From: Digest <deadmail>
To: "OS/2GenAu Digest"<deadmail>
Date: Tue, 24 Sep 2002 00:01:04 EST-10EDT,10,-1,0,7200,3,-1,0,7200,3600
Subject: [os2genau_digest] No. 452
Reply-To: <deadmail>
X-List-Unsubscribe: www.os2site.com/list/

**************************************************
Monday 23 September 2002
 Number  452
**************************************************

Subjects for today
 
1  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Voytek Eymont <voytek at sbt dot net dot au>
2  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Ian Manners" <deadmail>
3  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Ian Manners" <deadmail>
4  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Ed Durrant <edurrant at bigpond dot net dot au>
5  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Ed Durrant <edurrant at bigpond dot net dot au>
6  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Ed Durrant <edurrant at bigpond dot net dot au>
7  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Ed Durrant <edurrant at bigpond dot net dot au>
8  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Gavin Miller" <drumextreme at impulse dot net dot au>
9  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Ian Manners" <deadmail>
10  [os2genau] for trekkies : Kev Downes <kdownes at iinet dot net dot au>
11  [os2genau] Australian PC Oct Mag : Ian Manners" <deadmail>
12  Re: [os2genau] Australian PC Oct Mag : Ed Durrant <edurrant at bigpond dot net dot au>
13  Re: [os2genau] Specs on Os/2 Warp 3 Connect ?? : Ed Durrant <edurrant at bigpond dot net dot au>
14  [os2genau] * Reminder * - Melbourne OS/2 SIG Meeting TOMORROW : Ian Manners" <deadmail>
15  [os2genau] * Right Reminder * - Melbourne OS/2 SIG Meeting TOMORROW : Ian Manners" <deadmail>
16  [os2genau] FS: Xircom CM-56G PC-Card v90 modem : Daryl Pilkington" <u3232 at home.dialix dot com>

**= Email   1 ==========================**

Date:  Mon, 23 Sep 2002 00:22:47
From:  Voytek Eymont <voytek at sbt dot net dot au>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

** Reply to note from Ed Durrant <edurrant at bigpond dot net dot au> Sun, 22 Sep 2002 18:50:45 +1000


> Does anyone know where the specs for OS/2 Warp 3  are on the web. I mean 
> things like min/max memory size, harddrive/partition size, processor 
> etc. i have a customer who swares that OS/2 Warp 3 could only ever work 
> with a maximum of 64 MB or RAM. I'm sure this wasn't the case but I need 
> to try to find some documented proof. The Manual that comes with warp 3 
> only defines the Minimum not the maximum requirements.

perhaps it's a hardware issue:
as I recall, the early Pentium m/b only supported max. of 64MB RAM, or. more to
the point, could only address max of 64MB;

so, if the hardware couldn't do it, what does it matter ?

I have an old ThinkPad 160MB HD, with a working copy of Warp3.



Voytek Eymont
SBT Information Systems Pty Ltd
http://www.sbt dot net dot au/links/
phone +61-2 9310-1144 fax +61-2 9310-1118 
----------------------------------------------------------------------------------
 

**= Email   2 ==========================**

Date:  Mon, 23 Sep 2002 01:46:49 +1000 (EST)
From:  "Ian Manners" <deadmail>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

Hi Ed

>Does anyone know where the specs for OS/2 Warp 3  are on the web. I mean
>things like min/max memory size, harddrive/partition size, processor

I've had a look but cant see any info obviously relating to Max RAM,
only minumum hardware specs.

I can tell you that Warp3, FP43 runs with full access to 128MB RAM
on an IBM PS/2 Model 77i with an Intel Pentium OD80.

>etc. i have a customer who swares that OS/2 Warp 3 could only ever work
>with a maximum of 64 MB or RAM. I'm sure this wasn't the case but I need
>to try to find some documented proof. The Manual that comes with warp 3
>only defines the Minimum not the maximum requirements.

