Using keyboards with Palm or other Handheld "Personal Digital Assistants"

 //////////////////////////////////////////////////////////////////////////////

To salute our "video terminal" motif:

one idea that might occur to Palm owners is to try hooking up both a GoType
keyboard and a modem to their Palm device, so as to create a pocket-portable
VT100 terminal emulator.  Alas, with the standard Palm hardware products
available in the spring of A.D. 2000, there is only a single serial port,
which the keyboard and modem cannot share.

However, you could obtain a PalmOS-compatible TRGpro handheld computer and use
a modem in the Compact Flash (CF) slot, following a hint from another web site:

        http://www.landware.com/gotype/faq.html

        40. But you don't understand, I really really want to go online with my
        GoType! Pro and modem.  Is there anything I can do?  I'm desperate and
        will do anything!

        TRG sells a PalmOS compatible organizer which sports a CompactFlash
        slot.  Since the CompactFlash slot is separate from the serial
        port which connects to the GoType! keyboard, you will be able to use
        both at the same time.  Check out the TRG website at


         [was: http://www.trgpro.com/  ]

         now:  http://www.handera.com/

        for additional information, or call +1 515/252-7522.


And then obtain the "Online" emulator program from 

    http://www.markspace.com/online.html


 ..............................................................................

    Mark/Space Softworks
    Third Floor
    111 West Saint John
    San Jose, CA 95113

    Voice: +1 408/293-7299
      Fax: +1 408/293-7298


    TRG Products, Inc.
    2851 104th Street
    Des Moines, IA, 50322

    Voice: +1 515/252-7522
      Fax: +1 515/252-7525
    Email: handheld@trgnet.com
      Web: http://www.trgpro.com/

        [UPDATE  2001-05-31:  TRG Products has changed its name. (Good move!)
         Now refer to the HandEra, Inc. firm:

           http://www.handera.com/

           Corporate Headquarters 
           HandEra, Inc. 
           2859 104th Street 
           Des Moines, IA 50322 
           Voice: +1 515/252-7522 
             Fax: +1 515/252-7525 

           Sales Office voice: +1 314/351-0289
           Sales Office   fax: +1 314/351-0042 
        ]


 //////////////////////////////////////////////////////////////////////////////

One source asserts that the Handspring Visor PDA can support being online while
simultaneously using the keyboard, connecting via the Springboard modem.

    http://www.handspring.com/
    http://www.handspring.com/products/mmodem.asp

    Handspring, Inc.
    189 Bernardo Avenue 
    Mountain View, CA 94043

    Voice: +1 650/230-5000 


 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
Date: 14 May 2000 23:59:02 GMT
Organization: TSS Inc.
Message-ID: <8fnek6$ak4$1@citadel.in.taronga.com>
From: Peter da Silva <peter@taronga.com>
Subject: Re: Can Visor/TRG work with KB and modem symultaneously?

Alan Hoyle  <alanh@unc.edu> wrote:
>Can either the Visor or the TRGPro work with both a keyboard and modem
>symultaneously?


I use my Visor with the Handspring modem and GoType keyboard quite often.

The reason you can't do IR and serial concurrently is that there's only one
UART shared between the two ports. The Handspring modem has its own UART.

-- 
Rev. Peter da Silva, ULC.

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
Message-ID: <8fpf4d$1l8e$1@citadel.in.taronga.com>
References: <391F66BE.65F8CFC3@ix.netcom.com>
Date: 15 May 2000 18:19:57 GMT
Organization: TSS Inc.
From: Peter da Silva <peter@taronga.com>
Subject: Re: Gotype & Visor

In article <391F66BE.65F8CFC3@ix.netcom.com>,
JD  <jdupree@ix.netcom.com> wrote:
> 
> Would a Handspring Visor be able to use a Palm GoType keyboard?
> (I know there is a GoType Pro available, but I have the
> original keyboard already)


No. The serial interfaces are not compatible.
You need the version for the Visor.

-- 
Rev. Peter da Silva, ULC.

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot, alt.comp.sys.palmtops.pilot
References: <8fc993$kn5$1@neptunium.btinternet.com>
Message-ID: <3919DE7D.BA143460@freenet.carleton.ca>
Date: Wed, 10 May 2000 18:11:09 -0400
Organization: National Capital Freenet, Ottawa, Ontario, Canada
From: K. C. Lee <de351@freenet.carleton.ca>
Subject: Re: Only one serial controller in Palm

Jonathan Statt wrote:
>
> I have just purchased a palm IIIc and folding keyboard. I was hoping to be
> able to use the keyboard while online using the infrared port and my Nokia
> 7110. Unfortunately it seems I have to choose one or the other as there is
> only one serial controller in the Palm. If I am online and hit a key on the

I got an of idea that would work. See this page on my rather new website.
I came up with an idea last night.

    http://www.ncf.ca/~de351/PalmHard.htm

Basically it looks like it is feasible to make a keyboard adapter thingy that
let you have an external keyboard and talk to the serial port at the same time.

I am looking at this as a hobby hardware project right now. I can see some
marketing potentials. There are probably potential markets to fix the problem
for existing products. Note: It would need some additional hardware.

> I feel this is a major letdown. I thought I had finally found the perfect
> combination of small organiser with the ability to become a bit more with
> online and keyboard facilities when needed.

This seems to be a design overlook among a few minor things. The daVinci was
actually designed with a separate keyboard interface.

> Does anyone have any thoughts on this or know if there is some technical way
> to allow both to function?
>
> Many thanks,
> Jonathan

K. C. Lee


 //////////////////////////////////////////////////////////////////////////////

References: <8fc993$kn5$1@neptunium.btinternet.com>
    <3919DE7D.BA143460@freenet.carleton.ca>
Date: 11 May 2000 18:48:16 +0200
Organization: TU Braunschweig, Informatik (Bueltenweg), Germany
Newsgroups: comp.sys.palmtops.pilot, alt.comp.sys.palmtops.pilot
Message-ID: <yks4s85t4mn.fsf@flens.ibr.cs.tu-bs.de>
From: Till Harbaum <harbaum@ibr.cs.tu-bs.de>
Subject: Re: Only one serial controller in Palm

de351@freenet.carleton.ca (K. C. Lee) writes:
>
> I came up with an idea last night.
> http://www.ncf.ca/~de351/PalmHard.htm

This _might_ work for sending which is something, but you will
very likely get trouble with reading input from the keyboard,
since the keyboard will probably not store your key-press
until you release the RS-232 port. It will probably either drop
the button presses or it will try to send it anyway.

Ciao,
  Till


 //////////////////////////////////////////////////////////////////////////////

Newsgroups: alt.comp.sys.palmtops.pilot
Message-ID: <8e8te8$f0h$1@nntp9.atl.mindspring.net>
References: <3907d54b.1759080@news.ispnook.com>
Date: Thu, 27 Apr 2000 01:20:29 -0700
From: NLC <nancy@stonefish.com>
Subject: Re: Palm FOLDING KEYBOARD - DEAD KEYS

Alan M. Prusila, CD wrote:
>
> I just picked up my folding keyboard, and quickly found out that the
> A-S-D and the C keys don't work.
>
> It would appear to be a dead connector within the keyboard to because
> of the proximity of the keys.
>
> Just wanted to see if anyone else has seen this before.

Alan, it could very well be a hardware problem. BUT! If you haven't done
it already, go download the updated driver for the keyboard at
http://www.palm.com/support/downloads/kb_driver.html

The driver you need is "keyboard1.1.zip" (Windows) or "keyboard1.1.sit"
(Mac). You'll see it towards the bottom of the page, labeled as a Beta
version. It's well worth the little bit of time spent to do this update.

Nancy

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: alt.comp.sys.palmtops.pilot, comp.sys.palmtops.pilot
Date: 26 Apr 2000 23:53:49 EDT
Organization: Concentric Internet Services
Message-ID: <3907b8ff.611065110@news.concentric.net>
From: Mike <Michael*9@concentric.net>
Subject: Re: To buy folding keyboard or gotype

On Wed, 26 Apr 2000 15:43:47 GMT, "Mark" <m&m@spam.no> wrote:
>
> My main concern is durability of the folding unit.   Any thoughts?


I wouldn't be too concerned with durability.  I've had mine for almost
a month with no problems.  I use it every day, I take it to all
meetings, so it's getting folded and unfolded a dozen or so times a
day.  I even dropped it yesterday and no ill effects.

