>INS $TKB/TASK=...TKL
>@SYSGEN
>;
>; RSX-11M V4.8 BL70   System Generation PHASE I -- Version 06.03
>;
>; 26-JUL-17 18:53:52
>; RK06/RK07 distribution kit
>;
>*  3. Do you want to inhibit execution of MCR commands (PREPGEN)? [Y/N]: 
>*  4. Have you made a copy of the distribution kit? [Y/N]: Y
>*  5. Are you generating an unmapped system? [Y/N]: Y
>*  6. Use an input saved answer file? [Y/N]: 
>*  9. Name of output saved answer file [D: SYSSAVED.CMD] [S]: SYSUNMAP
>;
>; Phase I output saved answers created in file DM1:[200,200]SYSUNMAP.CMD;2
>;
>* 14. Clean up files from previous GENs? [Y/N]: Y
>* 15. Chain to Phase II after Phase I completes? [Y/N]: 
>SET /UIC=[1,1]
>PIP [1,20]RSXBLD.CMD;*/DE/NM
>PIP [1,24]RSXBLD.CMD;*/DE/NM,TTDRVBLD;*
>PIP [1,50]SYSVMR.CMD;*/DE/NM,[1,54]SYSVMR;*
>PIP [11,20]*.OBJ;*/DE/NM,*.UDC;*,*.ICR;*,*.IDS;*,*.PCS;*
>PIP [11,24]*.OBJ;*/DE/NM,*.UDC;*,*.ICR;*,*.IDS;*,*.TTY;*,*.PCS;*
>PIP [11,30]*.LST;*/DE/NM,[11,34]*.LST;*
>PIP [11,10]RSXMC.MAC;*/DE/NM,ICTAB;*,[200,200]SGNPARM.CMD;*
>PIP [200,200]RSXBLD.CMD;*/DE/NM,TTDRVBLD;*
>PIP SY:[11,20]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,[12,20]MCRSETASM;*
>PIP SY:[11,24]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,[12,20]MCRSETASM;*
>PIP SY0:[11,24]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,[12,24]MCRSETASM;*
>PIP /FR

DM1: has 7249. blocks free, 46541. blocks used out of 53790.
Largest contiguous space = 4285. blocks
1804. file headers are free, 1504. headers used out of 3308.

