PDP-11/10 Boards?

[Gooijen H]

Check www.pdp-11.nl  and click on the link 11/10 at the left.
There is also a boards position lay-out for the *4* different
backplanes ... Let me know if you miss something; new info is
aways a stimulus to update the pages; as hearing they are read.

- Henk, PA8PDP


> -----Original Message-----
> From: cctalk-bounces at classiccmp.org
> [mailto:cctalk-bounces at classiccmp.org]On Behalf Of John Allain
> Sent: donderdag 28 oktober 2004 2:16
> To: General Discussion: On-Topic and Off-Topic Posts
> Subject: Re: PDP-11/10 Boards?
> 
> 
> > Does anyone here happen to know what boards a PDP-11/10 
> should have in it?
> > I don't happen to have that vintage of handbooks handy at 
> the moment.
> 
> Here's my inventory notes on the machine...
> 
> CPU:
>    M7260 KD11-B        11/05 data paths module
>    M7261 KD11-B        11/05 control logic module
> memory:
>    H214   8-Kword 16-bit H213 (used in MM11-L)(replaced by H215)
>    G110   16 bit 11/05, 11/25, 11/45 Control & Data Loops, HEXx8.5
>    G231   16K XY Selection, Current source, Address Latch, 8K Decode.
>    G231   16K XY Selection, Current source, Address Latch, 8K Decode.
>    G110   16 bit 11/05, 11/25, 11/45 Control & Data Loops, HEXx8.5
>    H214   8-Kword 16-bit H213 (used in MM11-L) (replaced by H215)
> options:
>    DF11           (tbs)(in slot 1) (control panel?)
>    M7254 RK11-D        RK05 status control module
>    M7255 RK11-D        RK05 disk control module
>    M7256 RK11-D        RK05 registers module (data path)
>    M7257 RK11-D        RK05 bus control module
> 
> Hope this helps,
> John A.
> 
>