It strikes me as a very well constructed device, and much easier to
type on that the GoType!.

I highly recommend the PPK.

Mike

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: alt.comp.sys.palmtops.pilot, comp.sys.palmtops.pilot
Message-ID: <aY%N4.6438$Nd6.1037519@news-west.usenetserver.com>
From: Jim <support@thinkoutside.com>
Subject: Re: To buy folding keyboard or gotype
Date: Thu, 27 Apr 2000 11:44:50 -0700

Mark, et. al.

The PPK was designed to meet all of the durability requirements of notebook
computers. The keys will last a minimum of 7 million cycles, as they are the
costly scissors-type mechanism found in the best notebooks. The product can
be opened and closed tens of thousands of times, more than the number of
cycles a notebook lid is designed for. It was designed to pass extreme
temperature testing and drop testing. Hundreds of units have been tested the
equivalent of ten years or more of use with virtually no failures. Palm has
very stringent requirements which this product meets. The keyboard is
constructed out of aluminum and special plastic similar to what is used in
notebook computers. The flexible circuits are designed to flex the
equivalent of at least 10 years use as well.

Just some food for thought.

Jim


  [Archiver's Note:

   The Think Outside firm makes the folding keyboard,
   also known as the "Stowaway", sold by Palm as the PPK: see
   http://www.thinkoutside.com/pr022200_2.html

   This equivalent product for Visor seems to be sold by Targus.
  ]

 //////////////////////////////////////////////////////////////////////////////

About the new Stowaway XT compact design for 2002 Palm devices:
    http://www.visorcentral.com/content/Stories/1492-1.htm
    http://www.visorcentral.com/content/Stories/1492-2.htm
    http://www.visorcentral.com/content/Stories/1492-3.htm

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: alt.comp.sys.palmtops.pilot, comp.sys.palmtops.pilot
Date: Wed, 26 Apr 2000 17:48:19 GMT
Organization: Pirate Ship Revenge
Message-ID: <8e7a4t$hb9$1@nnrp1.deja.com>
From: Ed the Red <edthered@my-deja.com>
Subject: Re: To buy folding keyboard or gotype

"Mark" <m&m@spam.no> wrote:
>
> My main concern is durability of the folding unit.   Any thoughts?

Sorry, I don't have a Stowaway keyboard but I like my GoType a lot
and it is significantly cheaper, especially when you factor in the
free word processor and thesaurus that comes with the GoType.

Another option to consider is the Happy Hacking Cradle that lets
you use any PC keyboard.  I have one of these too and it is pretty
sweet.  It is also much cheaper than the folding keyboard.

-- 
Palm InfoCenter
http://www.palminfocenter.com/

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot, alt.comp.sys.palmtops.pilot
References: <8fc993$kn5$1@neptunium.btinternet.com>
    <3919C291.55EA9E3E@abbott.com> <8fci2g$l0k$2@news7.svr.pol.co.uk>
Date: Wed, 10 May 2000 18:14:40 -0400
Organization: National Capital Freenet, Ottawa, Ontario, Canada
Message-ID: <3919DF50.649E7A30@freenet.carleton.ca>
From: K. C. Lee <de351@freenet.carleton.ca>
Subject: Re: Only one serial controller in Palm

Logie Urquhart wrote:
>
> It would be possible to write software which would allow both ports to be
> multi-tasked. i.e the serial port is open for a period of time, closed, then
> the ir port opened and used for a period of time.
>
> This would be technically difficult, as there would a lot of timming issues
> to overcome, but it could prove to be a very usefull program.

Not to mention that the phone bill would go through the roof...

K. C. Lee

 //////////////////////////////////////////////////////////////////////////////

Date: 14 May 2000 15:50:33 GMT
Organization: The University of North Carolina at Chapel Hill
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <8fmi09$ads$1@news2.isis.unc.edu>
From: Alan Hoyle <alanh@unc.edu>
Subject: Can Visor/TRG work with KB and modem symultaneously?

Can either the Visor or the TRGPro work with both a keyboard and modem
symultaneously?  It looks like it's possible to connect both, but
there have been issues in the past with PalmOS devices only supporting
one device at a time.  E.g, most devices couldn't do IR and Serial
communication at the same time (except for ones with the PIII IR
upgrade card).

Has anyone tried it yet?

-alan

 //////////////////////////////////////////////////////////////////////////////

Date: Mon, 15 May 2000 08:16:20 wst
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <B54562D4yf@krisjohn.net>
From: Kris' Haven <news1@krisjohn.net>
Subject: Re: Can Visor/TRG work with KB and modem symultaneously?

Yes, both of them.  I've done it with a TRGpro, pretec Compact
Flash modem & Stowaway (PPK) keyboard.  There's a pic at

    http://members.optusnet.com.au/~kris_j/trgkeymod.jpg

(or was that trgmodkey.jpg?)


 //////////////////////////////////////////////////////////////////////////////

For tips on connecting to Palm via USB from a PC:

    http://www.jimthompson.net/pilot/Tips/COM%20Ports.htm

 ..............................................................................

Sources of serial cables for Handspring Visor PDAs:

    Mark/Space Softworks
    http://www.markspace.com/datacord.html

    Delorme/Eartha Systems
    http://www.delorme.com/earthmate/accessories.asp

 ..............................................................................

Commentary on word processing on a Palm device, using a keyboard:

    http://www.jimthompson.net/pilot/wordproc.htm

    http://www.dansdata.com/palmiiix.htm

 //////////////////////////////////////////////////////////////////////////////


References: <slrn8ia46m.tea.charlie@public.antipope.org>
    <1eavmdt.1owhzdy1rmo0w0N%Steve@stevehow.demon.co.uk>
Date: Fri, 19 May 2000 11:09:48 GMT
Organization: DataCash Ltd
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <slrn8ia8cq.tj2.charlie@public.antipope.org>
From: Charlie Stross <charlie@nospam.antipope.org>
Subject: Re: Palm Keyboard - menu question

Stoned koala bears drooled eucalyptus spittle in awe
as <Steve@stevehow.demon.co.uk> declared:
>
>I've been wondering to about how to access the menus. Also the Cmd-Left
>arrow key for moving the cursor to the beginning of the line seems to
>behave strangely. In memo it goes to the end of the next line above so
>you then have to <right arrow> to get to the beginning of the line. Is
>it supposed to work like that?
>It <is> a beautiful piece of hardware though.


Did a bit more experimentation. Looks like most of my problem is due to
using TakeNote! with the PPK.


Command-<accelerator>, where <accelerator> is the key associated with a
menu option, works. The big problem with TakeNote! is that it uses
1,2,3,7,8,9 as accelerators for cursor movement -- go to top of document,
that sort of thing. These are mapped by the PPK keyboard driver to switch
to the Palm's built-in apps (which isn't totally stupid, but due to a
bug in TakeNote! on the Palm IIIc causes fatal exceptions that need a
reset to get out of).

Some way of moving around the menus (using the arrow keys) would be rather
useful, for example for getting at menu items with no defined accelerator ...


-- Charlie

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
Message-ID: <392547E3.322BE67D@vonkaenel.net>
References: <39252895.720D7A00@keithfinch.com>
Date: Fri, 19 May 2000 13:55:21 GMT
Organization: Skidmore College
From: Pierre A. von Kaenel <pierre@vonkaenel.net>
Subject: Re: Slow Palm Keyboard

Keith Finch wrote:
>
> Anyone else out there disappointed at the slow typing speed of the Palm
> Portable Keyboard?  My
> typing is always several words ahead of the cursor, and I always find myself
> waiting for the Palm to
> catch up with me.  Any ideas how to fix it?  Or are there other fast typers
> out there who haven't
> had any problems?
>
> And yes, I'm using version 1.1 of the keyboard driver.


The original driver is at fault.  There is a beta driver that everyone
recommends.  I've gotten it and it does improve things.  Find it at the
palm web site.