As Voytek mentioned, might be his Hardware, has he checked his
BIOS settings if its nonIBM, and made sure MEM for OS/2 is "OFF" ?

If its an early IBM ValuePoint, I can vagely remember something
about a patch for Keyboard and RAM problems, early 486 models
only I think.

Cheers
Ian B Manners


Windows: A View to be Killed.
----------------------------------------------------------------------------------
 

**= Email   3 ==========================**

Date:  Mon, 23 Sep 2002 01:58:48 +1000 (EST)
From:  "Ian Manners" <deadmail>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

http://www.os2site dot com/sw/info/faq/ warpfaq3.zip

============================

(2.6) More Than 16 MB RAM

 Can I use more than 16 MB of RAM?

OS/2 Warp will address all the RAM in your system.  If the BIOS recognizes the
memory, OS/2 Warp will find it and use it.

However, on certain systems the RAM beyond the 16 MB boundary may be used as a
fast swap area.  OS/2 Warp relies on its swap file, SWAPPER.DAT, to hold code
and data which cannot fit into real memory (i.e.  to provide virtual memory).
If the swap file (and applications) can only be accessed via a hard disk
adapter which uses 24-bit DMA for disk access (e.g.  the Adaptec 154x series),
then the system must move code and data below the 16 MB boundary before it can
write it to disk.  This "double move" is costly (in terms of performance), and
often OS/2 Warp will merely use all the RAM above the 16 MB boundary as a fast
swap area (before writing to disk) to avoid the problem.  It is up to the hard
disk adapter driver, however, to decide how to handle this situation.

Only AT bus adapters are limited to 24-bit DMA.  Microchannel, EISA, VESA
LocalBus, and other 32-bit adapters are not so limited.  Moreover, only a
select few AT bus hard disk adapters utilize DMA.  Nearly all MFM, RLL, ESDI,
and IDE adapters, and most SCSI adapters, do not use DMA for disk access.

Suffice it to say that, regardless of your present hardware, OS/2 Warp will
take advantage of it as best it can.  However, if you are planning new
hardware purchases, you may wish to take this particular hardware design
limitation into account.  Specifically, if you plan to install more than 16 MB
of RAM in your system, either choose a 32-bit hard disk adapter (Microchannel
or PCI, for example) or choose an AT bus adapter which does not utilize DMA
for disk access (a standard IDE adapter, an Adaptec 152x series SCSI adapter,
or a Future Domain SCSI adapter, for example).  The performance trade-off is
highly system dependent, however.  You may find that even DMA adapters such as
the Adaptec 154x series outperform the alternatives in certain cases.



Cheers
Ian B Manners


Idiot Filter: "Ya, we run the C++ operating system on a QNX platform over
FDDI twisted pair at 600 MIPS." If they swallow that, hang up.
----------------------------------------------------------------------------------
 

**= Email   4 ==========================**

Date:  Mon, 23 Sep 2002 06:42:19 +1000
From:  Ed Durrant <edurrant at bigpond dot net dot au>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

Thanks Gavin, I have the minimum specs (interestingly though, the handbook that is
packed with OS/2 Warp 3 says 4 MB minimum RAM, you say the box (I don't have the box
any more) says 8MB ? What I need in a documented form is if the OS is installed on a
machine with e.g. 128MB of RAM, that it will be used. I believe the 16bit OS/2 (1.x)
used memory over 64MB in a different way (hence the setting in many BIOSes, even to
this day) and that's where the confusion is coming from. Of course Windows 95 OSR2 (not
Microsoft's interesting naming of the product), only used memory over 64MB as a disk
cache.

Cheers/2

Ed.