>SET /UIC=[11,10]
>;
>; Target configuration
>;
>*  1. Processor Type  [D: 11/34]  [S]: 
>*  2. Does processor have a switch register? [Y/N D:N]: Y
>*  3. Memory size (in K-word blocks) [D R:16.-30. D:16.]: 28
>; If you specified 128 kw or more this system will only run on 22 bit systems.
>*  4. Include support for K-series devices? [Y/N D:N]: 
>*  5. Extended arithmetic element (KE11-A/B EAE) present? [Y/N D:N]: 
>*  6. Floating point processor (FP-11) present? [Y/N D:N]: Y
>*  8. Extended instruction set (EIS) present? [Y/N D:N]: Y
>*  9. If using KW11-P as system clock: number of intrps./sec. [D R:0.-1000. D:0
.]: 
>* 10. Line frequency:   A- 60 Hz    B- 50 Hz   [D: A] [S]: B
>* 11. KW11-Y Watchdog timer support? [Y/N D:N]: 
>* 12. Memory parity support? [Y/N D:N]: 
>;
>; The response to the following question specifies the highest interrupt
>; vector.  If you respond with a value less than or equal to 400, SYSGEN
>; will assign the value associated with the highest interrupt vector
>; specified during the Peripheral Section.  Therefore, if your system
>; will include devices that are not specified during the Peripheral
>; Section and which have vectors above 400 (devices such as K-series and
>; certain communication devices), specify that value in the next question.
>;
>* 14. Highest interrupt vector [O R:0-774 D:0]: 374
>;     For device configuration: "*" Prints device table, "." Terminates inquiry
>;                               "?" Prints current configuration
>;     Enter devices and number of controllers for devices which require drivers
>* 15. Devices [S]: NL,LP,MT,DM,YL=2.
>;
>; Processor:11/34   Memory Size:28K,Unmapped   System:RSX-11M
>;
>; Host configuration
>;
>*  1. Is a line printer available? [Y/N]: Y
>*  2. Spool assembly listings and Executive and driver maps? [Y/N]: 
>*  3. Does the listing/map device have at least 120 columns? [Y/N]: Y
>*  4. Assembly listings device (ddu:) [D: "NL:"] [S]: 
>*  5. Map device for Executive and device drivers (ddu:) [D: SY0:] [S]: 
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>; Executive Options
>;
>;     Answer Y(ES) if the following support is desired
>;
>*  2. FILES-11 ACP ? [Y/N]: Y
>*  3. Bucket locking (file sharing) and placement control? [Y/N]: 
>*  4. Non-resident tasks (task loader)? [Y/N]: Y
>* 10. Address checking? [Y/N]: 
>* 11. I/O rundown? [Y/N]: Y
>* 12. Multi-user protection? [Y/N]: 
>* 13. ANSI Magtape ACP? [Y/N]: Y
>* 14. Do you want on-line formatting (FMT) or diagnostic QIOs? [Y/N]: 
>* 15. Loadable device drivers? [Y/N]: 
>;     AST support will be included
>* 18. Include support for Cancel Selective Marktime? [Y/N]: Y
>* 19. Task termination and device not ready messages (TKTN)? [Y/N]: Y
>* 20. Power fail recovery? [Y/N]: 
>* 21. Install, request, and remove on exit? [Y/N]: 
>* 23. Logical device assignment? [Y/N]: Y
>* 24. Include support for error logging? [Y/N]: 
>* 25. Do you intend to include a user-written driver? [Y/N]: 
>* 28. Disk writecheck? [Y/N]: 
>* 29. Software write-lock? [Y/N]: 
>* 30. Executive Debugging Tool (XDT)? [Y/N]: 
>* 32. Include support for communications products (such as DECnet)? [Y/N]: 
>* 36. Group global event flags? [Y/N]: 
>;
>;     For directives:
>;
>;     * - Prints the table
>;     . - Terminates inquiry
>;     % - Gets all valid directives and terminates inquiry
>;
>* 37. Enter code for system directives [S]: %
>;     Checkpointing support will be included
>* 38. Number of pre-allocated QIO packets [D R:0.-15. D:5.]: 
>* 40. Round-robin scheduling interval in ticks [D R:0.-1000. D:5.]: 
>* 41. Highest priority class for consideration [D R:1.-249. D:150.]: 
>* 42. Lowest priority class for consideration [D R:1.-150. D:1.]: 
>* 43. Executive level disk swapping interval [D R:0.-5000. D:30.]: 
>* 44. Swapping priority [D R:1.-20. D:5.]: 
>* 45. Size of dynamic storage region (POOL) in words [D R:256.-16384. D:1024.]:
 
