SW1 is the 4-switch pack near the fingers
SW2 is the ten-switch pack
SW3 is the remaining 4-switch-pack near the handles

Setting the CSR: (only one on at a time)

		LSI-11		Microvax II
SW2-10 on	17772150	20001468
SW2-9 on	17760334	200000DC
SW2-8 on	17760354	200000EC
SW2-7 on	17760374	200000FC
SW2-6 on	17760414	2000010C
SW2-5 on	17760434	2000011C

Bootstrap select (only one on at a time):

SW2-3 on 	On board bootstrap disabled
SW2-2 on	On board bootstrap enabled at 17773000
SW2-1 on	On board bootstrap enabled at 17771000

Drive configuration:

SW3-2	SW3-3	SW3-4	Function
On	On	On	All drives fixed media
On	Off	On	Drive 0 removable
On 	On	Off	Drives 0 and 1 removable
On	Off	Off	Drives 0, 1, and 2 removable
Off	On	On	Drives 0,1,2, and 3 removable
Off	Off	Off	Enable WOMBAT via on-board port

SW3-1 is unused and should be left on

Interrupt Priority:

SW1-2	SW1-3	SW1-4	Priority
On	On	On	4
On	On 	Off	5
On	Off	On	6
Off	Off	On	7

SW1-1 is unused

Maintenenace Terminal Adapter, 10-pin port: 9600 baud, 8 data bits, 1 stop bit

J6	DB25S	Function
7	7	RS232 Enable
8	2	RS232 Input
3	3	RS232 Output
4	7	Ground

Starting WOMBAT over the console on a LSI-11:

Halt the processor.
0/0
0g
'CSR'/250
R7/2000
RS/340
P

Microvax II:
Halt the processor
U
I
D/P/W 20001F40	20
D/L 20088008 80000002
D/W 2000xxxx AC  ("xxxx" is the last 4 digits from Microvax CSR table)
S 400