Gavin Miller wrote:

> G'day Ed,
>
> I currently have Warp 3 connect running on a PS/2 35sx, which is a 386 with 6Mb Ram
> and a 540Mb HD, with network support.  It's slow, but works.
>
> On the box it says:
> Intel 386sx - compat or higher
> 8mb Min RAM
> 90mb free HD (easy install option)
> 1.44 3.5 FD "A"
> VGA
> Suported LAN adapter
> IBM compat mouse
> Multimedia ready systems for sound
> OS/2 compat CD rom drive
> BonusPak requires upto 30Mb additional free space and 9600 baud or higher modem
>
> Cheers
> G
>
> On Sun, 22 Sep 2002 18:50:45 +1000, Ed Durrant wrote:
>
> >Does anyone know where the specs for OS/2 Warp 3  are on the web. I mean
> >things like min/max memory size, harddrive/partition size, processor
> >etc. i have a customer who swares that OS/2 Warp 3 could only ever work
> >with a maximum of 64 MB or RAM. I'm sure this wasn't the case but I need
> >to try to find some documented proof. The Manual that comes with warp 3
> >only defines the Minimum not the maximum requirements.
> >
> >Cheers/2
> >
> >Ed.
> >

> > 

> >
>

>  


----------------------------------------------------------------------------------
 

**= Email   5 ==========================**

Date:  Mon, 23 Sep 2002 06:43:57 +1000
From:  Ed Durrant <edurrant at bigpond dot net dot au>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

The hardware in use are IBM Netfinity 3000 servers, so the hardware can definately address
more that 64MB. I take your point though.

Cheers/2

Ed.

Voytek Eymont wrote:

> ** Reply to note from Ed Durrant <edurrant at bigpond dot net dot au> Sun, 22 Sep 2002 18:50:45 +1000
>
> > Does anyone know where the specs for OS/2 Warp 3  are on the web. I mean
> > things like min/max memory size, harddrive/partition size, processor
> > etc. i have a customer who swares that OS/2 Warp 3 could only ever work
> > with a maximum of 64 MB or RAM. I'm sure this wasn't the case but I need
> > to try to find some documented proof. The Manual that comes with warp 3
> > only defines the Minimum not the maximum requirements.
>
> perhaps it's a hardware issue:
> as I recall, the early Pentium m/b only supported max. of 64MB RAM, or. more to
> the point, could only address max of 64MB;
>
> so, if the hardware couldn't do it, what does it matter ?
>
> I have an old ThinkPad 160MB HD, with a working copy of Warp3.
>
> Voytek Eymont
> SBT Information Systems Pty Ltd
> http://www.sbt dot net dot au/links/
> phone +61-2 9310-1144 fax +61-2 9310-1118

>  


----------------------------------------------------------------------------------
 

**= Email   6 ==========================**

Date:  Mon, 23 Sep 2002 06:47:12 +1000
From:  Ed Durrant <edurrant at bigpond dot net dot au>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

I believe the hardware is configured correctly, as I mentioned in my reply to Voytek,
these are Netfinity 3000's.

I don't believe there is a problem, it purely a conception that this customer has that
warp 3 can't address over 64MB. I simply can't find any written doco, defining what it
can address and use. I'd expect it to be at least 2 GB but as I said, I just can't
find anything that I can point this customer to as a reference !

Cheers/2

Ed.

Ian Manners wrote:

> Hi Ed
>
> >Does anyone know where the specs for OS/2 Warp 3  are on the web. I mean
> >things like min/max memory size, harddrive/partition size, processor
>
> I've had a look but cant see any info obviously relating to Max RAM,
> only minumum hardware specs.
>
> I can tell you that Warp3, FP43 runs with full access to 128MB RAM
> on an IBM PS/2 Model 77i with an Intel Pentium OD80.
>
> >etc. i have a customer who swares that OS/2 Warp 3 could only ever work
> >with a maximum of 64 MB or RAM. I'm sure this wasn't the case but I need
> >to try to find some documented proof. The Manual that comes with warp 3
> >only defines the Minimum not the maximum requirements.
>
> As Voytek mentioned, might be his Hardware, has he checked his
> BIOS settings if its nonIBM, and made sure MEM for OS/2 is "OFF" ?
>
> If its an early IBM ValuePoint, I can vagely remember something
> about a patch for Keyboard and RAM problems, early 486 models
> only I think.
>
> Cheers
> Ian B Manners
>
> Windows: A View to be Killed.

