E11>mou mu m42kit /ro
E11>mou du sysgen /ty:rd52
E11>bo mu


RSX-11M/RSX-11M-PLUS Standalone Copy System V03


RSX-11M/RSX-11M-PLUS Standalone Configuration and Disk Sizing Program

Valid switches are:
        /CSR=nnnnnn to change the default device CSR
        /VEC=nnn to change the default device vector
        /FOR=n to change the default magtape formatter number
        /DEV to list all default device CSR and vectors


Enter first device: MU:

Enter second device: DU:

Hit RETURN and enter date and time as 'TIM HH:MM MM/DD/YY'
RUN BRU
>
BRU>/REW/VER MU: DU:
BRU - Starting Tape 1 on MU0:

BRU -- *WARNING* -- No bad block data file found

BRU - End of Tape 1 on MU0:

BRU - Starting verify pass Tape 1 on MU0:

BRU - End of Tape 1 on MU0:

BRU - Completed

BRU>
E11>h
R0/000000 R1/002675 R2/066000 R3/000000  CM=K PM=U PRIO=0
R4/000001 R5/000000 SP/000612 PC/001344  N=0 Z=1 V=0 C=0
001344	clrb	(r1)+
E11>bo du


  RSX-11M V4.2 BL38   124.K MAPPED
>RED DU:=SY:
>RED DU:=LB:
>MOU DU:11MKITV42
>@DU:[1,2]STARTUP
>* PLEASE ENTER TIME AND DATE (HR:MN DD-MMM-YY) [S]: 2:21 22-JUN-99
>TIM 2:21 22-JUN-99
>* ENTER LINE WIDTH OF THIS TERMINAL [D D:132.]: 80.
>SET /BUF=TI:80.
>ACS SY:/BLKS=1024.
>@ <EOF>
>SET /UIC=[200,200]
>@SYSGEN
>;
>; RSX-11M V4.2 BL38   System Generation PHASE I -- Version 3.00
>;
>; 22-JUN-99 02:21:11
>; Big disk distribution kit
>;
>*  3. Do you want to inhibit execution of MCR commands (PREPGEN)? [Y/N]: 
>INS $PIP
>INS $EDI
>INS $LBR
>INS $INI
>INS $MAC
>*  4. Have you made a copy of the distribution kit? [Y/N]: Y
>*  5. Are you generating an unmapped system? [Y/N]: 
>*  6. Use an input saved answer file? [Y/N]: 
>*  8. Do you want a Standard Function System? [Y/N]: 
>*  9. Name of output saved answer file [D: SYSSAVED.CMD] [S]: 
>;
>; Phase I output saved answers created in file DU0:[200,200]SYSSAVED.CMD;2
>;
>* 14. Clean up files from previous GENs? [Y/N]: Y
>* 15. Chain to Phase II after Phase I completes? [Y/N]: Y
>SET /UIC=[1,1]
>PIP [1,20]RSXBLD.CMD;*/DE/NM
>PIP [1,24]RSXBLD.CMD;*/DE/NM,TTDRVBLD;*
>PIP [1,50]SYSVMR.CMD;*/DE/NM,[1,54]SYSVMR;*
>PIP [11,20]*.OBJ;*/DE/NM,*.UDC;*,*.ICR;*,*.IDS;*,*.PCS;*
>PIP [11,24]*.OBJ;*/DE/NM,*.UDC;*,*.ICR;*,*.IDS;*,*.TTY;*,*.PCS;*
>PIP [11,30]*.LST;*/DE/NM,[11,34]*.LST;*
>PIP [11,10]RSXMC.MAC;*/DE/NM,ICTAB;*,[200,200]SGNPARM.CMD;*
>PIP [200,200]RSXBLD.CMD;*/DE/NM,TTDRVBLD;*
>PIP SY:[11,20]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,[12,20]MCRSETASM;*
>PIP SY:[11,24]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,[12,20]MCRSETASM;*
>PIP SY0:[11,24]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,[12,24]MCRSETASM;*
>PIP /FR

DU0: has 18934. blocks free, 41546. blocks used out of 60480.
Largest contiguous space = 18909. blocks
13757. file headers are free, 1166. headers used out of 14923.