-- 
***************************************************************
Pierre A. von Kaenel
Assoc. Prof., Math & Computer Science Dept.
Skidmore College
Saratoga Springs, NY 12866

pierre@vonkaenel.net

"Simplify, simplify, simplify" - Thoreau
***************************************************************

 //////////////////////////////////////////////////////////////////////////////


Newsgroups: comp.sys.palmtops.pilot
Date: Fri, 19 May 2000 14:40:34 GMT
Organization: Sympatico
Message-ID: <CncV4.90229$r37.1180221@news20.bellglobal.com>
From: Michael Wong <michaelwong@sympatico.ca>
Subject: Re: Slow Palm Keyboard

Hmm... that sounds odd - using the driver v.1.0 resulted in the problem you
describe - however I upgraded to the beta 1.1 version like you have and
found that the "slow" problem completley corrrected on my IIIx with OS3.3.

I type at 60-70 wpm if that helps.

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
References: <slrn8ia46m.tea.charlie@public.antipope.org>
Date: Fri, 19 May 2000 15:48:43 GMT
Organization: AT&T Worldnet
Message-ID: <vndV4.73339$fV.4543443@bgtnsc05-news.ops.worldnet.att.net>
From: JP <j_paulHOLDTHESPAM@worldnet.att.net>
Subject: Re: Palm Keyboard - menu question

Charlie Stross wrote in message ...
>The Palm portable keyboard is a beautiful piece of hardware, but there's
>one thing that's bugging me: I haven't been able to figure out how to
>access menu commands from the keyboard.
>
>I know the Fn/Menu key combo pulls down whichever menu was last activated,
>but to actually select an option from a menu doesn't seem do-able using
>the keyboard; or at least, I haven't been able to figure it out.
>
>The manual doesn't go into any detail on this, and neither does the
>support FAQ. Anyone got an answer?

From what I have read, this is a limitation of the PalmOS.  It was developed
for pen based input... unfortunately the only way to access some menu
commands is to tap on the array of pixels after hitting menu.  The only
workaround is to memorize the command letters... IE hit the CMD key and D
will initiate the delete command.  Of course not all menu options have
corresponding CMD letters.  So keep your stylus handy.

 //////////////////////////////////////////////////////////////////////////////


Newsgroups: comp.sys.palmtops.pilot,alt.comp.sys.palmtops.pilot
References: <s1.a1.382Q8N0MN8G7L1EI7.NR@texas.net>
Date: Sat, 03 Jun 2000 18:52:29 GMT
Organization: AT&T Worldnet
Message-ID: <Ntc_4.1618$vc5.117839@bgtnsc04-news.ops.worldnet.att.net>
From: Chris Briskorn <chris.briskorn@worldnet.att.net>
Subject: Re: Problems with Palm V keyboard?

Steven Folberg wrote in message ...
>Hi, Folks --
>
>I just got a new Palm brand keyboard for my Vx. It's a fabulous
>device, elegantly designed and useful. It makes serious, real-time
>note-taking in meetings a real option if you're a reasonably quick
>touch-typist. I highly recommend it. I chose it over the less
>expensive Go Type keyboard because, even with my relatively small
>hands, I thought that the Go Type's rubbery little keys would drive
>me nuts. (The Palm keyboard is full-size!)
>
>I do have a couple of questions for any of you who own one, though.
>
>1) Is there any way, when you enter the Memo application and first
>see your Memo List screen for a given category, to use the keyboard
>to select and open a particular memo from the list? The guy I got on
>Palm support had no idea. I'm beginning to suspect that the answer is
>"no."
>
>2) I can't get some of the basic keyboard text navigation shortcuts
>to work. For example, ctrl-right-arrow doesn't skip one whole word to
>the right, and shift-cursor doesn't select text like it's supposed
>to. Do I have a defective keyboard?
>
>Thanks for any insights!
>
>Steve
>--
>rebbi@texas.net
>http://lonestar.texas.net/~rebbi


I bought a new foldable keyboard very recently too.  I originally loaded the
driver that came in the box on the cd and the keyboard acted very strangely.
I reloaded with the most current driver and it works perfectly.  I love this
keyboard.

 //////////////////////////////////////////////////////////////////////////////


Newsgroups: comp.sys.palmtops.pilot
Message-ID: <39393a3e_3@news1.prserv.net>
From: Arctic Storm <-SpamShield-ArcticStorm@usa.net-SpamShield->
Date: Sat, 3 Jun 2000 13:00:28 -0400
Subject: Keyboard Hack work with folding-away Keyboard?

Does Keyboard Hack work with the fold-away keyboard?
For example, if I were to change the key layout to Dvorak in the Keyboard
Hack, will I be able to type in Dvorak on the fold-away keyboard?


-- 
ArcticStorm@usa.net

 //////////////////////////////////////////////////////////////////////////////


Newsgroups: comp.sys.palmtops.pilot
Message-ID: <38E3E6B54E455406.3C201B65D2244A6B.A63DDF6723B7BC91@lp.airnews.net>
X-Orig-Message-ID: <3938ce0b.86467237@news.airmail.net>
References: <bu8Z4.3609$oL4.77523@news2.nokia.com>
    <KktZ4.18751$Ad6.151521@typhoon.southeast.rr.com>
Date: Sat, 03 Jun 2000 09:26:07 GMT
Organization: University of Tokyo
From: Ken Kobayashi <ken.kobayashi@nao.ac.jp>
Subject: Re: Palm to PC keyboard

On Thu, 01 Jun 2000 13:14:18 GMT, "Rick Stetson"
<stetsonr@mindspring.com> wrote:

>Guillermo,
>
>You might also want to  check out the Happy Hacking Cradle at
>http://www.pfuca.com/products/hhkb/hhcindex.html.  I don't have personal
>experience with this device, but have seen it mentioned here before.

Notice that the page says it supports "any PS/2 interface 101/104
keyboard with power consumption less than 5V/50mA."  I hear many
standard keyboards exceed consume more power and don't work.  Their
own Happy Hacking Keyboard does work, of course, but for the price of
this combination, I think you can get that fancy folding keyboard
(Palm Portable Keyboard).

Personally I went for a GoType! keyboard instead.

Ken Kobayashi
http://www.din.or.jp/~kobaken/

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
Date: Sat, 03 Jun 2000 07:07:13 GMT
Organization: @Home Network Canada
Message-ID: <3938AE8D.611F20A5@hotmail.com>
From: Horace Ho <bewhoiam@hotmail.com>
Subject: ANN: Swedish Keyboard

  Keyboard Hack v2.1 now supports Swedish keyboard.

  More info at: http://palmgadget.com/palmkeyb.html

  Thanks
  horace

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
Message-ID: <009e0340.5b6ad8c4@usw-ex0103-018.remarq.com>
References: <uwvi7k3ho.fsf@darwin.eeb.uconn.edu>
X-Originating-Host: 12.73.120.53
Date: Thu, 27 Jul 2000 09:10:06 -0700
From: lhauser <lhauser@pobox.com>
Subject: Re: Fitaly and text entry

kent@darwin.eeb.uconn.edu wrote:

>1) If I were going to see a significant benefit to text entry from
>   Fitaly, would I have seen it by now, or am I being too impatient?

It took me a surprisingly long time to get "good" at Fitaly. For
a long time after I registered it I still used a lot of
Graffiti, and even some of the text completion applications. It
wasn't until I made a mental committment to use Fitaly for all
my input that I got any good at it (I now use it for about 95%
of ALL text entry, and I write heavily on my Palm).

>2) I do not do much actual writing or editing on my Palm. Text entry
>   tasks consist of short notes (to-do's) or entries to standard or
>   add-on databases (datebook, addressbook, ThinkDB databases,
>   Arranger outlines). Given that I rarely enter text consisting of
>   more than half a dozen words, am I ever likely to benefit from>   Fitaly?

How good are you at Graffiti? I know there are some people who
just never get the hang of Graffiti. If you're comfortable with
Graffiti, at the level of text entry you do, Fitaly probably
won't be of great benefit. If, on the other hand, you find
yourself trying to use the built-in keyboard, you might as well
get Fitaly and take advantage of its strengths.

Fitaly's advantage is that (once you get the hang of it) it's as
fast or faster than Graffiti and far superior to the QWERTY
keyboard for stylus input, and definitely better than the built-
in keyboard for any kind of input.

Hope this helps!