>  


----------------------------------------------------------------------------------
 

**= Email   7 ==========================**

Date:  Mon, 23 Sep 2002 06:53:14 +1000
From:  Ed Durrant <edurrant at bigpond dot net dot au>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

Thanks Ian, I've downloaded that document.

By the way, your OS/2 Strategy document is the old (2001), you might wish to replace
it with the 2002 one ?
its at
http://www-3.ibm dot com/software/os/warp/strategy/

Cheers/2

Ed.

Ian Manners wrote:

> http://www.os2site dot com/sw/info/faq/ warpfaq3.zip
>
> ============================
>
> (2.6) More Than 16 MB RAM
>
>  Can I use more than 16 MB of RAM?
>
> OS/2 Warp will address all the RAM in your system.  If the BIOS recognizes the
> memory, OS/2 Warp will find it and use it.
>
> However, on certain systems the RAM beyond the 16 MB boundary may be used as a
> fast swap area.  OS/2 Warp relies on its swap file, SWAPPER.DAT, to hold code
> and data which cannot fit into real memory (i.e.  to provide virtual memory).
> If the swap file (and applications) can only be accessed via a hard disk
> adapter which uses 24-bit DMA for disk access (e.g.  the Adaptec 154x series),
> then the system must move code and data below the 16 MB boundary before it can
> write it to disk.  This "double move" is costly (in terms of performance), and
> often OS/2 Warp will merely use all the RAM above the 16 MB boundary as a fast
> swap area (before writing to disk) to avoid the problem.  It is up to the hard
> disk adapter driver, however, to decide how to handle this situation.
>
> Only AT bus adapters are limited to 24-bit DMA.  Microchannel, EISA, VESA
> LocalBus, and other 32-bit adapters are not so limited.  Moreover, only a
> select few AT bus hard disk adapters utilize DMA.  Nearly all MFM, RLL, ESDI,
> and IDE adapters, and most SCSI adapters, do not use DMA for disk access.
>
> Suffice it to say that, regardless of your present hardware, OS/2 Warp will
> take advantage of it as best it can.  However, if you are planning new
> hardware purchases, you may wish to take this particular hardware design
> limitation into account.  Specifically, if you plan to install more than 16 MB
> of RAM in your system, either choose a 32-bit hard disk adapter (Microchannel
> or PCI, for example) or choose an AT bus adapter which does not utilize DMA
> for disk access (a standard IDE adapter, an Adaptec 152x series SCSI adapter,
> or a Future Domain SCSI adapter, for example).  The performance trade-off is
> highly system dependent, however.  You may find that even DMA adapters such as
> the Adaptec 154x series outperform the alternatives in certain cases.
>
> Cheers
> Ian B Manners
>
> Idiot Filter: "Ya, we run the C++ operating system on a QNX platform over
> FDDI twisted pair at 600 MIPS." If they swallow that, hang up.

>  


----------------------------------------------------------------------------------
 

**= Email   8 ==========================**

Date:  Mon, 23 Sep 2002 11:57:14 +1100 (EDT)
From:  "Gavin Miller" <drumextreme at impulse dot net dot au>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

Hi Ed,
Sorry I misinterpreted the question.

It was my understanding that all versions of Warp could handle over 64Mb ram.  It was 
only the pre-warp versions of OS/2 that had the different addressing method, and hence 
the bios option for os/2 memory addressing.  I've heard alot of windows users talk 
about this and all of them have had the same preconception that your customer has.  
They see the option about OS/2 and memory and automatically apply a theory for all 
versions of os/2 without ever using or investigating.

I could install Warp3 connect on my machine here.  It has 128mb

Oh and about the min specs on the box.  Warp 3 was indeed 4mb min, Warp 3 connect 
is 8mb min.  I had copies of both.  Warp 3 came preinstalled on my PC350.  Warp 3 
connect I bought later, but the documentation came from Warp 3 and does mention the 
4mb min spec even though the box says 8.