>SET /UIC=[11,10]
>;
>; Target configuration
>;
>*  1. Processor Type  [D: 11/34]  [S]: 11/70
>*  3. Memory size (in K-word blocks) [D R:32.-1920. D:32.]: 124.
>*  4. Include support for K-series devices? [Y/N D:N]: Y
>*  6. Floating point processor (FP-11) present? [Y/N D:N]: Y
>*  8. Extended instruction set (EIS) present? [Y/N D:N]: Y
>*  9. If using KW11-P as system clock: number of intrps./sec. [D R:0.-1000. D:0
.]: 
>* 10. Line frequency:   A- 60 Hz    B- 50 Hz   [D: A] [S]: B
>* 11. KW11-Y Watchdog timer support? [Y/N D:N]: 
>* 12. Memory parity support? [Y/N D:N]: 
>;
>; The response to the following question specifies the highest interrupt
>; vector.  If you respond with a value less than or equal to 400, SYSGEN
>; will assign the value associated with the highest interrupt vector
>; specified during the Peripheral Section.  Therefore, if your system
>; will include devices that are not specified during the Peripheral
>; Section and which have vectors above 400 (devices such as K-series and
>; certain communication devices), specify that value in the next question.
>;
>* 14. Highest interrupt vector [O R:0-774 D:0]: 774
>;     For device configuration: "*" Prints device table, "." Terminates inquiry
>;                               "?" Prints current configuration
>;     Enter devices and number of controllers for devices which require drivers
>* 15. Devices [S]: NL,LP,DU,MU,CO,YL,YZ,YV.
>;
>; Processor:11/70   Memory Size:124K,Mapped   System:RSX-11M
>;
>; Host configuration
>;
>*  1. Is a line printer available? [Y/N]: 
>*  3. Does the listing/map device have at least 120 columns? [Y/N]: 
>*  4. Assembly listings device (ddu:) [D: "NL:"] [S]: 
>*  5. Map device for Executive and device drivers (ddu:) [D: SY0:] [S]: 
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>; Executive Options
>;
>;     Answer Y(ES) if the following support is desired
>;
>*  1. Include support for DBMS-11? [Y/N]: Y
>;     Files-11 ACP support will be included
>*  3. Bucket locking (file sharing) and placement control? [Y/N]: Y
>*  4. Non-resident tasks (task loader)? [Y/N]: Y
>*  5. Loadable task loader? [Y/N]: Y
>*  6. Executive Common? [Y/N]: Y
>;     Memory management directives (PLAS) support will be included
>;     Send/Receive by reference support will be included
>*  9. Get mapping context directive? [Y/N]: Y
>;     Address checking support will be included
>;     I/O rundown support will be included
>* 12. Multi-user protection? [Y/N]: Y
>* 13. ANSI Magtape ACP? [Y/N]: Y
>* 14. Do you want on-line formatting (FMT) or diagnostic QIOs? [Y/N]: Y
>* 15. Loadable device drivers? [Y/N]: Y
>* 16. Should the default for all applicable drivers be loadable? [Y/N]: Y
>;     AST support will be included
>;     Cancel selective marktime support will be included
>* 19. Task termination and device not ready messages (TKTN)? [Y/N]: Y
>* 20. Power fail recovery? [Y/N]: 
>* 21. Install, request, and remove on exit? [Y/N]: Y
>* 22. Large (20K) Executive? [Y/N]: Y
>* 23. Logical device assignment? [Y/N]: Y
>* 24. Include support for error logging? [Y/N]: Y
>* 25. Do you intend to include a user-written driver? [Y/N]: 
>* 28. Disk writecheck? [Y/N]: Y
>* 29. Software write-lock? [Y/N]: Y
>* 30. Executive Debugging Tool (XDT)? [Y/N]: Y
>* 31. Rotating pattern in data lights? [Y/N]: 
>* 32. Include support for communications products (such as DECnet)? [Y/N]: 
>;     System controlled partition support will be included
>* 34. Include support for the Shuffler? [Y/N]: Y
>* 35. Queue manager and queued print spooler? [Y/N]: Y
>* 36. Group global event flags? [Y/N]: Y
>;
>;     For directives:
>;
>;     * - Prints the table
>;     . - Terminates inquiry
>;     % - Gets all valid directives and terminates inquiry
>;
>* 37. Enter code for system directives [S]: %
>;     Checkpointing support will be included
>* 38. Number of pre-allocated QIO packets [D R:0.-15. D:5.]: 
>* 39. Size of data transfer vector in words [D R:0.-33. D:33.]: 
>* 40. Round-robin scheduling interval in ticks [D R:0.-1000. D:5.]: 
>* 41. Highest priority class for consideration [D R:1.-249. D:150.]: 
>* 42. Lowest priority class for consideration [D R:1.-150. D:1.]: 
>* 43. Executive level disk swapping interval [D R:0.-5000. D:30.]: 
>* 44. Swapping priority [D R:1.-20. D:5.]: 
>* 46. Seconds between printer not ready messages [D R:0.-255. D:30.]: 120.
>* 48. System crash register and stack dump device CSR [O R:0-177700 D:177564]: 
>* 50. Checkpointing with system checkpoint file? [Y/N]: Y
>* 51. Crash dump analysis:  A- PANIC  B- Crash Dump Analysis (CDA)  C- None  [D
:  B] [S]: 
>* 52. CDA output notification device CSR [O R:160000-177700 D:177564]: 
>* 53. Enter CDA memory dump device mnemonic (ddu:) [S R:3-4]: MU0:
>* 54. Enter CDA memory dump device CSR [O R:160000-177700 D:174500]: 
>* 56. RT-11 emulation support? [Y/N]: 
>;
>* EOS *  Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>;
>; Terminal driver options
>;      The Full Duplex Terminal Driver will be included.
>*  2. Unsolicited input timeout value in seconds [D R:0.-255. D:120.]: 
>;
>;     Answer Y(ES) if the following support is desired
>;
>*  6. Unsolicited input character AST? [Y/N]: Y
>;     Breakthrough write support will be included