>* 46. Seconds between printer not ready messages [D R:0.-255. D:30.]: 
>* 48. System crash register and stack dump device CSR [O R:0-177700 D:177564]: 
>* 51. Crash dump analysis:  A- PANIC  B- Crash Dump Analysis (CDA)  C- None  [D
:  B] [S]: A
>* 55. Enter PANIC memory dump device CSR [O R:160000-177700 D:177564]: 
>;
>* EOS *  Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>;
>; Terminal driver options
>;
>*  1. Terminal driver desired (A/B/C/D, * prints table) [S]: A
>;
>;     Answer Y(ES) if the following support is desired
>;
>*  3. Pass form feeds directly to terminal? [Y/N]: 
>*  4. Automatic carriage return/line feed? [Y/N]: 
>*  5. Task checkpointable during terminal input? [Y/N]: Y
>*  6. Unsolicited input character AST? [Y/N]: Y
>*  7. Write with CTRL/O cancellation? [Y/N]: Y
>*  8. Breakthrough write? [Y/N]: Y
>;     CTRL/R support will be included
>* 10. Escape sequence handling? [Y/N]: 
>* 11. Get multiple characteristics? [Y/N]: Y
>* 12. Set multiple characteristics? [Y/N]: Y
>* 13. Get terminal driver options? [Y/N]: Y
>* 14. Hold screen mode? [Y/N]: 
>* 15. Transparent read/write? [Y/N]: Y
>* 16. Settable case conversion for input? [Y/N]: Y
>* 17. Read after prompt? [Y/N]: Y
>* 18. Read with no echo? [Y/N]: Y
>* 19. Read with special terminator? [Y/N]: Y
>* 20. CRT rubout support? [Y/N]: Y
>* 21. Terminal-host synchronization? [Y/N]: Y
>* 22. User terminal input buffering? [Y/N]: Y
>* 23. Variable length terminal input buffering? [Y/N]: Y
>* 24. LA30P support? [Y/N]: 
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>;
>; System Options
>;
>;
>;     Answer Y(ES) if the following support is desired
>;
>* 2A. Include support for the IP11 Industrial I/O Subsystem? [Y/N]: 
>*  4. Code for FCP (A/B/C/D/E, * prints table) [D: B] [S]: 
>*  5. Build Post Mortem Dump (PMD)? [Y/N]: Y
>*  6. Build the Resource Monitoring Display task (RMD)? [Y/N]: Y
>*  7. Build the non-queue manager print spooler (PRT)? [Y/N]: 
>* 11. What name would you like to give your system [D: RSX11M] [S R:0-6]: 
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>;     Thinking ...
>; End of Executive option generation at 18:58:05 on 26-JUL-17
>;
>; Peripheral configuration
>;
>;     Parameters  appearing  in  square  brackets  "[...]"  can  only be
>;     specified  for  the  first  controller  of  a  particular  device.
>;     Parameters appearing in parentheses "(...)" only need be specified
>;     if   the  indicated  option  is  present  on  the  target  system.
>;    
>;     Loadable  device  driver  support  was not requested in the Executive
>;     portion of SYSGEN.  Therefore you cannot specify any drivers as being
>;     loadable.
>;
>; A/D and Laboratory devices: None specified
>;
>; Interprocessor communication devices: None specified
>;
>; Unit record devices: LP
>;
>; Enter vector, CSR, printer option
>;              (,[KMC timeout count <0=no KMC>, KMC vector, KMC CSR]) for:
>;
>* 16. LP controller 0 [D: 200,177514,LA180,0,300,160130] [S]: 
>;
>; Disks: DM
>;
>; Enter vector, CSR, # drives, O=offset recovery/NO=no offset rec. for:
>;
>* 13. DM controller 0 [D: 210,177440,,O]           [S]: ,,4