-----------------------------------------------------------

Fitaly on-screen keyboard:
(from Textware Solutions)

    http://www.fitaly.com/

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: rec.arts.sf.fandom, alt.folklore.computers
References: <127e4692.0307300443.134514f3@posting.google.com>
    <bjoq9t$l2a$1@panix3.panix.com> <bjotdv$ac6$1@wheel2.two14.net>
    <3F6052F7.5050602@cox.net> <bjrakk$gu1$1@panix2.panix.com>
    <slrnbm3ajj.4nn.armb@chiark.greenend.org.uk>
    <bjsf8o$svq$1@wheel2.two14.net> <Yyi9b.3$ta1.12402@news.uswest.net>
    <bk4fjg$h9g$1@wheel2.two14.net>
Message-ID: <_cR9b.1082$Lo1.143954@news.uswest.net>
Date: Tue, 16 Sep 2003 22:16:28 -0600
From: Russ Holsclaw <russ@holsclaw.nyet>
Subject: Re: Keyboard layouts (was Re: Feeling Old)

"Cally Soukup" <soukup@pobox.com> wrote in message news:bk4fjg$h9g$1@wheel2.two14.net...
>
> (Followups set to rec.arts.sf.fandom)
>
> Russ Holsclaw <russ@holsclaw.nyet> wrote in article <Yyi9b.3$ta1.12402@news.uswest.net>:
>
> > On my Palm-based Clie, however, I use the "FITALY" arrangement, a
> > "keyboard" optimized specifically for poking with a stylus. So
> > far, I've found no mental conflict between "fitaly" and "qwerty"
> > because the movements are so different, anyway.
>
> I've never seen the FITALY arrangement; is it possible to describe why
> it's good for stylus-poking?  Or would I have to borrow someones PDA
> and try it myself?


The so-called FITALY arrangement is so named for the same reason
that QWERTY is called what it is:

The "keyboard" is either displayed on the screen (as in PocketPC
implementations) or pre-printed on a plastic-coated overlay that
is stuck on over the Palm's "Graffiti" area. There is also a
displayed-template version for Palm machines, but it uses a hack
that only works on monochrome Palm PDA's.  The version the
requires the pre-printed sticker is called "Fitaly Stamp". When
you buy it, it comes with about 4 stickers, so you can replace
worn-out ones. Additional stickers are available separately.

The central arrangement of little squares looks like this:
(fixed-pitch font recommended)

    z v c h w k
    f i t a l y
        n e
    g d o r s b
    q j u m p x

The two "gaps" in the middle row act as dual "space bars". The
idea is that most common characters are grouped around the middle
of the array, with less-frequent characters situated further out
at the edges. Also, common letter sequences tend to require
minimal movement to go from one letter to another.  For example,
the word "that" is formed by poking letters in a tight little
triangle.

Capital letters are formed either by use of a "shift" pad at the
edge or by sliding the stylus a certain amount after tapping a
letter. Shorter slides are used to enter foreign-language
characters with accents, umlauts, etc. Slides can also be
customized to enter other characters or common words and phrases.

Further to the left and right of the "letter square" are other
squares the produce numbers, special characters, and other
controls. To make room for all this, the standard four icons at
the corners of the Graffiti pad have been moved into a tight
little column at the left, and the PalmOS hacked to make this
re-arrangement work. There is a spot you can tap to toggle
between FITALY-mode and Graffiti mode, if you wish.

The arrangement is patented by the company that makes it,
Textware Solutions. Their literature says that it was the product
of computer-analysis of letter sequences to produce an optimized
arrangement, although I think they favored the arrangement that
also produced easy-to-remember letter sequences such as Italy,
Jump, and Do(o)rs.

They advertise that you can do 50 wpm with practice. I've only
managed to sustain about 30 wpm so far, but that's still quicker
than Graffiti, and a good deal more accurate. The record is
something over 80wpm by a hot-shot who undoubtedly practiced the
test sentence unceasingly until he could do it in his sleep.

(BTW, for the "Palm-illiterate" the term Graffiti refers to the
system of "writing" movements normally used to enter characters
into a Palm-OS PDA. It's a whole subject unto itself.) Some of
the newer PalmOS machines have dispensed with Graffiti and have
opted for little "thumb keyboards" in the standard qwerty
arrangement. I imagine that those work best for people with small
thumbs. Never tried 'em though.

Some people have started wearing little "stylus rings" that you
wear on the tip of your index finger like a guitar pick. In
general, sharpened fingernails are not recommended, because you
can scratch the plastic screen overlay.

The Textware website is

    http://www.fitaly.com/

You can download a demo, if you have a Palm or PocketPC (Windows CE) PDA.

 //////////////////////////////////////////////////////////////////////////////


Date: 27 Jul 2000 15:05:14 GMT
Organization: TSS Inc.
Newsgroups: comp.sys.palmtops.pilot, alt.comp.sys.palmtops.pilot
Message-ID: <8lpj3a$30gl$1@citadel.in.taronga.com>
From: Peter da Silva <peter@taronga.com>
Subject: Re: Modem & Visor...telnet/SSH?

In article <slrn8nvlqv.38p.robotech@haven.eyrie.org>,
Robotech_Master <robotech@eyrie.org> wrote:
>I've noticed that there are now two modems available for the
>Visor--the big ol' Handspring one, and a smaller Springboard
>formfactor one.  It advertises being able to send and receive email
>and surf the web and such...but what I'm wondering is whether you can
>access a telnet or SSH application with it?  And whether someone's yet
>ported a MUD client like TinyFugue?

There are a number of high quality telnet clients available for the Palm
OS, but the only SSH (Top Gun SSH) is pretty minimal... it doesn't provide
much of a terminal emulation.

--
Rev. Peter da Silva, ULC.

"Be conservative in what you generate, and liberal in what you accept"
        -- Matthew 10:16 (l.trans)

 //////////////////////////////////////////////////////////////////////////////

For the record:  the above is the "Revised da Silva Version" of the Bible.
The New International Version renders the words of Jesus in Matthew 10:16
in English as follows:

    "I am sending you out like sheep among wolves.
    Therefore, be as shrewd as snakes or as innocent as doves."

 http://bible.gospelcom.net/cgi-bin/bible?language=English&version=NIV&passage=Matthew+10:16

The phrase given by Mr. da Silva is apparently a quote from Jon Postel, the
Internet Robustness Principle.  See "http://www.ietf.org/rfc/rfc793.txt".

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
Message-ID: <sq6do8c1t91130@corp.supernews.com>
References: <8nuchk$sl2$1@nnrp1.deja.com>
    <8nufl1$2gvt$1@citadel.in.taronga.com>
Date: Wed, 23 Aug 2000 02:29:28 GMT
From: KeithL29@intercom.com
Subject: Re: keyboard concerns for Palm V


Peter da Silva wrote:
>
>
> In article <8nuchk$sl2$1@nnrp1.deja.com>,
> Leland H. Jr.  <leland_jr@my-deja.com> wrote:
> >I'm looking into getting either a gotype or palm keyboard [...]
>
> >I just need some recommendations on how to pull this off...What
> >software can I easily and quickly use to pull my documents off the palm
> >and into a text file? I don't want to burden my friend by taking hours
> >to sync my palm on his laptop...I just need something that I can use to
> >type papers, letters and notes (without formatting) and that I can then
> >convert to txt and go back and forth with ease.
>
> If you get the GoType keyboard it will come with a program and conduit called
> TakeNote that will automatically back up your DOC files in the Palm as TXT
> files on Windows, and vice versa.
>
> --
> Rev. Peter da Silva

TakeNote that comes with the gotype is very good for what you've
described, I use it in the same way you've described. If you're only going
to be typing on flat surfaces, get the palm folding and buy takenote from
landware or another similar program, such as pendit. I have the gotype
which is more suitable for my purposes working on airplanes, trains, and
on my lap, but the palm is more compact which may be important if you're
carrying it around campus, although the gotype is also very portable. On
the other hand, if you're a student and looking for the best value, the
gotype with the free software, which includes a thesaurus, is 70 bucks
while the palm is 100 and the takenotes program purchased separately is
another 40, so effectively it's twice as expensive. If you're a good
typist, you'll likely type just as well on both keyboards. The gotype has
full sized keys, they're just spaced a little closer together, while the
palm has full sized keys that are arranged in the size of regular
keyboard. Unless you have fat fingers, you'll quickly adapt to the gotype.

