VAX-11/730

[Tony Duell]

> 
> >Boy, that was a short month... I happened to be next to one of my
> >caches of DEC prints and lo and behold, the very 11/730-ZA print stack
> >I was after.  It is about 2 cm thick, and contains mechanical drawings
> >of the cable tray, prints for the PSU, TU58, CPU, and memory,
> >schematics and PAL equations included.
> >
> >It being B-sized drawings, I have no easy way to scan these... my
> >hardware tops out at 8.5"x14".  Suggestions?
> 
> Is this any different to the one I scanned and is
> available via Manx. If not, I'd suggest that for penance you
> find something that isn't already on there and scan that :-)

I didn't think the one om Manx (that you pointed me to the other day) 
contained the PAL equations. I may have missed them, of course. If they 
aren't there, and the one mentioned here does contain them, then it's 
certainly work scanning...

However, the PALs in an 11/730 are not protected (the security fuse is 
intact), and when I had access to a good PAL programmer, I actually 
desoldered all the PALs in my 11/730 and read them out. So the PAL 
equations would be trivial to reconstruct given the schematics, which are 
on Manx.

-tony