The tape drive is having problems reading data. No data has been lost, but there has been a reduction in the capacity of the tape. If continue to receive this message after replacing the tape cartridge, you may need to clean the tape heads or replace the tape drive.
The tape drive is having problems writing data. No data has been lost, but there has been a reduction in the capacity of the tape. If continue to receive this message after replacing the tape cartridge, you may need to clean the tape heads or replace the tape drive.
For more information, contact your dealer, or HP Customer Service Representative. See your User Guide for more details on technical service and support.
The operation has stopped because an error has occurred while reading or writing data which the drive cannot correct. The tape drive may need replacement.
For more information, contact your dealer, or HP Customer Service Representative. See your User Guide for more details on technical service and support.
Your data is at risk:
The tape is damaged or the drive is faulty.
For more information, contact your dealer, or HP Customer Service Representative. See your User Guide for more details on technical service and support.
The tape is from a faulty batch or the tape drive is faulty:
The tape cartridge has reached the end of its useful life:
The tape cartridge is not data-grade. Any data you back up to the tape is at risk.
Replace the cartridge with a data-grade tape.
You are trying to write to a write-protected cartridge.
Remove the write-protection or use another tape.
You cannot eject the cartridge because the tape drive is in use.
Wait until the operation is complete before ejecting the cartridge.
The tape in the drive is a cleaning cartridge.
If you want to back up or restore, insert a data-grade tape.
You have tried to load a cartridge of a type which is not supported by this drive.
The cartridge has been automatically ejected.
The operation has failed because the tape in the drive has snapped:
The operation has failed because the tape in the drive has snapped:
The memory in the tape cartridge has failed, which reduces performance. Do not use the cartridge for further backup operations.
The operation has failed because the tape cartridge was manually ejected while the tape drive was actively writing or reading.
You have loaded a cartridge of a type that is read-only in this drive. The cartridge will appear as write-protected
The directory on the tape cartridge has been corrupted. File search performance will be degraded.
The tape drive needs cleaning:
The tape drive is due for routine cleaning:
The last cleaning cartridge used in the tape drive has worn out:
The last cleaning cartridge used in the tape drive was an invalid type:
Preventive maintenance of the tape drive is required. Check the tape drive users manual for device specific preventive maintenance tasks or call the tape drive supplier helpline.
The tape drive has a hardware fault which is not read/write related:
The tape drive has a hardware fault which is not read/write related:
The tape drive has identified a problem with the SCSI interface:
The operation has failed:
The firmware download has failed because you have tried to use the incorrect firmware for this tape drive.
Obtain the correct firmware and try again.
Environmental conditions inside the tape drive are exceeding the humidity specifications
Environmental conditions inside the tape drive are exceeding the temperature specifications
The voltage supply to the tape drive exceeds specifications
A hardware failure of the tape drive is predicted. Call the tape drive supplier helpline.
The tape drive may have a hardware fault. Run extended diagnostics to verify and diagnose the problem. Check the tape drive users manual for device specific instructions on running extended diagnostic tests.
The changer mechanism is having difficulty communicating with the tape drive:
A tape has been left in the autoloader by a previous hardware fault:
There is a problem with the autoloader mechanism. The loader mechanism has a hardware fault.
The operation has failed because the autoloader door is open:
The autoloader has a hardware fault:
The autoloader cannot operate without the magazine.
A hardware failure of the changer mechanism is predicted. Call the tape drive supplier helpline.
The library mechanism is having difficulty communicating with the drive:
There is a problem with the library mechanism. If problem persists, call the library supplier helpline.
The library has a hardware fault:
Check the library users manual for device specific instructions on resetting the device.
The library has a hardware fault:
The library mechanism may have a hardware fault. Run extended diagnostics to verify and diagnose the problem. Check the library users manual for device specific instructions on running extended diagnostic tests.
The library has a problem with the host interface:
A hardware failure of the library is predicted. Call the library supplier helpline.
Preventative maintenance of the library is required. Check the library users manual for device specific preventative maintenance tasks, or call your library supplier helpline.
General environmental conditions inside the library have exceeded the humidity specifications.
General environmental conditions inside the library have exceeded the temperature specifications.
The voltage supply to the library exceeds specifications. There is a potential problem with the power supply or failure of a redundant power supply
A cartridge has been left in a drive inside the library by a previous hardware fault:
There is a potential problem with a drive ejecting cartridges short or with the library mechanism picking a cartridge from a slot.
There is a potential problem with the library mechanism placing a cartridge into a slot
There is a potential problem with a drive or the library mechanism loading cartridges, or an incompatible cartridge.
The operation has failed because the library door is open:
There is a mechanical problem with the library media import/export mailslot.
The library cannot operate without the magazine.
Library security has been compromised.
The security mode of the library has been changed. The library has either been put into secure mode, or the library has exited the secure mode. This is for information purposes only. No action is required.
The library has been manually turned offline and is unavailable for use.
A drive inside the library has been taken offline. This is for information purposes only. No action is required.
There is a potential problem with the barcode label or the scanner hardware in the library mechanism.
The library has detected a inconsistency in its inventory.
A library operation has been attempted that is invalid at this time.