>* 54. Contr 0 unit 0. is an RK06/RK07 [D: RK06]    [S]: RK07
>* 54. Contr 0 unit 1. is an RK06/RK07 [D: RK06]    [S]: RK07
>* 54. Contr 0 unit 2. is an RK06/RK07 [D: RK06]    [S]: RK07
>* 54. Contr 0 unit 3. is an RK06/RK07 [D: RK06]    [S]: RK07
>;
>; Tapes: MT
>;
>; Enter vector, CSR, number of drives for:
>;
>*  3. MT controller 0 [D: 224,172522]              [S]: ,,2
>;
>; Non-physical (pseudo) devices: CO, NL, TI, CL, LB, SY
>;
>; Terminal interface devices: YL
>;
>; Enter vector, CSR, E=DL11-E modem support/NO=no for:
>;
>* 21. YL controller 0 [D: 60,177560,NO]            [S]: 
>* 21. YL controller 1 [D: ,,NO]                    [S]: 300,176500
>;
>* EOS *  Do you want to: <CR>-continue E-exit P-pause [S]: 
>;
>;
>; End of interrupt vector area has been set to 400
>;
>;
>; Create Executive build files
>;
>PIP RSXMC.MAC=SY0:RSXMC0.MAC/AP
>;
>*  1. Do you wish to edit any of the Executive files? [Y/N]: 
>;
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>ASN SY:=LB:
>;
>; Start of Executive assembly at 18:59:36 on 26-JUL-17
>SET /UIC=[11,20]
>MAC @SY:RSXASM
>;
>; End of Executive assembly at 19:01:54 on 26-JUL-17
>;
>* EOX * Did the Executive assemble correctly? [Y/N]: Y
>;
>;
>; Start of MCR (subset) assembly at 19:04:02 on 26-JUL-17
>SET /UIC=[12,20]
>PIP *.OBJ;*/DE/NM
>MAC @SY:MCRSETASM
>;
>; End of MCR (subset) assembly at 19:04:30 on 26-JUL-17
>;
>* EOX * Did MCR (subset) assemble correctly? [Y/N]: Y
>;
>;
>;
>; Start of device drivers assembly at 19:04:33 on 26-JUL-17
>SET /UIC=[11,20]
>MAC @SY:RSXDRVASM
>;
>; End of device drivers assembly at 19:04:56 on 26-JUL-17
>;
>* EOX * Did the device drivers assemble correctly? [Y/N]: Y
>;
>ASN =LB:
>;
>; Prepare for task building
>;
>SET /UIC=[1,20]
>PIP RSX11M.OBS=[11,20]*.OBJ
>LBR RSX11M/CR:100.:1010.:128./-EP=RSX11M.OBS
>PIP [1,20]MCR.OBJ/NV/NM=[12,20]*.OBJ
>PIP [12,20]*.OBJ;*/DE/NM
>PIP /NV=[11,10]RSXBLD.CMD
>PIP [11,10]RSXBLD.CMD;*/DE/NM
>;
>* EOX  Were the task build preparations made successfully? [Y/N]: Y
>;
>;
>; Clean-up extraneous object files
>;
>PIP RSX11M.OBS;*/DE/NM,TTDRV.OBJ;*,[11,20]*.OBJ;*,*.TTY;*
>;
>* EOS * Do you want to: <CR>-continue R-repeat section P-pause [S]: 
>;
>; End of SYSGEN phase I at 19:05:24 on 26-JUL-17
>;     -- To continue type: @[200,200]SYSGEN2
>;
>SET /UIC=[200,200]
>@ <EOF>
>ASN SY:=IN:
>ASN SY:=OU:
>ASN NL:=LI:
>SET /UIC=[1,20]
>MAC @[14,24]RMDASM
>LBR RMD/IN/-EP=GBLPDM,V1HPDM,V52PDM,L36PDM,PDCOM,PDINIT,PDPAGE,PDCMD
>PIP *PDM.OBJ;*,PD*.OBJ;*/DE
>SET /UIC=[200,200]
>@SYSGEN2
>;
>; RSX-11M V4.8 BL70  System Generation PHASE II -- Version 06.06
>;
>; 26-JUL-17 19:09:18
>;
>*  1. UIC of SGNPARM.CMD if not [200,200] [S]: 
>;
>; RK06/RK07 distribution kit SYSGEN version 06.03 for RSX-11M BL70  
>;
>; Continuation from SYSGEN PHASE I done on 26-JUL-17 at 19:05:22
>;
>; SYSGEN assumes that the map disk is already mounted in SY0: with
>; UFD [1,30].
>;
>;
>*  2. Do you want to inhibit execution of MCR commands (PREPGEN)? [Y/N]: 
>*  3. Use an input saved answer file? [Y/N]: 
>*  5. Name of output saved answer file [D: DM1:[200,200]SYSUNMAP.CMD;2] [S]: 
>;
>; Phase II output saved answers created in file DM1:[200,200]SYSUNMAP.CMD;2
>;
>ASN SY:=LB:
>PIP /FR