-- 

 //////////////////////////////////////////////////////////////////////////////

Date: Wed, 23 Aug 2000 10:40:12 -1000
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <1eftbio.16huhcu10iak54N%scott-i@usa.net>
From: Scott Ishiyama <scott-i@usa.net>
Subject: Re: keyboard concerns for Palm V

Leland Sabon <leland_sabonABC123@softhome.net> wrote:

> Thanks for the tips...I think I'll try to wait a bit for the Palm folding
> as it's just TOO cool :) I'd also rather not adapt to a small keyboard as I
> find that it can be somewhat uncomfortable...Of course, if I'm forced to
> save $30 plus $oftware then so be it ;-)

You didn't mention whether size or weight factored into your travel
plans, but also consider that you can charge and HotSync your Palm V
through the GoType Pro keyboard, eliminating the need to pack the
HotSync cradle.  You will still need to carry the Palm V AC adapter and
a serial cable.  The last I checked, this wasn't possible using the Palm
folding keyboard.

The full-sized keys of the Palm folding keyboard are nice, though,
especially if you're going to do lots of typing on a stable surface.

--
Aloha, Scott

<scott-i(at)iname.com>

 //////////////////////////////////////////////////////////////////////////////

NNTP-Posting-Host: 209.179.196.88
Date: Fri, 01 Sep 2000 00:39:44 GMT
Organization: EarthLink Inc. -- http://www.EarthLink.net
Newsgroups: comp.sys.palmtops.pilot, alt.comp.sys.palmtops.pilot
Message-ID: <hkanner-4679B1.17394331082000@news.earthlink.net>
From: Herbert Kanner <hkanner@earthlink.net>
Subject: Pal Portable Keyboard

My long awaited PPK arrived last Saturday.  It is not often that a
purchase exceeds my expections, but this one definitely does.  I did not
expect such a crisp key action--I can just go like a bat out of hell on
it.  I thought my GoType had pretty good action, but in comparison, the
GoType feels like a wet sponge.

I'm keeping the GoType; there are occasions when I need to be able to
type comfortably with the keyboard on my lap.

My only complaint, and technically it can't really be a complaint about
the keyboards, is the incompatibility between Palm and Visor.  Now,
because of the keyboards, when my old Palm Personal (upgraded to Palm
III) drops dead, I will be forced to buy another Palm instead of being
in a position to compare Palm and Visor and make a decision.

Herb

-- 
Herbert Kanner <kanner@acm.org>

 //////////////////////////////////////////////////////////////////////////////


References: <slrn8r9oso.c2s.charlie@antipope.nsl.co.uk>
Date: Tue, 5 Sep 2000 13:53:10 +0100
Organization: foobar quux
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <slrn8r9r5l.c2s.charlie@antipope.nsl.co.uk>
From: Charlie Stross <charlie@nospam.antipope.org>
Subject: Re: Palm Portable Keyboard and doc editors

Stoned koala bears drooled eucalyptus spittle in awe as I declared:
>
>This is a real pain when using SmartDoc or WriteNow!, both of which
>use command-<digit> to move around the document. Anyone got a work-
>around that lets you navigate a document without constantly needing
>the pen? (Tried bookmarks in WriteNow! -- didn't work, you could get
>at the go to bookmark menu entry, but still needed the pen to select
>one to jump to. Aargh.)

I've spent a couple of hours poking around the net and come up with a
partial answer: use a non-existent <cmd>-<character> chord, _then_
press the key for the shortcut you want. For example, press <cmd>-`
(the backquote/tilde character, to the right of the space key). Release
it, and you'll see the little command popup at the bottom of the screen;
hit "1" to go to the top of the document in WriteNow!, or "9" to go to
the bottom of the document. Whereas pressing <cmd>-1 will helpfully
bounce you into some other application ...

To say this is counter-intuitive is an understatement: this user
interface feature ought to be taken out and shot.



-- Charlie

 //////////////////////////////////////////////////////////////////////////////


References: <F6089C62DB41ABFC.9D2953F01BEF4AFF.E301FA127879082D@lp.airnews.net>
Date: Tue, 5 Sep 2000 23:01:13 -0700
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <#51Ivf8FAHA.279@cpmsnbbsa07>
From: Mheikka <mheikka@x-nospammer.hotmail.nojunk.com>
Subject: Re: Palm Portable Keyboard arrow keys don't work in lists

"Steve" <steve@microknox.com> wrote 
>
> Whenever a list appears, like a phone list, or a category list or others,
> one would assume the arrow keys would work to arrow down to the next line in
> the list or arrow up to the previous line.  The arrows on my Portable
> Keyboard by Palm will not function this way.  Has anyone encountered this
> problem?

The Palm OS doesn't support those kinds of keyboard actions.

See: http://www.targus.com/faq_detail.asp?sku=PA800U#420

Use shortcuts instead (which can be activated by the keyboard).

 //////////////////////////////////////////////////////////////////////////////

 Review of Palm Portable Keyboard by Jonathan Ezor

 http://www.pdajd.com/reviews/review-33.xml

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: alt.comp.sys.palmtops.pilot,comp.sys.palmtops.pilot
Message-ID: <8turt3$blj$1@zingo.tninet.se>
NNTP-Posting-Host: ip235.143.78.195.hogia.net
Date: Fri, 3 Nov 2000 18:09:24 +0100
From: "Lennart Floreby" <lennart.floreby@home.se>
Subject: DVORAK Palm Portable Keyboard - Now it is here.

Now you can download DVORAK drivers for PALM PORTABLE KEYBOARD.

http://hem.fyristorg.com/scappk/

These are patches of the original PPK driver.
The DVORAK patch is produced by Don Singer.

You can also download my older patches for Swedish, Finnish, Danish,
Norwegian and Polish keyboard layouts. Follow the link for details.

Lennart Floreby, Sweden

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: alt.comp.sys.palmtops.pilot,comp.sys.palmtops.pilot
Message-ID: <jerry-E67EB8.02042904112000@paloalto-snr1.gtei.net>
References: <8turt3$blj$1@zingo.tninet.se>
Organization: Manual Labor
Date: Sat, 04 Nov 2000 10:04:31 GMT
From: Jerry Kindall <jerry(at)manual.com>
Subject: Re: DVORAK Palm Portable Keyboard - also for Visor!

Lennart Floreby wrote:
>
> Now you can download DVORAK drivers for PALM PORTABLE KEYBOARD.
>
> http://hem.fyristorg.com/scappk/
>
> These are patches of the original PPK driver. The DVORAK patch is
> produced by Don Singer.

I've also just made a quick-and-dirty Dvorak version of the driver for
the Targus Stowaway Keyboard for the Handspring Visor, which is
essentially the same keyboard (although the driver appears to be rather
different).

It is available at:  http://www.manual.com/DSK4HSV.zip

-- 
Jerry Kindall

Mac OS X: Why 2001 won't be like "2001"

 //////////////////////////////////////////////////////////////////////////////


Newsgroups: comp.sys.palmtops.pilot
References: <B625B169yf@htcbristol.co.uk>
Message-ID: <3A015BF4.9BD0659A@pdalive.com>
Date: Thu, 02 Nov 2000 20:20:05 +0800
From: "PDAlive.com" <contact@pdalive.com>
Subject: Re: Palm Keboard Model?

Dave North wrote:

> Dear All
>
> I am looking at buying a keboard for my Palm 3e.
>
> I have been looking around at prices.
> (uk firms) Inmac/Microwarehouse have two models the 3c10317u &
> the 2410439u the latter being 10-15 cheaper. I have looked at
> the palm website & the former would appear to be the only model.
>
> Inmac appear to suggest both are for the 3 series.
>
> Any  ideas
>
> Dave

Dear Dave,

The 3c10317u is the latest revision of the Palm Portable Keyboard which
allows usage with the m100, Palm III series and Palm VII Series, while
the 2410439u is the older revision that only allows usage with the Palm
III and VII Series.

Yours Truly,
PDAlive.com

 //////////////////////////////////////////////////////////////////////////////


Newsgroups: comp.sys.palmtops.pilot
Message-ID: <Z1LM5.210$%%1.16202@bgtnsc05-news.ops.worldnet.att.net>
Date: Sat, 04 Nov 2000 03:05:29 GMT
NNTP-Posting-Host: 12.74.0.189
From: "R.E. Fields" <me@here.net>
Subject: GoType Pro for Palm III

Along with my modem slight misadventure, the other item I bought from
Computers4Sure was a Landware GoType keyboard.

Well, I didn't get a GoType keyboard for the Palm III - I got a GoType *Pro*
for the Palm III/VII series.

The GoType Pro for the Palm III/VII isn't even listed on the Landware web
page.