>;     CTRL/R support will be included
>* 10. Escape sequence handling? [Y/N]: Y
>* 11. Get multiple characteristics? [Y/N]: Y
>* 12. Set multiple characteristics? [Y/N]: Y
>* 13. Get terminal driver options? [Y/N]: Y
>* 17. Read after prompt? [Y/N]: Y
>* 20. CRT rubout support? [Y/N]: Y
>* 25. Hardware unrecoverable input error notification? [Y/N]: Y
>* 26. Device independent cursor positioning? [Y/N]: Y
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>;
>; System Options
>;
>;
>;     Answer Y(ES) if the following support is desired
>;
>*  2A. Include support for the IP11 Industrial I/O Subsystem? [Y/N]: 
>*  3. Build the PLAS resident FCS? [Y/N]: Y
>*  4. Code for FCP (A/B/C/D/E, * prints table) [D: C] [S]: D
>*  5. Build Post Mortem Dump (PMD)? [Y/N]: Y
>*  6. Build the Resource Monitoring Display task (RMD)? [Y/N]: Y
>*  8. Do you want DIGITAL Command Language (DCL)? [Y/N]: Y
>*  9. Enter the number of user-written CLIs [D R:0.-14. D:0.]: 2
>* 10. Do you want pool monitoring and low pool recovery (PMT)? [Y/N]: Y
>* 11. What name would you like to give your system [D: RSX11M] [S R:0-6]: 
>* 12. Do you want SPM-11 support? [Y/N]: 
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>;     Thinking ...
>; End of Executive option generation at 02:25:24 on 22-JUN-99
>;
>; Peripheral configuration
>;
>;     Parameters  appearing  in  square  brackets  "[...]"  can  only be
>;     specified  for  the  first  controller  of  a  particular  device.
>;     Parameters appearing in parentheses "(...)" only need be specified
>;     if   the  indicated  option  is  present  on  the  target  system.
>;    
>;     The   default  for  loadable  drivers  has  been  set  to  *TRUE*.
>;     To override this setting enter R (resident) as the first parameter
>;     for    the    first    controller   of   the   specified   device.
>;    
>; A/D and Laboratory devices: None specified
>;
>; Interprocessor communication devices: None specified
>;
>; Unit record devices: LP
>;
>; Enter [L/R,] vector, CSR, printer option
>;              (,[KMC timeout count <0=no KMC>, KMC vector, KMC CSR]) for:
>;
>* 16. LP controller 0 [D: 200,177514,LA180,0,300,160130] [S]: 
>;
>; Disks: DU
>;
>; Enter vector, CSR, number of drives for:
>;
>*  3. DU controller 0 [D: 154,172150]              [S]: ,,4
>;
>; Tapes: MU
>;
>; Enter vector, CSR for: 
>;
>*  1. MU controller 0 [D: 260,174500]              [S]: 
>;
>; Non-physical (pseudo) devices: CO, NL, TI, CL, LB, SY
>;
>; Terminal interface devices: YL, YV, YZ
>;
>; Enter vector, CSR, E=DL11-E modem support/NO=no for:
>;
>* 21. YL controller 0 [D: 60,177560,NO]            [S]: 
>;
>; Enter vector, CSR, highest line number <0 to 15> [, answer speed] for:
>;
>* 26. YV controller 0 [D: ,160440,,300]            [S]: 340,160500,15,9600
>;
>; Enter vector, CSR, highest line number <0 to 7> [, answer speed] for:
>;
>* 24. YZ controller 0 [D: ,160100,,300]            [S]: 300,160100,7,9600
>SET /UIC=[1,24] ! Creating TTDRVBLD.CMD
>SET /UIC=[11,10]
>;
>* EOS *  Do you want to: <CR>-continue E-exit P-pause [S]: 
>;
>;
>; End of interrupt vector area has been set to 1000
>;
>;
>; Create Executive build files
>;
>PIP RSXMC.MAC=SY0:RSXMC0.MAC/AP
>;
>*  1. Do you wish to edit any of the Executive files? [Y/N]: 
>;
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>ASN SY:=LB:
>;
>; Start of Executive assembly at 02:26:44 on 22-JUN-99
>SET /UIC=[11,24]
>MAC @SY:RSXASM
>;
>; End of Executive assembly at 02:26:53 on 22-JUN-99
>;
>* EOX * Did the Executive assemble correctly? [Y/N]: Y
>;
>;
>; Start of MCR (subset) assembly at 02:28:01 on 22-JUN-99
>SET /UIC=[12,24]
>PIP *.OBJ;*/DE/NM
>MAC @SY:MCRSETASM
>;
>; End of MCR (subset) assembly at 02:28:03 on 22-JUN-99
>;
>* EOX * Did MCR (subset) assemble correctly? [Y/N]: Y
>;
>;
>;
>; Start of device drivers assembly at 02:28:09 on 22-JUN-99
>SET /UIC=[11,24]
>MAC @SY:RSXDRVASM
>;
>; End of device drivers assembly at 02:28:18 on 22-JUN-99
>;
>* EOX * Did the device drivers assemble correctly? [Y/N]: Y
>;
>ASN =LB:
>;
>; Prepare for task building
>;
>SET /UIC=[1,24]
>PIP RSX11M.OBS=[11,24]*.OBJ
>PIP TTDRV.OBJ=[11,24]*.TTY
>LBR RSX11M/CR:100.:1010.:128.=RSX11M.OBS
>LBR TTDRV/CR:30.:380.:64.=TTDRV
>PIP [1,24]MCR.OBJ/NV/NM=[12,24]*.OBJ
>PIP [12,24]*.OBJ;*/DE/NM
>PIP /NV=[11,10]RSXBLD.CMD
>PIP [11,10]RSXBLD.CMD;*/DE/NM
>;
>* EOX  Were the task build preparations made successfully? [Y/N]: Y
>;
>REM LBR
>;
>; Clean-up extraneous object files
>;
>PIP RSX11M.OBS;*/DE/NM,TTDRV.OBJ;*,[11,24]*.OBJ;*,*.TTY;*
>;
>* EOS * Do you want to: <CR>-continue R-repeat section P-pause [S]: 
>REM MAC
>REM INI
>REM PIP
>REM EDI
>;
>; End of SYSGEN phase I at 02:28:30 on 22-JUN-99
>;      -- Chaining to [200,200]SYSGEN2.CMD
>;
>SET /UIC=[200,200]
>;
>; RSX-11M V4.2 BL38  System Generation PHASE II -- Version 2.11
>;
>; 22-JUN-99 02:28:30
>;
>;
>; Big disk distribution kit SYSGEN version 3.00 for RSX-11M BL38  
>;
>; Continuation from SYSGEN PHASE I done on 22-JUN-99 at 02:28:27
>;
>; SYSGEN assumes that the map disk is already mounted in SY0: with
>; UFD [1,34].
>;
>;
>INS $PIP
>INS $EDI
>INS $LBR
>INS SY:[1,54]TKB.TSK;1/TASK=...TKL
>;
>; Phase II output saved answers created in file DU0:[200,200]SYSSAVED.CMD;2
>;
>ASN SY:=LB:
>PIP /FR