----------------------------------------------------------------------------------
 

**= Email   9 ==========================**

Date:  Mon, 23 Sep 2002 12:17:47 +1000 (EST)
From:  "Ian Manners" <deadmail>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

Hi Ed

>By the way, your OS/2 Strategy document is the old (2001), you might wish to replace
>it with the 2002 one ?
>its at http://www-3.ibm dot com/software/os/warp/strategy/

Thanks, added it :-)

ok, I have unrared my OS/2 Warp v3 FP40 image from CD onto a spare
SCSI drive, altered the config.sys and added Adaptec SCSI drivers from
earlier this year, reset the video to VGA, unplugged the other SCSI HD's
in my Netfinity 3000 here, and booted OS/2 Warp3, it access's and reports
768MB of ram :-)


Cheers
Ian B Manners


C Code.  C Code Run.  Run, Code, RUN! PLEASE!!!!
----------------------------------------------------------------------------------
 

**= Email   10 ==========================**

Date:  Mon, 23 Sep 2002 11:10:26 +0900
From:  Kev Downes <kdownes at iinet dot net dot au>
Subject:  [os2genau] for trekkies

-------------------------------------------------------------------------
The following message is forwarded to you by Kev Downes
<kdownes at iinet dot net dot au>
-------------------------------------------------------------------------

Star Trek & Microsoft "Star Trek Lost Episodes"
         transcript

"Mr. LaForge, have you had any
         success with your attempts at finding a weakness in the
         Borg? And Mr. Data, have you been able to access their
         command pathways?"   "Yes, Captain. In fact, we
         found the answer by searching through our archives on
         late Twentieth-century computing technology."

          "What the hell is `Microsoft'?"

          "Allow me to explain. We will
         send this program, for some reason called `Windows',
         through the Borg command pathways. Once inside their
         root command unit, it will begin consuming system
         resources at an unstoppable rate."

          "But the Borg have the ability to adapt. Won't
         they alter their processing systems to increase their
         storage capacity?"

          "Yes, Captain. But when `Windows' detects this,
         it creates a new version of itself known as an
         `upgrade'. The use of resources increases exponentially
         with each iteration. The Borg will not be able to adapt
         quickly enough. Eventually all of their processing
         ability will be taken over and none will be available
         for their normal operational functions."

          "Excellent work. This is even better than that
         `unsolvable geometric shape' idea."

         . . . 15 Minutes Later . . .

          "Captain, we have successfully installed the
         `Windows' in the Borg's command unit. As expected, it
         immediately consumed 85% of all available resources.
         However, we have not received any confirmation of the
         expected `upgrade'."

          "Our scanners have picked up an increase in
         Borg storage and CPU capacity, but we still have no
         indication of an `upgrade' to compensate for their
         increase."

          "Data, scan the history banks again and
         determine if there is something we have missed."

          "Sir, I believe there is a reason for the failure
         in the `upgrade'. Apparently the Borg have circumvented
         that part of the plan by not sending in their
         registration cards."

          "Captain, we have no choice. Requesting
         permission to begin emergency escape sequence 3F ...."

          "Wait, Captain! Their CPU capacity has
         suddenly dropped to 0% !"

          "Data, what does your scanners show?"

          "Apparently the Borg have
         found the internal `Windows' module named `Solitaire',
         and it has used up all available CPU capacity."

          "Let's wait and see how long this `Solitaire'
         can reduce their functionality."

         . . . Two Hours Pass . . .

          "Geordi, what is the status of the Borg?"

          "As expected, the Borg are attempting to
         re-engineer to compensate for increased CPU and storage
         demands, but each time they successfully increase
         resources I have setup our closest deep space monitor
         beacon to transmit more `Windows' modules from something
         called the `Microsoft Fun-pack'.

          "How much time will that buy us?"

          "Current Borg solution rates allow me to
         predicate an interest time span of 6 more hours."