DM1: has 6933. blocks free, 46857. blocks used out of 53790.
Largest contiguous space = 4285. blocks
1738. file headers are free, 1570. headers used out of 3308.

>;
>; Start of library build at 19:09:36 on 26-JUL-17
>;
>SET /UIC=[1,1]
>PIP LB:ANSLIB.OLB/NV=LB:SYSLIB.OLB
>LBR LB:ANSLIB/RP=SY0:FCSMTA
Module "ANSPAD" replaced

Module "ASSLUN" replaced

Module "BIGBUF" replaced

Module "CLOSE " replaced

Module "CONTRL" replaced

Module "CREATE" replaced

Module "DIRECT" replaced

Module "FCSTYP" replaced

Module "GET   " replaced

Module "GETSQ " replaced

Module "OPEN  " replaced

Module "OPENR " replaced

Module "OPFID " replaced

Module "OPFNB " replaced

Module "PARSFN" replaced

Module "POINT " replaced

Module "PUT   " replaced

Module "PUTSQ " replaced

Module "RDWAIT" replaced

Module "RETADR" replaced

Module "RSTFDB" replaced

Module "RWBLK " replaced

Module "RWLONG" replaced

Module "WATSET" replaced

Module "WTWAIT" replaced

Module "WTWATD" replaced

>SET /UIC=[1,20]
>LBR SY0:MCR/RP=SY0:MCR.OBJ
Module "DV2OV " replaced

Module "SPSOV " replaced

Module "STSUB " replaced

Module "SX1OV " replaced

Module "SX2OV " replaced

Module "SX3OV " replaced

Module "SX4OV " replaced

Module "ST5OV " replaced

>;
>; End of library build at 19:10:10 on 26-JUL-17
>;
>;
>* EOX * Did the libraries build sucessfully? [Y/N]: Y
>;
>;
>; Start of Executive task build at 19:10:15 on 26-JUL-17
>;
>*  1. List Executive map? [Y/N]: 
>PIP [1,30]*.*;*/DE/NM
>TKL @LB:RSXBLD
>;
>; End of Executive task build at 19:10:28 on 26-JUL-17
>;
>;
>* EOX * Did the Executive build successfully? [Y/N]: Y
>;
>;
>; Look in the map of the Executive for the symbol $SYTOP which indicates
>; the last address allocated to the Executive.  Partitions may start at any
>; location beyond this address so long as they fall on a 32 word boundary.
>;
>; The following is a table of the default base address (in 32 word blocks)
>; and length (in 32 word blocks) for the partitions of SYSGEN built tasks.
>; This table may assist you in establishing partitions in your system.  The
>; base addresses are calculated on the the assumption that $SYTOP does not
>; exceed 40000.  A base address other than the default listed below can be
>; specified in response to the respective question in the Privileged TKB
>; section.  A length other than the default listed below can be specified by
>; editing the respective task build .CMD file and the SYSVMR.CMD to
>; reflect the desired length.
>;
>;                                   BASE
>;       PARTITION                  ADDRESS   LENGTH
>;       --------                   -------   ------
>;       PAR14K                     400       700
>;       GEN (subpar. of PAR14K)    400       400
>;       SYSPAR                     1300      120
>;
>;
>; Start of system image creation at 19:10:38 on 26-JUL-17
>;
>SET /UIC=[1,50]
>PIP RSX11M.SYS/CO/NV/BL:114.=RSX11M.TSK
>;
>; End of system image creation at 19:10:38 on 26-JUL-17
>;
>;
>* EOX * Was the system image created correctly? [Y/N]: Y
>;
>;
>; Start of privileged task build at 19:10:42 on 26-JUL-17
>;
>SET /UIC=[1,20]
>;
>;	Note that the following tasks will be built for your system:
>;
>;		BOO	DMO	F11MSG	FCPSML	HEL	ICP	INI
>;		INS	MCR	MOU	MTAACP	PMD	RMD	SAV
>;       	TKTN	UFD
>;
>;
>*  1. Map device for privileged tasks (ddu:) [D:  NL:] [S]: 
>*  2. GEN's base address in 32 word blocks [O D:400]: 560
>*  3. SYSPAR's base in 32 word blocks [O D:1300]: 1460
>*  5. Pause to edit any task build .CMD or .ODL files? [Y/N]: 
>*  6. Delete task build .CMD and .ODL files after building? [Y/N]: 
>;
>;
>; Creating the task build .CMD and .ODL files in SY:[1,20]
>;
>TKL @SY:[1,20]BOOBLD.CMD
>TKL @SY:[1,20]DMOBLD.CMD
>TKL @SY:[1,20]F11MSGBLD.CMD
>TKL @SY:[1,20]FCPSMLBLD.CMD
>TKL @SY:[1,20]HELBLD.CMD
>TKL @SY:[1,20]ICPBLD.CMD
>TKL @SY:[1,20]INIBLD.CMD
>TKL @SY:[1,20]INSBLD.CMD
>TKL @SY:[1,20]MCRBLD.CMD
>TKL @SY:[1,20]MOUBLD.CMD
>TKL @SY:[1,20]MTABLD.CMD
>TKL @SY:[1,20]PMDBLD.CMD
>TKL @SY:[1,20]RMDBLD.CMD
>TKL @SY:[1,20]SAVBLD.CMD
>TKL @SY:[1,20]TKNBLD.CMD
>TKL @SY:[1,20]UFDBLD.CMD
>;
>; End of privileged task build at 19:16:38 on 26-JUL-17
>;
>;
>* EOX * Did the privileged tasks build successfully? [Y/N]: Y