DU0: has 18526. blocks free, 41954. blocks used out of 60480.
Largest contiguous space = 17999. blocks
13746. file headers are free, 1177. headers used out of 14923.

>;
>; Start of library build at 02:28:30 on 22-JUN-99
>;
>SET /UIC=[1,1]
>PIP LB:ANSLIB.OLB/NV=LB:SYSLIB.OLB
>LBR LB:ANSLIB/RP=SY0:FCSMTA
Module "ANSPAD" replaced

Module "ASSLUN" replaced

Module "BIGBUF" replaced

Module "CLOSE " replaced

Module "CONTRL" replaced

Module "CREATE" replaced

Module "DIRECT" replaced

Module "FCSTYP" replaced

Module "GET   " replaced

Module "GETSQ " replaced

Module "OPEN  " replaced

Module "OPENR " replaced

Module "OPFID " replaced

Module "OPFNB " replaced

Module "PARSFN" replaced

Module "POINT " replaced

Module "PUT   " replaced

Module "PUTSQ " replaced

Module "RDWAIT" replaced

Module "RETADR" replaced

Module "RSTFDB" replaced

Module "RWBLK " replaced

Module "RWLONG" replaced

Module "WATSET" replaced

Module "WTWAIT" replaced

Module "WTWATD" replaced

>SET /UIC=[1,24]
>LBR SY0:MCR/RP=SY0:MCR.OBJ
Module "DV2OV " replaced

Module "SPSOV " replaced

Module "STSUB " replaced

Module "SX1OV " replaced

Module "SX2OV " replaced

Module "SX3OV " replaced

Module "SX4OV " replaced

Module "ST5OV " replaced

>;
>; End of library build at 02:28:31 on 22-JUN-99
>;
>;
>* EOX * Did the libraries build sucessfully? [Y/N]: Y
>;
>;
>; Start of Executive task build at 02:28:33 on 22-JUN-99
>;
>*  1. List Executive map? [Y/N]: 
>PIP [1,34]*.*;*/DE/NM
>TKL @LB:RSXBLD
>;
>; End of Executive task build at 02:28:36 on 22-JUN-99
>;
>;
>* EOX * Did the Executive build successfully? [Y/N]: Y
>;
>;
>; Start of system image creation at 02:28:38 on 22-JUN-99
>;
>SET /UIC=[1,54]
>PIP RSX11M.SYS/CO/NV/BL:498.=RSX11M.TSK
>;
>; End of system image creation at 02:28:38 on 22-JUN-99
>;
>;
>* EOX * Was the system image created correctly? [Y/N]: Y
>;
>;
>; Start of full duplex terminal driver task build at 02:28:40 on 22-JUN-99
>;
>SET /UIC=[1,24]
>TKL @LB:TTDRVBLD
>;
>; End of full duplex terminal driver task build at 02:28:40 on 22-JUN-99
>;
>;
>* EOX * Did the terminal driver build successfully? [Y/N]: Y
>;
>;
>; Start of loadable driver task build at 02:28:42 on 22-JUN-99
>;
>*  4. Build all selected loadable drivers into DRVPAR? [Y/N]: Y
>TKL @SY0:CODRVBLD
>TKL @SY0:DUDRVBLD
>TKL @SY0:MUDRVBLD
>TKL @SY0:LPDRVBLD
>;
>; End of loadable driver task build at 02:28:44 on 22-JUN-99
>;
>;
>* EOX * Did the loadable drivers task build sucessfully? [Y/N]: Y
>;
>;
>; Start of common block task build at 02:28:47 on 22-JUN-99
>;
>; Build the ANSLIB flavor of the FCS resident library common
>;
>;
>; Creating the task build .CMD and .ODL files in SY:[1,24]
>;
>TKL @SY:[1,24]FCSRS1BLD.CMD
>;
>; End of common block task build at 02:28:47 on 22-JUN-99
>;
>;