          "Captain, another vessel has entered our
         sector."

          "Identify."

          "It appears to have markings very similar to the
         'Microsoft' logo..."

          "THIS IS ADMIRAL BILL GATES OF THE
         MICROSOFT FLAGSHIP _MONOPOLY_. WE HAVE POSITIVE
         CONFIRMATION OF UNREGISTERED SOFTWARE IN THIS SECTOR.
         SURRENDER ALL ASSETS AND WE CAN AVOID ANY TROUBLE. YOU
         HAVE 10 SECONDS TO COMPLY."

          "The alien ship has just opened its forward
         hatches and released thousands of humanoid-shaped
         objects."

          "Magnify forward viewer on the alien craft!"

          "My God, captain! Those are human beings
         floating straight toward the Borg ship - with no life
         support suits! How can they survive the tortures of deep
         space?!"

          "I don't believe that those are humans, sir. If
         you will look closer I believe you will see that they
         are carrying something recognized by twenty-first
         century man as doeskin leather briefcases, and wearing
         Armani suits."

          "Lawyers!!"

          "It can't be. All the Lawyers were rounded up
         and sent hurtling into the sun in 2017 during the Great
         Awakening."

          "True, but apparently some must have survived."

          "They have surrounded the Borg ship and are
         covering it with all types of papers."

          "I believe that is known in ancient vernacular as
         `red tape'. It often proves fatal."

          "They're tearing the Borg to pieces!"

          "Turn the monitors off, Data, I cant bear to
         watch. Even the Borg doesn't deserve such a gruesome
         death!"




-----------------------------------------------------
 -- End of forwarded message
-----------------------------------------------------
=========================
Kev Downes <kdownes at iinet dot net dot au>
Windows is not the answer. Windows is the question. The answer is NO!  
We use and recommend IBM OS/2 Warp and Serenity System's eComStation.
=========================
"Jesus Christ is the centre of everything and the object of everything;
and he who does not know him, knows nothing of the order of the world and
nothing of himself."             Blaise Pascal
=========================

----------------------------------------------------------------------------------
 

**= Email   11 ==========================**

Date:  Mon, 23 Sep 2002 14:56:16 +1000 (EST)
From:  "Ian Manners" <deadmail>
Subject:  [os2genau] Australian PC Oct Mag

Hi all

I ventured out and purchased the latest APC to see if anything
had changed, also as I've run out of reading material for the
thrown. Yea on page 26 is an article by Daryl Pilkington, entitled
"Acronym Anerism" tis nice to know feelings on this subject are
shared, as they should, as it is only logical.

Cheers
Ian B Manners


Ballmer's Law: Anything that can go wrong, will be included FREE.
----------------------------------------------------------------------------------
 

**= Email   12 ==========================**

Date:  Mon, 23 Sep 2002 18:21:59 +1000
From:  Ed Durrant <edurrant at bigpond dot net dot au>
Subject:  Re: [os2genau] Australian PC Oct Mag

hey, I've had the mag since saturday and didn't see the letter from Daryl.  I'd amend
one point however it should say 600W or even Kw, MW etc. not 600mW !!

Actually it looks like APC might even be squeezing themselves slowly out from under
Microsoft's thumb. The cover story and picture certainly doesn't portray Windows as
the wonderful OS that they used to say it was (it's a BSOD picture with reference to
how long you will waste getting it going again). Also there's been references in the
mag as to how to get your money back from Microsoft when buy a new PC that has the
Windows infection on the drive for the last few months and this month's review of
Lycoris (aka Redmond Linux) and it's inclusion on the cover CD is definately not what
Microsoft would like to see.

Cheers/2

Ed.

Ian Manners wrote:

> Hi all
>
> I ventured out and purchased the latest APC to see if anything
> had changed, also as I've run out of reading material for the
> thrown. Yea on page 26 is an article by Daryl Pilkington, entitled
> "Acronym Anerism" tis nice to know feelings on this subject are
> shared, as they should, as it is only logical.
>
> Cheers
> Ian B Manners
>
> Ballmer's Law: Anything that can go wrong, will be included FREE.