It has a serial port on the left side (and they also supply a cable) which
allows you to hot-sync with the Palm in the GoType cradle now and it also
has a charge plug on the right side for the Palm V and IBM c3. As with the
other GoTypes, it includes TakeNote and WordSleuth.

Of note, you can't sync and type at the same time and have to slide a little
switch to select GoType mode or hot-sync, but no need to carry around the
cradle if you carry the cable.

I'm a very happy camper!

It's also $54.99 at Computers4Sure - an excellent price.

 //////////////////////////////////////////////////////////////////////////////


Newsgroups: alt.comp.sys.palmtops.hp,alt.comp.sys.palmtops.pilot,
    comp.sys.palmtops,comp.sys.palmtops.pilot
Message-ID: <91rgpi$sad$1@slb0.atl.mindspring.net>
References: <23h14to54nseqpjq4hnu76c1fcoi7ra61j@4ax.com>
    <01c06a99$abac9a10$2921010a@pc3970>
Date: Wed, 20 Dec 2000 15:35:56 -0800
Organization: MindSpring Enterprises
From: "oooieoo" <oooieoo@hotmail.com>
Subject: Re: Palm Portable keyboard

Ruud van der Ham writes:
>> This device has a very high 'wow' factor, which is *NOT* the same as
usability. In other words, I use it a lot to show modern technology,
beautiful design, etc, but I do not really use it ... <<

Yup, a very high WOW factor. I do a lot of catching up on my notes at
Starbucks--or at least I try to. More often than not, I end up doing a demo
for someone when they see what I'm doing.

I don't do many meetings where I need to take notes, but just lately I've
had two of them where I got to whip my little setup out of my bag and type
to my heart's content. I loved it! I actually made it home with notes I
could understand after-the-fact. The only problem with the whole experience
was that the meeting was stopped twice because the person speaking wondered
if he'd said something funny. Nope, I just had been unable to keep from
grinning my stupid head off at the idea of finally being able to use the
Palm/Keyboard in a for-real meeting.

oooieoo

=======================
Ruud van der Ham <Ruud.van.der.Ham@ect.nl> wrote in message
news:01c06a99$abac9a10$2921010a@pc3970...
> | Has anyone tried Palm's portable keyboard (for the Palm3c) ... is it
> | easy to use? Are the keys large anough? Does it eat up a lot of power?
>
> Yes (in my case for the Palm V).
> It is very easy to use, although you need some time to set it up ... It
> does not support all programs fully (i.e. sometimes you still need to tap
> the screen).
> The keys are perfectly sized.
> As far as I know, power consumption is very minimal and does not really
> influences the lifetime of a battery charge.
> This device has a very high 'wow' factor, which is *NOT* the same as
> usability. In other words, I use it a lot to show modern technology,
> beautiful design, etc, but I do not really use it ...
>

 //////////////////////////////////////////////////////////////////////////////


Date: Tue, 19 Dec 2000 16:29:10 GMT
Organization: The World Public Access UNIX, Brookline, MA
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <G5tpsn.9EF@world.std.com>
From: Bob Jenner <bjenner@world.std.com>
Subject: Wild Shortcuts / Palm Keyboard?

Hi All,

Anyone else see the following problem:

The symptom is that every once in awhile the Palm does about a dozen
backspaces.  This can be annoying, especially with terse notes.

It occurs only when the Palm Portable Keyboard Version 1.2 driver is
enabled; then every 16th shortcut entered with the stylus causes a dozen
backspaces.

The shortcuts have to be stylus entered (not KB entered) and active
shortcuts.  That is, if shortcut-X is not defined, it doesn't count toward
the 16 trigger-count.

If the KB driver is not enabled, no problems.

If the KB driver is enabled for 12 shortcuts, then disabled for any number
of shortcuts, then re-enabled, the backspaces will happen after 4 more
shortcuts.

The problem is independent of editor (MemoPad, QED, etc.) and Hackmaster
(all hacks disabled / enabled).

The KB driver is very slick and smart about detecting when the Palm is
placed on the KB.  But the occasional dozen backspaces are so aggravating
I've taken to enabling and disabling the driver each time.

I posted a report to Palm's tech support site a couple of days ago, but no
results yet.


--
Bob Jenner  <bjenner@world.std.com>

 //////////////////////////////////////////////////////////////////////////////


Newsgroups: comp.sys.palmtops.pilot
References: <3A4EA439.FCB5A4DF@earthlink.net>
Message-ID: <3A50BA27.15C53CB4@earthlink.net>
NNTP-Posting-Host: 63.11.185.31
Date: Mon, 01 Jan 2001 17:12:02 GMT
From: John Herron <jherrontx@earthlink.net>
Subject: Re: Prism keyboards

John Herron wrote:
>
> Does anyone know of a keyboard that's compatible with the Handspring
> Prism?
>
> I understand that the Prism has a larger base and uses a  unique hotsync
> cradle.
>
> Landware indicates that their GoType keyboard does not work with the
> Prism; it's only compatible with Handspring Visors.
>
> I saw a keyboard from Targus that might work, but it only works with the
> cradle - that's a bit much to carry.
>
> I heard of some keyboards from a company called Ibiz or something
> similar, but haven't been able to confirm - maybe I got the name wrong.
>
> Anyway, I'd appreciate any info. anyone can provide.  I'd like to switch
> over to a Prism from a Palm V, but I'd like to be sure I can get a
> keyboard for note taking.
>
> I wonder if the Prism's battery life will be a problem.  I need to
> recharge the Palm V after a few days of notetaking.
>
> John Herron
> Austin, TX

And in message <92mc4n$mcb$1@citadel.in.taronga.com>, Peter da Silva wrote:

The Targus keyboard reportedly works with the Prism. It doesn't require the
cradle.

The iBiz keyboard is the one that requires the cradle, and it
reportedly doesn't support the Visor.

 ---------------

Thanks for the responses; and of course ya'll are correct.  The Targus
fold-up keyboard does work with the Prism.

After looking that a picture of the Targus keyboard on their web site, I
went to CompUSA yesterday and checked it out. They had a display keyboard I
tried on  both the Visor and Prism - it worked just as everyone said.

Afterwards, I gleefully bought a Prism and the keyboard.

I really like my Palm V, but the Prism is going to be a lot easier on these
old eyes.

Another respondent recommended that I check the Targus web site for the most
current driver - on my way to doing that now.

Again, thanks to everyone for the info.

John Herron

 //////////////////////////////////////////////////////////////////////////////


References: <934psm$l3t$1@nnrp1.deja.com>
References: <9358pt$3d9$1@nnrp1.deja.com>
Message-ID: <_tr56.137$836.32072@sapphire.mtt.net>
Newsgroups: comp.sys.palmtops.pilot
NNTP-Posting-Host: 142.176.29.92
Date: Fri, 05 Jan 2001 22:00:26 GMT
From: "Jim Thompson" <jimt@jimthompson.net>
Subject: Re: Keyboard starts hotsync

sbring <sven.bring@svekom.se> wrote in message
news:934psm$l3t$1@nnrp1.deja.com...
> I have a TRGPro with TRG's OS 3.5.1. Got a Palm portable keyboard today
> and installed and enabled the keyboard driver v1.2. However, when I put
> the PDA on the keyboard and then every time I touch a key, the PDA
> tries to hotsync. I've disabled all hacks and made a soft reset, but
> that didn't help. Can anyone?

sbring <sven.bring@svekom.se> wrote in message
news:9358pt$3d9$1@nnrp1.deja.com...
> Found the solution in an NG somewhere: Serial/IR in Prefs has to be set
> to Cradle. Why don't Palm say this in the manual?


This is a common and frustrating problem for several posters.   It was one
of the problems I was having with the Palm Portable Keyboard I returned to
the store.  I thought it was a hardware failure in some lots of Palm
Portable Keyboards.

But where exactly are you referring to?  In Preferences/Connections there is
a list of Available Connections.  They are:

Palm Modem US/Canada
Palm Modem UK
IBM WorkPad Modem
Direct Serial (Set to "Serial to PC")
IR to a PC/Handheld
Pretec 56K CF Modem
Direct CF Serial
-----
Jim Thompson
jimt@jimthompson.net

 //////////////////////////////////////////////////////////////////////////////

Date: Sat, 06 Jan 2001 07:49:23 GMT
Organization: Deja.com
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <936im3$4vj$1@nnrp1.deja.com>
From: sbring <sven.bring@svekom.se>
Subject: Re: Keyboard starts hotsync

In article <_tr56.137$836.32072@sapphire.mtt.net>,
  "Jim Thompson" <jimt@jimthompson.net> wrote:
>
> But where exactly are you referring to?  In Preferences/Connections
there is
> a list of Available Connections.