>* EOX * Did the common(s) build successfully? [Y/N]: Y
>;
>;
>; Start of privileged task build at 02:28:49 on 22-JUN-99
>;
>;
>;      Note that the following tasks will be built for your system:
>;
>;       BOO    DMO     COT     FCPLRG  ICP     INI     INS     
>;       PMT    MCR     DCL     MOU     QMG     QMGCLI  QMGPRT  
>;       LPP    F11MSG  MTAACP  SAV     TKTN    UFD     LOA     
>;       UNL    PMD     RMD     SHF     ACNT    BYE     HEL     
>;       BRO    SHUTUP  ACS     ERRLOG  ELI     RCT     
>;
>;
>*  1. Map device for privileged tasks (ddu:) [D:  NL:] [S]: 
>*  5. Pause to edit any task build .CMD or .ODL files? [Y/N]: 
>*  6. Delete task build .CMD and .ODL files after building? [Y/N]: Y
>;
>;
>; It is assumed that [1,1]FCSRES.STB is an ANSLIB version of the FCS
>; resident library
>;
>;
>; Creating the task build .CMD and .ODL files in SY:[1,24]
>;
>TKL @SY:[1,24]BOOBLD.CMD
>TKL @SY:[1,24]DMOBLD.CMD
>TKL @SY:[1,24]COTRESBLD.CMD
>TKL @SY:[1,24]FCPLRGBLD.CMD
>TKL @SY:[1,24]ICPBLD.CMD
>TKL @SY:[1,24]INIBLD.CMD
>TKL @SY:[1,24]INSBLD.CMD
>TKL @SY:[1,24]PMTBLD.CMD
>TKL @SY:[1,24]MCMBLD.CMD
>TKL @SY:[1,24]DCLBLD.CMD
>TKL @SY:[1,24]MOUBLD.CMD
>TKL @SY:[1,24]QMGRESBLD.CMD
>TKL @SY:[1,24]QCLRESBLD.CMD
>TKL @SY:[1,24]QPRBLD.CMD
>TKL @SY:[1,24]LPPRESBLD.CMD
>TKL @SY:[1,24]F11MSGBLD.CMD
>TKL @SY:[1,24]MTABLD.CMD
>TKL @SY:[1,24]SAVBLD.CMD
>TKL @SY:[1,24]TKNBLD.CMD
>TKL @SY:[1,24]UFDBLD.CMD
>TKL @SY:[1,24]LOABLD.CMD
>TKL @SY:[1,24]UNLRESBLD.CMD
>TKL @SY:[1,24]PMDRESBLD.CMD
>TKL @SY:[1,24]RMDBLD.CMD
>TKL @SY:[1,24]SHFBLD.CMD
>TKL @SY:[1,24]ACNRESBLD.CMD
>TKL @SY:[1,24]BYEBLD.CMD
>TKL @SY:[1,24]HELRESBLD.CMD
>TKL @SY:[1,24]BROBLD.CMD
>TKL @SY:[1,24]SHUBLD.CMD
>TKL @SY:[1,24]ACSRESBLD.CMD
>TKL @SY:[1,24]ERLBLD.CMD
>TKL @SY:[1,24]ELIRESBLD.CMD
>TKL @SY:[1,24]RCTBLD.CMD
>;
>; End of privileged task build at 02:29:13 on 22-JUN-99
>;
>;
>* EOX * Did the privileged tasks build successfully? [Y/N]: Y
>;
>;
>; Delete the task build .CMD and .ODL files
>;
>PIP SY:[1,24]BOOBLD.CMD;0/DE/NM,BOOBLD.ODL;0
>PIP SY:[1,24]DMOBLD.CMD;0/DE/NM,DMOBLD.ODL;0
>PIP SY:[1,24]COTRESBLD.CMD;0/DE/NM,COTRESBLD.ODL;0
>PIP SY:[1,24]FCPLRGBLD.CMD;0/DE/NM,FCPLRGBLD.ODL;0
>PIP SY:[1,24]ICPBLD.CMD;0/DE/NM,ICPBLD.ODL;0
>PIP SY:[1,24]INIBLD.CMD;0/DE/NM,INIBLD.ODL;0
>PIP SY:[1,24]INSBLD.CMD;0/DE/NM,INSBLD.ODL;0
>PIP SY:[1,24]PMTBLD.CMD;0/DE/NM,PMTBLD.ODL;0
>PIP SY:[1,24]MCMBLD.CMD;0/DE/NM,MCMBLD.ODL;0
>PIP SY:[1,24]DCLBLD.CMD;0/DE/NM,DCLBLD.ODL;0
>PIP SY:[1,24]MOUBLD.CMD;0/DE/NM,MOUBLD.ODL;0
>PIP SY:[1,24]QMGRESBLD.CMD;0/DE/NM,QMGRESBLD.ODL;0
>PIP SY:[1,24]QCLRESBLD.CMD;0/DE/NM,QCLRESBLD.ODL;0
>PIP SY:[1,24]QPRBLD.CMD;0/DE/NM,QPRBLD.ODL;0
>PIP SY:[1,24]LPPRESBLD.CMD;0/DE/NM,LPPRESBLD.ODL;0
>PIP SY:[1,24]F11MSGBLD.CMD;0/DE/NM,F11MSGBLD.ODL;0
>PIP SY:[1,24]MTABLD.CMD;0/DE/NM,MTABLD.ODL;0