>  


----------------------------------------------------------------------------------
 

**= Email   13 ==========================**

Date:  Mon, 23 Sep 2002 18:28:11 +1000
From:  Ed Durrant <edurrant at bigpond dot net dot au>
Subject:  Re: [os2genau] Specs on Os/2 Warp 3 Connect ??

Ian,

  thanks for the practical proof of the document. The customer had actually REMOVED RAM
when they got the 128MB Netfinity 3000's because they thought it wouldn't work !

Double Doh !

Ed.

Ian Manners wrote:

> Hi Ed
>
> >By the way, your OS/2 Strategy document is the old (2001), you might wish to replace
> >it with the 2002 one ?
> >its at http://www-3.ibm dot com/software/os/warp/strategy/
>
> Thanks, added it :-)
>
> ok, I have unrared my OS/2 Warp v3 FP40 image from CD onto a spare
> SCSI drive, altered the config.sys and added Adaptec SCSI drivers from
> earlier this year, reset the video to VGA, unplugged the other SCSI HD's
> in my Netfinity 3000 here, and booted OS/2 Warp3, it access's and reports
> 768MB of ram :-)
>
> Cheers
> Ian B Manners
>
> C Code.  C Code Run.  Run, Code, RUN! PLEASE!!!!

>  


----------------------------------------------------------------------------------
 

**= Email   14 ==========================**

Date:  Mon, 23 Sep 2002 21:54:22 +1000 (EST)
From:  "Ian Manners" <deadmail>
Subject:  [os2genau] * Reminder * - Melbourne OS/2 SIG Meeting TOMORROW

We would like to remind you of this upcoming event.

Melbourne OS/2 SIG Meeting 

Date:   Tuesday, 27th August 2002
Time:  6:30PM - 9:30PM
Place:  Melbourne PC Group
           Victoria, Australia.

The Monthly Meeting of Melbourne OS/2 SIG 
Normally held the fourth Tuesday of each month.

My fault (Ian) this message didnt go out, I've been messin
with a new mail server :-(

Cheers
Ian B Manners


Eradicate IE Bugs!
Find and fix those pesky bugs with these alerts and
solutions in the Help Channel:- Get Netscape Navigator 4.5.
----------------------------------------------------------------------------------
 

**= Email   15 ==========================**

Date:  Mon, 23 Sep 2002 21:56:24 +1000 (EST)
From:  "Ian Manners" <deadmail>
Subject:  [os2genau] * Right Reminder * - Melbourne OS/2 SIG Meeting TOMORROW

AAAAARRRRRRghhh
Make that =>>

Melbourne OS/2 SIG Meeting 

Date:   Tuesday, 24th September 2002
Time:  6:30PM - 9:30PM
Place:  Melbourne PC Group
           Victoria, Australia.

Cheers
Ian B Manners


He's dead Jim....you get his tricoder, I'll grab his wallet!
----------------------------------------------------------------------------------
 

**= Email   16 ==========================**

Date:  Mon, 23 Sep 2002 23:22:02 +1000 (EST)
From:  "Daryl Pilkington" <u3232 at home.dialix dot com>
Subject:  [os2genau] FS: Xircom CM-56G PC-Card v90 modem

Hi,
I've mistakenly purchased a Xircom CM-56G PC-Card v90 modem, thinking
it was a 10/100 LAN adapter as well.

This is a proper hardware modem, OS/2 friendly.

If anyone is interested in purchasing this for $130 + delivery, please
reply off-list.

Regards,

Daryl  Pilkington 

//// The PC-Therapist, Business Computing Integration
O<O  AUSTRALIA
\_/
<O>  OS/2 Warp, Redhat Linux, DB2
     IBM Certified Systems Expert

        email: darylp at pc-therapist dot com dot au
          Mob: 0425-251-300

----------------------------------------------------------------------------------
 