>;
>;
>; Start of system VMR at 19:16:54 on 26-JUL-17
>;
>SET /UIC=[1,50]
>; 
>;     Your target system is now ready to set up partitions and install
>;     the required tasks.  SYSGEN has created a file SYSVMR.CMD; edit
>;     this command file to do the following:
>;
>;     1) Extend pool space to base of first partition
>;     2) Set up your partitions, particularly your device partitions
>;     3) Install the privileged tasks you just built
>;     4) Load any loadable drivers that you want resident
>;        in the system image.  If the terminal and/or system
>;        disk drivers are loadable, they must be loaded using VMR.
>; 
>;     When VMR prompts Enter filename> respond with @SYSVMR
>;
>;     Note that for mapped systems the SYSVMR file will typically
>;     produce a valid system image without editing; for unmapped
>;     systems no such claim is made.  It is, however, our best guess.
>;     Note that on unmapped systems no driver partitions are created
>;     by SYSGEN.  You must edit them in yourself.
>;
>*  1. Edit SYSVMR.CMD? [Y/N]: 
>;
>;
>; You will have to run VMR after the command file exits
>; since we don't know what is the real system volume.
>;
>; End of system VMR at 19:17:01 on 26-JUL-17
>;
>;
>; An alternate version of SYSLIB.OLB, the system object library, was
>; created to provide support for ANSI magtape/FCS big-buffering (which
>; you selected in Phase I).  You may want to rebuild DMP, FLX, PIP, and 
>; VFY in Phase III to use ANSLIB.OLB.  Note, however, building tasks with
>; ANSLIB.OLB causes an increase in the size of tasks as compared to the
>; SYSLIB.OLB version of the tasks.
>;
>; The target system'S GEN partition base address of '$GPB'00 does not match the
>; baseline system'S GEN partition base address of 40000.  Therefore distributed
>; non-privileged tasks must be rebuild in Phase III before they can run.
>; 
>; When SYSGEN finishes, boot in your target system, and save the system with a
>; bootstrap.  For example:
>;
>;     >BOO [1,50]RSX11M
>;	RSX11M V4.8 BL70 
>;
>;
>;	>TIM 12:00 14-JUN-97
>;	>SAV /WB
>; 
>;	RSX11M V4.8 BL70 	28.K
>;     >RED DM:=SY:
>;     >RED DM:=LB:
>;     >MOU DM:RSXM70
>;     >@DM:[1,2]STARTUP
>;     .
>;     .
>;     .
>;
>;
>; End of SYSGEN phase II at 19:17:02 on 26-JUL-17
>;
>SET /UIC=[200,200]
>@ <EOF>
>@SYSGEN3
>;
>; RSX-11M V4.8 System Generation PHASE III -- Version 05.05
>;
>; 26-JUL-17 19:17:14
>;
>*  1. In what UIC is SGNPARM.CMD if not in [200,200] [S]: 
>;
>; RK06/RK07 distribution kit SYSGEN version 06.03 for RSX-11M BL70  
>;
>; Continuation from SYSGEN PHASE I done on 26-JUL-17 at 19:05:22
>;
>*  2. Are you building nonprivileged tasks? [Y/N]: Y
>*  4. Enter map device (ddu:) [D: NL:] [S]: 
>ASN SY:=LB:
>;
>;	For nonprivileged tasks:  * -- Prints the table of tasks
>;				  % -- Builds all tasks
>;				  . -- Terminates inquiry
>;
>;	Enter responses separated by commas.  All responses need
>;	not fit on one line.
>;
>; Example:  BAD,LBR,PIP,.
>;
>* 5. Enter task name(s) [S]: %
>;
>; LB:[1,1]ANSLIB.OLB can be used to build certain tasks
>; so that those tasks have ANSI/big-buffered support
>;
>*  7. Use LB:[1,1]ANSLIB.OLB when building those tasks? [Y/N]: Y
>*  8. GEN's base address in 32 word blocks [O D:400]: 560
>* 11. Pause to edit any task build .CMD or .ODL files? [Y/N]: 
>* 12. Delete task build .CMD and .ODL files after task building? [Y/N]: 
>SET /UIC=[1,20]
>;
>; Creating the task build .CMD and .ODL files in SY:[1,20]
>;
>TKL @SY:[1,20]BADBLD.CMD
>TKL @SY:[1,20]CDABLD.CMD
>TKL @SY:[1,20]CMPBLD.CMD
>TKL @SY:[1,20]CRFBLD.CMD
>TKL @SY:[1,20]DMPANSBLD.CMD
>TKL @SY:[1,20]EDIBLD.CMD
>TKL @SY:[1,20]FLXANSBLD.CMD
>TKL @SY:[1,20]FMTBLD.CMD
>TKL @SY:[1,20]FTBBLD.CMD
>TKL @SY:[1,20]IOXBLD.CMD
>TKL @SY:[1,20]LBRBLD.CMD
>TKL @SY:[1,20]MACBLD.CMD
>TKL @SY:[1,20]PATBLD.CMD
>TKL @SY:[1,20]PIPANSBLD.CMD
>TKL @SY:[1,20]RPTBLD.CMD
>TKL @SY:[1,20]SLPBLD.CMD
>TKL @SY:[1,20]TKBBLD.CMD
>TKL @SY:[1,20]VFYANSBLD.CMD
>TKL @SY:[1,20]VMRBLD.CMD
>TKL @SY:[1,20]ZAPBLD.CMD
>ASN =LB:
>SET /UIC=[200,200]
>@ <EOF>
>SET /UIC=[1,50]
>INS $VMR
>EDI SYSVMR.CMD
[00029 lines read in]
[Page    1]
*F SET /POOL
SET /POOL=400
*C /400/560/
SET /POOL=560
*^Z
[Exit]