It's Preferences/Serial/IR where the choice is Cradle or Infrared. I
suppose this isn't present in all OSs. Mine is TRG's 3.5.1.


 //////////////////////////////////////////////////////////////////////////////

Date: Sat, 06 Jan 2001 07:57:06 GMT
Organization: Deja.com
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <936j4h$5an$1@nnrp1.deja.com>
From: sbring <sven.bring@svekom.se>
Subject: Re: Keyboard starts hotsync

In article <3A56A0B2.4587271B@bellatlantic.net>,
  stevengt@bellatlantic.net wrote:
>My PPK works fine, yet is always set to IR HotSync.
>Interesting. Perhaps it's just a transient problem, or one brought on by
> a particular combination of apps and settings.
> --

Just to eliminate possible misunderstandings: I'm not talking about
Hotsync's own settings; it's under Preferences/Serial/IR,

I've seen that others have found other remedies for the same symptom.
Maybe the general problem is that the keyboard driver sometimes is too
slow to take over the hotsync signal from the keyboard. What do I know?

Sven

 //////////////////////////////////////////////////////////////////////////////

References: <934psm$l3t$1@nnrp1.deja.com>
    <3A55F58D.C5F1A51E@bellatlantic.net> <9358pt$3d9$1@nnrp1.deja.com>
    <3A56A0B2.4587271B@bellatlantic.net> <936j4h$5an$1@nnrp1.deja.com>
    <3A574191.49E115CA@bellatlantic.net>
Message-ID: <3A577C54.3E6E078D@qub.ac.uk>
NNTP-Posting-Host: drne.fin.qub.ac.uk
Date: Sat, 06 Jan 2001 20:13:08 +0000
Organization: Queen's University Belfast
From: David R Newman <d.r.newman@qub.ac.uk>
Subject: Re: Keyboard starts hotsync

"Steven G. Tyler" wrote:

> sbring wrote:
>
> > Just to eliminate possible misunderstandings: I'm not talking about
> > Hotsync's own settings; it's under Preferences/Serial/IR,
>
> Even more interesting: there *is* no such setting on my TRGPro with OS
> 3.5. Are you perhaps going through the "Connection" option in the
> drop-down list in Preferences? What OS version are you using?

It appears when you install the irenhanc update from 3com's site on
OS's before 3.5.2. That's the one you need to get an IR Hotsync working
properly.

--
Dr. David R. Newman, Queen's University Belfast

 //////////////////////////////////////////////////////////////////////////////

Date: Sun, 07 Jan 2001 05:30:04 GMT
Organization: The Computer Counselor
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <3A57FED0.6BBF5D4F@bellatlantic.net>
From: Steven G. Tyler <stevengt@bellatlantic.net>
Subject: Re: Keyboard starts hotsync

David R Newman wrote:
>
> "Steven G. Tyler" wrote:
>
> > sbring wrote:
> >
> > > Just to eliminate possible misunderstandings: I'm not talking about
> > > Hotsync's own settings; it's under Preferences/Serial/IR,
> >
> > Even more interesting: there *is* no such setting on my TRGPro with OS
> > 3.5. Are you perhaps going through the "Connection" option in the
> > drop-down list in Preferences? What OS version are you using?
>
> It appears when you install the irenhanc update from 3com's site on
> OS's before 3.5.2. That's the one you need to get an IR Hotsync working
> properly.

Ah, I suspect that's the problem, then. Delete the IRenhance (it isn't
needed with OS 3.3 and above) and the original conflict should go away.
--

Steve on Cattail Creek (Steven G. Tyler, Esq.)
<stevengt@bellatlantic.net>

        The Computer Counselor - Technology Consulting for the Law Office


[UPDATE: TRG Products is now HandEra.]


 //////////////////////////////////////////////////////////////////////////////


Newsgroups: comp.sys.palmtops.pilot
Message-ID: <939j44$avh$1@nnrp1.deja.com>
From: sbring <sven.bring@svekom.se>
Date: Sun, 07 Jan 2001 11:15:17 GMT
Subject: Re: Keyboard starts hotsync

> ...Do you have
> IRSync+ or one of the similar patches left over from an earlier model,
> perhaps? That might be the source of the problem.

You're absolutely right. This option belongs to IrEnhance used
especially for communicating with Ericsson phones. It seems this is now
redundant, but I haven't been able to delete the files yet. They're said
to be in ROM, but they're not.

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
Subject: Re: Keyboard starts hotsync
References: <934psm$l3t$1@nnrp1.deja.com>
    <_tr56.137$836.32072@sapphire.mtt.net> <936im3$4vj$1@nnrp1.deja.com>
    <3A5742A7.42DDA7A6@bellatlantic.net> <939j44$avh$1@nnrp1.deja.com>
Message-ID: <3A58A62F.5DFA0E3@bellatlantic.net>
Organization: The Computer Counselor
Date: Sun, 07 Jan 2001 17:24:15 GMT
NNTP-Posting-Host: 151.196.114.10
From: "Steven G. Tyler" <stevengt@bellatlantic.net>
Subject: Re: Keyboard starts hotsync

sbring wrote:
> You're absolutely right. This option belongs to IrEnhance used
> especially for communicating with Ericsson phones. It seems this is now
> redundant, but I haven't been able to delete the files yet. They're said
> to be in ROM, but they're not.

You may need a warm reset (up-arrow and reset pin) first to disable the
file so it can be removed. If it still resists deletion, you might want
to try Z'catalog. It's among the best in letting you get "under the
hood" to tweak the file attributes and surgically remove offending
files. If *that* doesn't work, the offending files may have been written
to flash ROM. If so, you may need to use FlashPro to remove it.
--

Steve on Cattail Creek (Steven G. Tyler, Esq.)
<stevengt@bellatlantic.net>

        The Computer Counselor - Technology Consulting for the Law Office

 //////////////////////////////////////////////////////////////////////////////


References: <934psm$l3t$1@nnrp1.deja.com>
    <_tr56.137$836.32072@sapphire.mtt.net> <936im3$4vj$1@nnrp1.deja.com>
    <3A5742A7.42DDA7A6@bellatlantic.net> <939j44$avh$1@nnrp1.deja.com>
    <3A58A62F.5DFA0E3@bellatlantic.net>
X-Sender: 340072430747-0001@t-dialin.net
Date: Sun, 07 Jan 2001 18:33:37 +0100
Organization: T-Online
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <3A58A871.52A028A0@t-online.de>
From: Erwin Schomburg <Erwin.Schomburg@t-online.de>
Subject: Re: Keyboard starts hotsync

"Steven G. Tyler" schrieb:
>
--snip
> You may need a warm reset (up-arrow and reset pin) first ...

That was a somewhat wobbly answer. If its a system enhancement resisting
deletion, a warm reset is the only way to prepare it for deletion
without wiping all via hard reset, either from the system delete menu or
via tools like Z'Catalog. Getting "under the hood" with Z'Catalog does
not give you the ability to unhook system enhancements. The IR
enhancement extensions are *very* unlikely to reside in FlashPo Flash
space, they don't hook in from there and used to provoke a crash last
time I tried this on an OS3.0.

/Erwin

 //////////////////////////////////////////////////////////////////////////////


Date: Sun, 07 Jan 2001 18:30:34 GMT
Organization: The Computer Counselor
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <3A58B5BB.50E47580@bellatlantic.net>
From: Steven G. Tyler <stevengt@bellatlantic.net>
Subject: Re: Keyboard starts hotsync

Erwin Schomburg wrote:

> That was a somewhat wobbly answer. ...

