types of dependent sources,
         transmission lines, and the four most common semiconductor devices:
         diodes, BJT's, JFET's, and MOSFET's.  SPICE has built-in models for
         the semiconductor devices, and the user need specify only the
         pertinent model parameter values.  A 75 page manual is provided on
         tape.
0        IUG0532: UNIQEXT - ENUMERATE UNIQUE FILENAME EXTENSIONS
         Category: UTIL        Language: FORTRAN                  R-00 01/20/84
         A program which reads the disc directory and produces a listing of
         filename extensions and the number of occurences of each.
0        IUG0533: COMPRS/EXPAND - IMPROVED FILE COMPRESSION UTILITY
         Category: UTIL        Language: FORTRAN                  R-01 05/11/84
         Improved file compression and expansion utility compresses text files
         such as program source, listings.  Optionally will encrypt using a
         user provided key, but please don't forget the key!
0                  HELP OUR LIBRARY GROW.  CONTRIBUTE SOMETHING TODAY!
-                                         =====
                                          E N D
                                          =====
-
-
-
-
-
-
-
-
-                              INTERCHANGE PROGRAM LIBRARY                 2-27
1
0                                    This page blank
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
         2-28                  INTERCHANGE PROGRAM LIBRARY
1
0                        ======================================
                         INTERCHANGE LIBRARY PROGRAM ORDER FORM
                         ======================================
-        NAME_________________________________________PHONE____________________
         Note:  You must sign agreement below to receive software!
0        ADDRESS_______________________________________________________________
0        _______________________________________________________________
0        _______________________________________________________________
0        _______________________________________________________________
0                  DENSITY REQUESTED:  6250____________1600__________
                               BACKUP FORMAT WILL BE USED
                         (default is 1600, but 6250 is prefered)
0               LIST OF IUG NUMBERS (digits only) REQUESTED (20 MAXIMUM):
-             _________ , _________ , _________ , _________ , _________ ,*
0             _________ , _________ , _________ , _________ , _________ ,*
0             _________ , _________ , _________ , _________ , _________ ,*
0             _________ , _________ , _________ , _________ , _________
-        Order  must be accompanied by payment of $50.00.  The complete library
         is available for $175.00 (at 6250) or $250.00 (at 1600).
0                                       AGREEMENT
0        I  request  that  the  INTERCHANGE  Library  provide  the above listed
         programs, if available.  I understand that such programs are  provided
         without any warranty whatsoever.
0        MEMBERSHIP ID# (from INTERCHANGE Newsletter mailing label)____________
         You must be a member of INTERCHANGE to order programs from the Library
-        SIGNED____________________________________________DATE________________
0        SEND INTERCHANGE MEMBERSHIP APPLICATION TO THE ABOVE ADDRESS__________
0                                      forward to:
                                       INTERCHANGE
                                    1 Technology Way
                                 Westford MA 01886-9918
                              508-392-2651 FAX-508-392-2368
-
-
0                              INTERCHANGE PROGRAM LIBRARY                  A-1
1
0                          ===================================
                           INTERCHANGE LIBRARY SUBMISSION FORM
                           ===================================
0        Please submit both programs & documentation on magnetic tape to reduce
         our photocopy costs.  Backup format at 6250 is preferred.
0        PROGRAM TITLE AND CATALOG DESCRIPTION:
-
-
-
-
         SUBMITTOR____________________________________PHONE____________________
0        ADDRESS:
-
0        PROGRAM CATEGORY:   [ ] OS&L  Operating Systems & Languages
                             [ ] UTIL  Utilities
                             [ ] MATH  Mathematics & Statistics
                             [ ] SCIE  Scientific & Engineering
                             [ ] BUSI  Business
                             [ ] TUTR  Tutorial & CAI
                             [ ] GAME  Games and puzzles
                             [ ] OTHR  Other
0        KEYWORDS & PHRASES:
0        SOURCE LANGUAGE:
0        OTHER SOFTWARE REQUIRED:
0        DESCRIPTION OF SYSTEM USED TO DEVELOP SUBMISSION:
0        MATERIAL SUBMITTED:
-        SEND TO: INTERCHANGE, 1 Technology Way, Westford MA 01886-9918
0        I, the undersigned, give full permission to INTERCHANGE to  reproduce,
         publish,  and  use  this  submission,  and  authorize  others to do so
         without liability.  To the best of my knowledge,  this  submission  is
         free of proprietary information of any kind.
-        SIGNED____________________________________________DATE________________
-
-        A-2                   INTERCHANGE PROGRAM LIBRARY
1
0                          ==================================
                           INTERCHANGE MEMBERSHIP APPLICATION
                           ==================================
         The  name supplied below is that of your organizations primary member.
         Included in a membership is one primary  member  and  three  associate
         members.   The  associate members should be listed on the reverse side
         of this application.
-                   NAME_______________________________________________________
0           ORGANIZATION_______________________________________________________
0                ADDRESS_______________________________________________________
0                       _______________________________________________________
0                   CITY_______________________________________________________
0                  STATE__________________________________Zip__________________
0                COUNTRY__________________________________Postal_______________
0                  PHONE_______________________________________________________
0        BILLING ADDRESS_______________________________________________________
0                       _______________________________________________________
0                       _______________________________________________________
0                               *** SPECIAL INTEREST ***
0        OS/32________________COMMERCIAL______________REAL TIME_____________
0        UNIX_________________DATA COMM_______________MPS___________________
0        GRAPHICS_____________
-        Indicate method of membership dues payment:
0        _____Check/money order enclosed ($125.00)
0        _____Please invoice.  purchase order/voucher must accompany the
              membership application.  Terms - net 30 days.
0                                      forward to:
                                       INTERCHANGE
                                    1 Technology Way
                                 Westford MA 01886-9918
                              508-392-2651 FAX-508-392-2368
         ______________________________________________________________________
                               for Interchange office use
0        Date joined____________________                    MID________________
-
-                              INTERCHANGE PROGRAM LIBRARY                  A-3
1
0                                   =================
                                    ASSOCIATE MEMBERS
                                    =================
0        Included  in  a  membership  is one primary member and three associate
         members.  Associate members receive the newsletter and have  the  same
         privileges as the primary member.
-                   NAME_______________________________________________________
0           ORGANIZATION_______________________________________________________
0                ADDRESS_______________________________________________________
0                       _______________________________________________________
0                   CITY_______________________________________________________
0                  STATE__________________________________Zip__________________
0                COUNTRY__________________________________Postal_______________
-                   NAME_______________________________________________________
0           ORGANIZATION_______________________________________________________
0                ADDRESS_______________________________________________________
0                       _______________________________________________________
0                   CITY_______________________________________________________
0                  STATE__________________________________Zip__________________
0                COUNTRY__________________________________Postal_______________
-                   NAME_______________________________________________________
0           ORGANIZATION_______________________________________________________
0                ADDRESS_______________________________________________________
0                       _______________________________________________________
0                   CITY_______________________________________________________
0                  STATE__________________________________Zip__________________
0                COUNTRY__________________________________Postal_______________
-
-
-
         A-4                   INTERCHANGE PROGRAM LIBRARY
1