>PIP SY:[1,24]SAVBLD.CMD;0/DE/NM,SAVBLD.ODL;0
>PIP SY:[1,24]TKNBLD.CMD;0/DE/NM,TKNBLD.ODL;0
>PIP SY:[1,24]UFDBLD.CMD;0/DE/NM,UFDBLD.ODL;0
>PIP SY:[1,24]LOABLD.CMD;0/DE/NM,LOABLD.ODL;0
>PIP SY:[1,24]UNLRESBLD.CMD;0/DE/NM,UNLRESBLD.ODL;0
>PIP SY:[1,24]PMDRESBLD.CMD;0/DE/NM,PMDRESBLD.ODL;0
>PIP SY:[1,24]RMDBLD.CMD;0/DE/NM,RMDBLD.ODL;0
>PIP SY:[1,24]SHFBLD.CMD;0/DE/NM,SHFBLD.ODL;0
>PIP SY:[1,24]ACNRESBLD.CMD;0/DE/NM,ACNRESBLD.ODL;0
>PIP SY:[1,24]BYEBLD.CMD;0/DE/NM,BYEBLD.ODL;0
>PIP SY:[1,24]HELRESBLD.CMD;0/DE/NM,HELRESBLD.ODL;0
>PIP SY:[1,24]BROBLD.CMD;0/DE/NM,BROBLD.ODL;0
>PIP SY:[1,24]SHUBLD.CMD;0/DE/NM,SHUBLD.ODL;0
>PIP SY:[1,24]ACSRESBLD.CMD;0/DE/NM,ACSRESBLD.ODL;0
>PIP SY:[1,24]ERLBLD.CMD;0/DE/NM,ERLBLD.ODL;0
>PIP SY:[1,24]ELIRESBLD.CMD;0/DE/NM,ELIRESBLD.ODL;0
>PIP SY:[1,24]RCTBLD.CMD;0/DE/NM,RCTBLD.ODL;0
>;
>; Start of system VMR at 02:30:18 on 22-JUN-99
>;
>SET /UIC=[1,54]
>*  1. Edit SYSVMR.CMD? [Y/N]: 
>;
>;
>; You will have to run VMR after the command file exits
>; since we don't know what is the real system volume.
>;
>; End of system VMR at 02:30:20 on 22-JUN-99
>;
>;
>; An alternate version of SYSLIB.OLB, the system object library, was
>; created to provide support for ANSI magtape/FCS big-buffering (which
>; you selected in Phase I).  You may want to rebuild DMP, FLX, PIP, and 
>; VFY in Phase III to use ANSLIB.OLB.  Note, however, building tasks with
>; ANSLIB.OLB causes an increase in the size of tasks as compared to the
>; SYSLIB.OLB version of the tasks.
>;
>; A memory resident library of FCS routines (which you selected in Phase I)
>; was built to help reduce task memory requirements.  You may want to rebuild
>; tasks in Phase III to link to the FCS resident library.
>; 
>; When SYSGEN finishes, boot in your target system, and save the system with a
>; bootstrap.  For example:
>;
>;     >BOO [1,54]RSX11M
>;     XDT: 38 
>;
>;     XDT>G
>;      RSX11M V4.2 BL38 
>;
>;
>;      >TIM 12:00 14-JUN-85
>;     >SAV /WB
>; 
>;      RSX11M V4.2 BL38        124.K   MAPPED
>;     >RED DU:=SY:
>;     >RED DU:=LB:
>;     >MOU DU:RSXM38
>;     >@DU:[1,2]STARTUP
>;     .
>;     .
>;     .
>;
>REM PIP
>REM EDI
>REM LBR
>REM TKL
>;
>; End of SYSGEN phase II at 02:30:20 on 22-JUN-99
>;
>SET /UIC=[200,200]
>@ <EOF>
>SET /UIC=[1,54]
>INS $VMR
>VMR @SYSVMR
VMR -- *DIAG*-Partition reduced to executive common size
INS EXCOM1
VMR -- *DIAG*-Partition reduced to executive common size
INS EXCOM2
VMR -- *DIAG*-Loadable driver larger than 4K
LOA TT:
VMR -- *DIAG*-Installed tasks may no longer fit in partition
SET /TOP=DRVPAR:-*
POOL=1200:9168.:09168.
EXCOM1 117734 120000 014600 MAIN COM
EXCOM2 117670 134600 010200 MAIN COM
LDRPAR 117624 145000 002600 MAIN TASK
TTPAR  117260 147600 040000 MAIN TASK
DRVPAR 116604 207600 020600 MAIN SYS 
       116540 207600 007200 SUB  DRIVER - MU:
       116440 217000 010000 SUB  DRIVER - DU:
       116340 227000 001100 SUB  DRIVER - LP:
       116240 230100 000300 SUB  DRIVER - CO:
SYSPAR 116174 230400 011700 MAIN TASK
PUCOM  116130 242300 007500 MAIN COM
FCSRES 116064 252000 040000 MAIN COM
FCPPAR 116020 312000 044200 MAIN SYS 
GEN    115754 356200 401600 MAIN SYS 
LDR... 13.02  117510 LDRPAR 248. 002600 LB0:-00123013 FIXED
TKTN   05.00  111270 SYSPAR 248. 011700 LB0:-00124504
...RMD 03.00  114614 GEN    225. 027200 LB0:-00127312
F11MSG 13.00  113704 GEN    200. 005700 LB0:-00125553
MTAACP 15.00  113570 GEN    200. 014700 LB0:-00127127
...DMO 04.00  114250 GEN    160. 014600 LB0:-00124560
MCR... 05.00  112544 SYSPAR 160. 011700 LB0:-00125407
...DCL 4.2    112430 GEN    160. 051500 LB0:-00126001
...MOU 27.00  111750 GEN    160. 037700 LB0:-00125435
...MCR 03.00  111404 GEN    160. 020000 LB0:-00125601
F11ACP 05.00  115640 FCPPAR 149. 044200 LB0:-00124701
ERRLOG 2.00   114134 GEN    148. 040000 LB0:-00127763
PMT... 2.00   113110 GEN    148. 006300 LB0:-00125050
COT... 2.0    115524 GEN    145. 013600 LB0:-00124604
PMD... 08.00  112774 GEN    140. 016200 LB0:-00127101
SHF... 6.00   111520 SYSPAR 105. 011700 LB0:-00127452
...INS 9.00   113224 GEN    100. 034600 LB0:-00125336
...SAV 05.00  111634 GEN    100. 033200 LB0:-00127017
...UFD 05.00  111154 GEN    100. 005700 LB0:-00125565
RCT... 05.00  110724 GEN    100. 010700 LB0:-00130051
QMG... 03.03  115410 GEN     75. 031700 LB0:-00125513
PRT... 2.0    115044 GEN     70. 001100 LB0:-00125547
LP0    04.01  114730 GEN     70. 014600 LB0:-00126715
...ACS 3.00   114500 GEN     70. 005000 LB0:-00127754
...AT. 8.0    113340 GEN     64. 060000 LB0:-00125142
...QUE 05.00  115274 GEN     50. 020100 LB0:-00126522
...PRI 05.00  115160 GEN     50. 020100 LB0:-00126522
...BOO 06.02  114364 GEN     50. 021700 LB0:-00124517
...ELI 1.00   114020 GEN     50. 017300 LB0:-00130027
...MAG 03.00  113454 GEN     50. 031500 LB0:-00124436
...LOA 04.02  112660 GEN     50. 032600 LB0:-00127255
...HEL 03.00  112314 GEN     50. 024000 LB0:-00127631
...BYE 06.00  112200 GEN     50. 012500 LB0:-00127570
...BRO 06.00  112064 GEN     50. 030400 LB0:-00127675
...UNL 4.02   111040 GEN     50. 024500 LB0:-00126664
LP0:    Loaded
DU0:    Loaded
DU1:    Loaded
DU2:    Loaded
DU3:    Loaded
MU0:    Loaded
CO0:  TT0:
TT0:    Loaded
TT1:    Loaded
TT2:    Loaded
TT3:    Loaded
TT4:    Loaded
TT5:    Loaded
TT6:    Loaded
TT7:    Loaded
TT10:    Loaded
TT11:    Loaded
TT12:    Loaded
TT13:    Loaded
TT14:    Loaded
TT15:    Loaded
TT16:    Loaded
TT17:    Loaded
TT20:    Loaded
TT21:    Loaded
TT22:    Loaded
TT23:    Loaded
TT24:    Loaded
TT25:    Loaded
TT26:    Loaded
TT27:    Loaded
TT30:    Loaded
NL0:  
TI0:  
CL0:  TT0:
LB0:  DU0:
SY0:  DU0:
>BOO [1,54]
XDT: 38  

