Return-Path: <deadmail>
Received: from asio.cia dot com (asio.cia dot com [209.197.145.101]) by 
 mail. (Weasel v1.20) for <deadmail>; 
 09 June 2001 01:00:00 
From: "Digest" <deadmail>
To: "OS/2GenAu Digest" <deadmail>
Date: Sat, 9 Jun 2001 01:00:00 +1000 (EDT)
Reply-To: "OS2GenAu" <deadmail>
Priority: Normal
X-Mailer: CASMailer 1.0 for OS/2 Warp PPC 1.05/G4
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Subject:   No. 83
Message-ID: <200106090100.000029G6atmail.>

Date:- 9 June 2001

1================================================

From: "Gavin Miller" <paxtonatiaa dot com dot au>
Date: Fri, 08 Jun 2001 17:09:04 -0400 (EDT)
Subject: Re: [os2genau] Epston Stylus Installation

Hi Alan,

As your problem has spread to Windo$e, it might have something to do with the actual cartridge.  I've had 
one fail on me before, and all the printer did was beep when a print job was sent.  See what happens with the 
replacement printer. :-)

Cheers,
Gavin

On Thu, 7 Jun 2001 23:18:24 +1000, Alan Duval wrote:

>I spoke too soon.
>This morning I tried printing from my various programs and was able to do
>so from all except Lotus Smartsuite 123. when I tried to print a range of
>cells it would only print the cell borders and the background colours but
>not the figures in the cells. I tried many times and in the end decided to
>remove the background colours and try to print. Well at this point the
>printer head moved a few times and then stopped and the green light started
>flashing and the second light went red. Nothing I did helped so I had to
>turn off the printer. I tried again with the same result. Rebooted and
>tried again several times with the same result.
>I then went back to windows to check that the printer was still able to
>print and to my horror found the same thing happened. Tried to print from a
>command line but no result. Also the maintenance utility wouldn't function.
>Then rang Epson and they told me to try various things but no result so
>they are giving me  another  printer.
>I'll pick it up on Saturday. Hope this works better.
>
>> 
>> I'm starting to suspect a corrupted os2sys.ini file. Do you know
>> how to use iniedit or inimaint ? I'd be tempted to de-install all
>> printers, go through the INI file and remove anything that refers
>> to either your old Deskjet or this Epson, reboot and then
>> re-install the drivers.
>
>You may have a point here as although I delete printer objects and their
>drivers if I reinstall the driver it says that the files already exist???
>Also Warpguide is never able to fully install the driver and says that
>install has failed as it has been unable to create a printer object.???
>why.
>
>I've got iniedit but don't know how to use it. Also got Unimaint but
>haven't explored it's use with ini files.
>How would I know whether the files referred to my old deskjet or this
>Epson?  I guess if they had HP or EP at the start they would be candidates
>but they may not have such obvious letters.
>
>Regards
>
>Alan

2=============================================

Date: Fri, 08 Jun 2001 23:28:57 +1000
From: Daryl Pilkington <u3232athome.dialix dot com>
Subject: [os2genau] SOLVED: [OT] Internet Dial-Up

Thanks for all the input folks,

The internal hardware modem in question was a:
Askey Diamond Voice 56i
V1456VQH-R AST

CONCLUSION:
Solution was not strictly a Windoze problem.
It did demonstrate though, that a good understanding of how modems work
in practice was required to solve this problem.
It also demonstrated how the automation in Windoze is a major handicap
in problem determination for skilled professionals.

FINDINGS:
I installed the internal modem on my known-to-work OS/2 box, which does
nothing "automatically".

1)
Whilst I thought the modem was configured for com2, (2f8, IRQ3).
I found it was configured for (2f8, IRQ4).

Misconfigured, the modem simply didn't respond under OS/2.

Under Windoze AT commands worked OK & the modem even dialed out!
(Doesn't say much for the i/o routines of Windoze).

In both cases hardware flow control had been selected.

Once configured correctly, it worked just fine with 56Kflex protocol on
my OS/2 box.

2)
It was a Rockwell chipset 56Kflex modem & required a firmware upgrade to
v90.
Once this was achieved, it also worked fine under OS/2.

3)
Reinstalled in Windoze box.
I only had the original 56Kflex modem.inf file. which I used.

FYI a Windoze modem.inf file defines what AT init strings are required
for modem:
compression
error correction
Maximum DTE speed
This file is useful for finding out these strings for configuration of
modems in non-Windoze environments.

This time it passed the userid & password, but then it died.
This was a new situation, so I figured I'd install the new v90 modem.inf
file.

4)
With the v90 modem.inf file it didn't even pass the userid & password.
I've seen this problem before & is usually due to modem protocol
misconfiguration rather than a PPP issue.

5)
Based in this hunch, I installed a "standard modem" inf file.
It then worked!!!

This indicates the manufacture-supplied v90 modem.inf file was
defective.

-- 
Regards, 

Daryl  Pilkington 

//// The PC-Therapist, Business Computing Integration
O<O  AUSTRALIA
\_/
<O>  OS/2 Warp, Redhat Linux, DB2
     IBM Certified Systems Expert

        email: darylpatpc-therapist dot com dot au
          ICQ: 91914134
          Tel: +61-2-8902-1300
          Mob: +61-425-251-300
          Fax: +61-2-9411-3720
      Mob SMS: 0425251300.0000atorangenet dot com dot au
               (120 characters max, send no carriage returns)

END=============================================