Well, thanks for the gratuitous review of my answer, Erwin, but what you
suggest is exactly what I said, "wobbly" or not:

First, a warm reset to disable the file. Even disabled, some files will
resist deletion by the system utilities, so an enhanced utility is the
next step. I agree that it's unlikely that the enhancement was written
to flash memory (though this was, in effect, what was reported by the
error message), but in the event this was so, FlashPro should be able to
take it out.
--

Steve on Cattail Creek (Steven G. Tyler, Esq.)
<stevengt@bellatlantic.net>

 //////////////////////////////////////////////////////////////////////////////

Date: Sun, 07 Jan 2001 20:34:21 GMT
Organization: Deja.com
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <93ajsd$2em$1@nnrp1.deja.com>
From: sbring <sven.bring@svekom.se>
Subject: Re: Keyboard starts hotsync

In article <3A58A871.52A028A0@t-online.de>,
  Erwin Schomburg <Erwin.Schomburg@t-online.de> wrote:
> "Steven G. Tyler" schrieb:
> >
> --snip
> > You may need a warm reset (up-arrow and reset pin) first  ...

Problem is, I've already tried doing a warm reset first. It didn't
help. Neither the generic launcher nor DBExplorer nor Filez nor Zarf
can delete it. Hard reset seems to be the only way left.


 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
Message-ID: <q22q9tc861geejh8v7m2g1a224kquivbbs@4ax.com>
Date: Wed, 28 Feb 2001 09:34:52 -0500
From: Steve B. <Drugsls@Hotmail.com>
Subject: Problems with using Portable Keyboard or Beaming with AfterBurner
    3.0t ---Please Help

Hi all,

I originally thought that I was having problems using my portable
keyboard or beaming because of Launch'Em 2.16. However, I am also
using AfterBurner 3.0t along with X-Master to manage my hacks. I've
recently narrowed down the problem to AfterBurner. If I try to use my
keyboard, my Palm attempts to connect to my serial port for what
appears to be a hotsync. If I try to beam information, I simply hangs
at the screen that says "Beam....Searching" until I cancel it or it
times out. I have found that merely unchecking the AfterBurner still
does not solve this issue. I have to uncheck AfterBurner to disable it
and then do a soft reset and then all is well.

Is anyone else experiencing this??? Is there anything that I can do??
I don't mind having to disable AfterBurner if it's absolutely
necessary, but I'd prefer to not have to do a soft reset also. Any
ideas or fixes out there???
Thanks in advance!!!
Regards,
Steve B.

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: comp.sys.palmtops.pilot
Date: Wed, 28 Feb 2001 10:21:12 -0500
Message-ID: <97j51h0slg@enews3.newsguy.com>
From: Jonathan Ezor <jezor@panix.com>
Subject: Re: Problems with using Portable Keyboard or Beaming with
    AfterBurner 3.0t ---Please Help

Many overclocking programs also speed up serial connections in a
a non-standard way.  Since your Hotsync cradle, keyboard and any
IR recipients are set to do serial communications in a standard way,
it's not going to work correctly.  You may need to switch to an
overclocking utility which allows you to select which apps will run at
normal speeds, or which automatically throttles down when any serial
device is in use.

One warning--I have found that the switching back and forth between
fast and slower speeds for serial communications can destablize a Palm
like nothing else, even to the point of requiring a Hard Reset and
restoring of your entire Palm's contents.  BackupBuddy is *essential*
if you're going to experiment with these types of programs.

-- 
{Jonathan}

 //////////////////////////////////////////////////////////////////////////////



Newsgroups: comp.sys.palmtops.pilot
Message-ID: <3a993b89$0$25471$7f31c96c@news01.syd.optusnet.com.au>
From: David Menuhin
Date: Mon, 26 Feb 2001
Subject:  tab key on ppk?

Is anyone having trouble getting the tab key to actually "tab"? It does
allow me to cycle through fields on a form, as advertised, but in an app
>like pedit doesn't seem to produce a "tab", ie a few spaces, when typing in
>some text. Also does not respond when being set as the "esc" key in pedit,
>following the author's instructions of using capital T in the preferences
>dialog, even though he specifically recommends using the tab key of a ppk
as the esc character in the manu

 //////////////////////////////////////////////////////////////////////////////

Date: Mon, 26 Feb 2001 11:48:10 -0500
Organization: OneNet Communications News Hub
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <3a9a88d5_1@news2.one.net>
From: tjr <tom.rhinehart@nospam.usa.net>
Subject: Re: tab key on ppk?

Try using "Fn" "tab"

 //////////////////////////////////////////////////////////////////////////////

Date: Mon, 26 Feb 2001 15:51:36 -0800
Organization: SBC Internet Services
Newsgroups: comp.sys.palmtops.pilot
Message-ID: <c_Bm6.1607$qv3.901674@nnrp5-w.sbc.net>
From: Bobby <beatsone@hotmail.com>
Subject: Re: tab key on ppk? What about in Wordsmith?

The tab key isn't implemented in this version! niether is manual sorting or
masking of records...(from
bluenomad support)
these things are supposed to be coming in version 1.1 with a bunch of other
enhancements..

-b

 //////////////////////////////////////////////////////////////////////////////


Newsgroups: comp.sys.palmtops.pilot
Message-ID: <3AB7FDE2.A94@rpi.edu>
References: <Wo2t6.1886$mh4.83907@news3.oke.nextra.no>
    <FM2t6.889$GG4.18620@news1.oke.nextra.no>
    <k2it6.1136$GG4.30016@news1.oke.nextra.no>
    <MPG.152024a68130d39a9896cb@news.online.no>
    <Xns90695A66386D1DavidToddPsychUMassE@128.119.166.1>
    <MPG.15203158a5367b8a9896cd@news.online.no>
Date: Tue, 20 Mar 2001 20:03:30 -0500
Organization: RPI Department of Chemistry
From: "Curt M. Breneman" <brenec@rpi.edu>
Subject: Re: Which keyboard is the quieter?

Morten Vinje wrote:
> 
> On 19 Mar 2001 08:51:54 -0500, David Todd wrote:
> 
> > On this one point, I had the opposite experience. One of the only things I
> > didn't like as much about the Stowaway was that I found it noiser if typing
> > on a hard surface. The keyboard did not lie perfectly flat, so there was a
> > "clacking" noise from the board hitting the table much of the time. Do they
> > loosen up and lie flatter with use?
> 
> I had the same experiance with mine in the beginning, but not
> anymore, so I guess you're right about that. If it lays flat on
> the surface, it's better and quieter than the GoType! keyboard.
> 
> Morten
> --

Folks,

I've found that mine adapts to the flat surface after a short while and
then is very quiet and nice to use.  By the way - if you have one of
these, you should download the latest driver update from Palm.  It makes
the keyboard much more responsive, and doesn't lose any characters at
the beginning of your typing session (as mine did earlier - I type
pretty fast).

Curt Breneman
RPI Chemistry

 //////////////////////////////////////////////////////////////////////////////

Various serial-port-to-USB adapters are sold by Keyspan

       Keyspan
       Suite 207
       3095 Richmond Parkway
       Richmond, CA USA 94806

  Web: http://www.keyspan.com/
voice: +1-510/222-0131 (information/sales)
voice: +1-510/222-8802 (support)
  fax: +1-510/222-0323
 EMEA: +41 22-343-7852
Email: info@keyspan.com

Keyspan has a product for connecting older 3Com Palm PDAs to USB ports.

 //////////////////////////////////////////////////////////////////////////////

Newsgroups: alt.comp.sys.palmtops.pilot
NNTP-Posting-Host: 68.206.241.102
References: <cj5imj$12kl$1@godfrey.mcc.ac.uk>
Message-ID: <Xns957092CDEC7Astanghalpc@204.52.135.40>
Organization: The human race
Date: 26 Sep 2004 05:54:05 GMT
From: Stan Gosnell <fakename@fakeaddress.com>
Subject: Re: Keyboard Compatibility

Roy Schestowitz <roy-at-schestowitz-dot-com@use-address-before-at.com> wrote 
in news:cj5imj$12kl$1@godfrey.mcc.ac.uk:
>
> I am about to buy a Tungsten to replace my M130 from 2002. I have a dilemma
> though because I don't know if my standard Palm Portable Keyboard (picture
> in the page below) will still be usable. Is there only one such keyboard
> type that fits all the models listed in the page below? Are there different
> models that are compatible with different series?


Any Tungsten with a universal connector should work.  The Tungsten E will 
not, because it only has a mini-USB connector and can't connect to any 
peripherals except via IR.  Make sure you get the latest keyboard driver and 
install all the updates for the Palm you buy.

-- 
Regards,
Stan

 //////////////////////////////////////////////////////////////////////////////

