Subject: [os2genau_digest] No. 874
From: Digest <deadmail>
To: "OS/2GenAu Digest"<deadmail>
Date: Thu, 24 Jun 2004 00:01:08 EST-10EDT,10,-1,0,7200,3,-1,0,7200,3600

**************************************************
Wednesday 23 June 2004
 Number  874
**************************************************

Subjects for today
 
1   Following on from the os2 SIG meeting : Robert Traynor  (BobT)" <rtraynor at optusnet dot com dot au>

**= Email   1 ==========================**

Date:  Wed, 23 Jun 2004 11:55:06 +1000
From:  "Robert Traynor  (BobT)" <rtraynor at optusnet dot com dot au>
Subject:   Following on from the os2 SIG meeting

Hi All,

Following on from the Melbourne os2 SIG meeting last night.
Here is the URLs concerning the discussion and succesful demo
install of Audio/Data-CD-Creator and CDRecord/2 for os/2.

-----------------------------------------------------------------
<http://www.os2world dot com/cdwriting/>

Brief Quote:-
The objective of these pages is to provide everything necessary for 
writing CDs with OS/2. Here's also a new home of CDRecord/2, 
Audio/Data-CD-Creator and the other programs written or ported 
by me. The pages are under construction so there may be dead 
links. You may have a look at my homepage on Geocities:-
<http://www.geocities dot com/SiliconValley/Sector/5785/>

Enjoy!

Chris Wohlgemuth
------------------------------------------------------------------

This file has most of the files needed to install Cdrecord etc
and is about 4.3 mb in size (only missing EMX as most should 
have this already):-
<http://members.optusnet dot com dot au/rtraynor/Cdrecrd2.zip>

TIP:-  If you already have the DaniAtapi drivers installed, make sure
they are the latest version and also be aware that you MAY not require 
ANY parameters on the DaniAtapi.FLT line of your config.sys.

TIP 2:  If you use the automatic install for the ASPI drivers. Be aware
that the file ?:\os2\boot\OS2ASPI.DMD may be back leveled.
Make a backup copy first, install Aspi Router and then check and restore
your backup file if needed.  Reboot and then install the Cdrecord package.

Here is the relevant (to CdRecord/2) lines of my config.sys with
all the non relevant bits removed except for a few which should
show their relative position.

DEVICE=D:\OS2\BOOT\OS2CDROM.DMD
rem DEVICE=D:\OS2\BOOT\jjscdrom.dmd   substitute jjscdrom.dmd for OS2CDROM.DMD if you also have RSJ installed

BASEDEV=DANIS506.ADD  Dani IDE driver for hard disks

BASEDEV=OS2DASD.DMD   eCS standard driver not in Warp4
BASEDEV=OS2LVM.DMD     eCS standard driver not in Warp4

BASEDEV=OS2SCSI.DMD   standard scsi support driver
BASEDEV=AICU160.ADD   my scsi card driver.

BASEDEV=DANIATAP.FLT /EJ /v   Dani Atapi driver

BASEDEV=OS2ASPI.DMD /ALL
DEVICE=D:\OS2\BOOT\ASPIROUT.SYS  Aspi driver

Hope this helps,
Regards,
Robert Traynor (BobT).
23 June 2004   11:53

   ,-._|\       Robert Traynor        (BobT)
 /  Oz  \      email            rtraynor at removeme.optusnet dot com dot au
 \_,--.x/ 

----------------------------------------------------------------------------------