>VMR @SYSVMR
VMR -- *DIAG*-Privileged task larger than 12K
INS ICP	! INS FULL CAPACITY INDIRECT COMMAND PROCESSOR
POOL=560:1166.:01166.
LDR    046132 046016 000000 MAIN TASK
PAR14K 055710 056000 070000 MAIN TASK
GEN    055654 056000 040000 SUB  TASK
SYSPAR 055744 146000 012000 MAIN TASK
. LDR.        046164 LDR    248. 000000 LB0:-00000000 FIXED
TKTN   05.00  054144 SYSPAR 248. 012000 LB0:-00140656
...RMD 03.10  055464 GEN    225. 040000 LB0:-00142504
F11MSG 13.00  055200 GEN    200. 040000 LB0:-00140534
MTAACP 15.04  055104 GEN    200. 040000 LB0:-00142306
...DMO 04.00  055274 GEN    160. 040000 LB0:-00140515
MCR... 07.00  054430 SYSPAR 160. 012000 LB0:-00142016
...MOU 27.02  054334 GEN    160. 040000 LB0:-00141640
F11ACP 06.02  055560 SYSPAR 149. 012000 LB0:-00141050
PMD... 08.01  054524 GEN    140. 040000 LB0:-00142434
...INS 9.02   054620 GEN    100. 040000 LB0:-00141602
...SAV 05.01  054240 GEN    100. 040000 LB0:-00142717
...UFD 05.00  054050 GEN    100. 040000 LB0:-00141024
...AT. 9.01   054714 PAR14K  64. 070000 LB0:-00141402
...BOO 06.02  055370 GEN     50. 040000 LB0:-00140546
...MAG 03.00  055010 GEN     50. 040000 LB0:-00140610
LP0:  
DM0:  
DM1:  
DM2:  
DM3:  
MT0:  
MT1:  
TT0:  
TT1:  
NL0:  
TI0:  
CO0:  TT0:
CL0:  TT0:
LB0:  DM0:
SY0:  DM0:
>BOO [1,50]
RSX11M V4.8 BL70  


>
>TIM 19:22 26-JUL-2016\6\7
>SAV /WB

  RSX-11M V4.8 BL70   28.K
>RED DM1:=SY:
>RED DM1:=LB:
>MOU DM1:RSXM70
>@DM1:[1,2]STARTUP
>* Please enter time and date (HH:MM DD-MMM-YY) [S]: 19:23:14 26-JUL-201
>TIME 19:23:14 26-JUL-2017
>@ <EOF>
>