XDT>g
RSX11M V4.2 BL38  


 DEVICE LP00: NOT IN CONFIGURATION
 DEVICE TT01: NOT IN CONFIGURATION
 DEVICE TT02: NOT IN CONFIGURATION
 DEVICE TT03: NOT IN CONFIGURATION
 DEVICE TT04: NOT IN CONFIGURATION
 DEVICE TT05: NOT IN CONFIGURATION
 DEVICE TT06: NOT IN CONFIGURATION
 DEVICE TT07: NOT IN CONFIGURATION
 DEVICE TT10: NOT IN CONFIGURATION
 DEVICE TT11: NOT IN CONFIGURATION
 DEVICE TT12: NOT IN CONFIGURATION
 DEVICE TT13: NOT IN CONFIGURATION
 DEVICE TT14: NOT IN CONFIGURATION
 DEVICE TT15: NOT IN CONFIGURATION
 DEVICE TT16: NOT IN CONFIGURATION
 DEVICE TT17: NOT IN CONFIGURATION
 DEVICE TT20: NOT IN CONFIGURATION
 DEVICE TT21: NOT IN CONFIGURATION
 DEVICE TT22: NOT IN CONFIGURATION
 DEVICE TT23: NOT IN CONFIGURATION
 DEVICE TT24: NOT IN CONFIGURATION
 DEVICE TT25: NOT IN CONFIGURATION
 DEVICE TT26: NOT IN CONFIGURATION
 DEVICE TT27: NOT IN CONFIGURATION
 DEVICE TT30: NOT IN CONFIGURATION
>
SAV /WB

  RSX-11M V4.2 BL38   124.K MAPPED
>RED DU:=SY:
>RED DU:=LB:
>MOU DU:11MKITV42
>@DU:[1,2]STARTUP
>* PLEASE ENTER TIME AND DATE (HR:MN DD-MMM-YY) [S]:
