>@SYSGEN
>;
>; RSX-11M V4.8 BL70   System Generation PHASE I -- Version 06.03
>;
>; 26-JUL-17 16:43:25
>; RK06/RK07 distribution kit
>;
>*  1. Autoconfigure the host system hardware? [Y/N]: Y
>INS $ACF.BSL
>INS $ACO
>ACF
>ACO SHOW
Processor Type:  11/34          Memory Size:  124. Kw

Options:

        Floating Point Processor (FP11)
        Extended Instruction Set (EIS)
        Switch Register (SWR)
        Display Register
        Parity Memory

Name    Vector     CSR      Unit    Type      Remark
DMA      210      177440                     
                             0      RK07     
MTA      224      172522                     
LPA      200      177514                     
YLA      060      177560                     
YLB      300      176500                     

>ACO SYSGEN
>REM ACF
>REM ACO
>*  2. Do you want to override Autoconfigure results? [Y/N]: Y
>*  3. Do you want to inhibit execution of MCR commands (PREPGEN)? [Y/N]: 
>*  4. Have you made a copy of the distribution kit? [Y/N]: Y
>*  5. Are you generating an unmapped system? [Y/N]: 
>*  6. Use an input saved answer file? [Y/N]: 
>*  8. Do you want a Standard Function System? [Y/N]: 
>*  9. Name of output saved answer file [D: SYSSAVED.CMD] [S]: SYSMAPPED.CMD
>;
>; Phase I output saved answers created in file DM0:[200,200]SYSMAPPED.CMD;1
>;
>* 14. Clean up files from previous GENs? [Y/N]: Y
>* 15. Chain to Phase II after Phase I completes? [Y/N]: Y
>SET /UIC=[1,1]
>PIP [1,20]RSXBLD.CMD;*/DE/NM
>PIP [1,24]RSXBLD.CMD;*/DE/NM,TTDRVBLD;*
>PIP [1,50]SYSVMR.CMD;*/DE/NM,[1,54]SYSVMR;*
>PIP [11,20]*.OBJ;*/DE/NM,*.UDC;*,*.ICR;*,*.IDS;*,*.PCS;*
>PIP [11,24]*.OBJ;*/DE/NM,*.UDC;*,*.ICR;*,*.IDS;*,*.TTY;*,*.PCS;*
>PIP [11,30]*.LST;*/DE/NM,[11,34]*.LST;*
>PIP [11,10]RSXMC.MAC;*/DE/NM,ICTAB;*,[200,200]SGNPARM.CMD;*
>PIP [200,200]RSXBLD.CMD;*/DE/NM,TTDRVBLD;*
>PIP SY:[11,20]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,[12,20]MCRSETASM;*
>PIP SY:[11,24]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,[12,20]MCRSETASM;*
>PIP SY0:[11,24]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,[12,24]MCRSETASM;*
>PIP /FR

DM0: has 17150. blocks free, 36640. blocks used out of 53790.
Largest contiguous space = 17127. blocks
2200. file headers are free, 1108. headers used out of 3308.

>SET /UIC=[11,10]
>;
>; Target configuration
>;
>*  1. Processor Type  [D: 11/34]  [S]: 
>*  2. Does processor have a switch register? [Y/N D:Y]: 
>*  3. Memory size (in K-word blocks) [D R:16.-124. D:124.]: 
>; If you specified 128 kw or more this system will only run on 22 bit systems.
>*  4. Include support for K-series devices? [Y/N D:N]: 
>*  6. Floating point processor (FP-11) present? [Y/N D:Y]: 
>*  8. Extended instruction set (EIS) present? [Y/N D:Y]: 
>*  9. If using KW11-P as system clock: number of intrps./sec. [D R:0.-1000. D:0
>* 10. Line frequency:   A- 60 Hz    B- 50 Hz   [D: A] [S]: B
>* 11. KW11-Y Watchdog timer support? [Y/N D:N]: 
>* 12. Memory parity support? [Y/N D:Y]: 
>* 13. Cache memory? [Y/N D:N]: 
>;
>; The response to the following question specifies the highest interrupt
>; vector.  If you respond with a value less than or equal to 400, SYSGEN
>; will assign the value associated with the highest interrupt vector
>; specified during the Peripheral Section.  Therefore, if your system
>; will include devices that are not specified during the Peripheral
>; Section and which have vectors above 400 (devices such as K-series and
>; certain communication devices), specify that value in the next question.
>;
>* 14. Highest interrupt vector [O R:0-774 D:0]: 374
>;     For device configuration: "*" Prints device table, "." Terminates inquiry
>;                               "?" Prints current configuration
>;     Enter devices and number of controllers for devices which require drivers
>;
>;     Current system configuration:
>;
>;     DM=1, LP=1, MT=1, YL=2
>* 15. Devices [S]: NL,CO.
>;
>; Processor:11/34   Memory Size:124K,Mapped   System:RSX-11M
>;
>;           Switch Register
>;           Floating Point Processor
>;           Extended Instruction Set
>;           Parity Memory
>;
>; Host configuration
>;
>*  1. Is a line printer available? [Y/N]: Y
>*  3. Does the listing/map device have at least 120 columns? [Y/N]: Y
>*  4. Assembly listings device (ddu:) [D: "NL:"] [S]: 
>*  5. Map device for Executive and device drivers (ddu:) [D: SY0:] [S]: 
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>; Executive Options
>;
>;     Answer Y(ES) if the following support is desired
>;
>*  1. Include support for DBMS-11? [Y/N]: Y
>;     Files-11 ACP support will be included
>*  3. Bucket locking (file sharing) and placement control? [Y/N]: Y
>*  4. Non-resident tasks (task loader)? [Y/N]: Y
>*  5. Loadable task loader? [Y/N]: Y
>*  6. Executive Common? [Y/N]: Y
>;     Memory management directives (PLAS) support will be included
>;     Send/Receive by reference support will be included
>*  9. Get mapping context directive? [Y/N]: Y
>;     Address checking support will be included
>;     I/O rundown support will be included
>* 12. Multi-user protection? [Y/N]: Y
>* 13. ANSI Magtape ACP? [Y/N]: Y
>* 14. Do you want on-line formatting (FMT) or diagnostic QIOs? [Y/N]: Y
>* 15. Loadable device drivers? [Y/N]: Y
>* 16. Should the default for all applicable drivers be loadable? [Y/N]: Y
>;     AST support will be included
>;     Cancel selective marktime support will be included
>* 19. Task termination and device not ready messages (TKTN)? [Y/N]: Y
>* 20. Power fail recovery? [Y/N]: Y
>* 21. Install, request, and remove on exit? [Y/N]: Y
>* 22. Large (20K) Executive? [Y/N]: Y
>* 23. Logical device assignment? [Y/N]: Y
>* 24. Include support for error logging? [Y/N]: Y
>* 25. Do you intend to include a user-written driver? [Y/N]: 
>* 28. Disk writecheck? [Y/N]: Y
>* 29. Software write-lock? [Y/N]: Y
>* 30. Executive Debugging Tool (XDT)? [Y/N]: Y
>* 32. Include support for communications products (such as DECnet)? [Y/N]: Y
>;
>;  If you will be generating DECnet into this system, be sure you have
>;  read the section on SYSGEN requirements in the  "RSX DECnet Network
>;  Generation and Installation Guide." 
>;  Several  DECnet  features  (eg. remote terminal support,  11S  task 
>;  loading/upline dumping, etc.) require special  consideration during
>;  SYSGEN.
>;
>* 32A. Include Network Command Terminal support? [Y/N]: Y
>;     System controlled partition support will be included
>* 34. Include support for the Shuffler? [Y/N]: Y
>* 35. Queue manager and queued print spooler? [Y/N]: Y
>* 36. Group global event flags? [Y/N]: Y
>;
>;     For directives:
>;
>;     * - Prints the table
>;     . - Terminates inquiry
>;     % - Gets all valid directives and terminates inquiry
>;
>* 37. Enter code for system directives [S]: %
>;     Checkpointing support will be included
>* 38. Number of pre-allocated QIO packets [D R:0.-15. D:5.]: 
>* 39. Size of data transfer vector in words [D R:0.-33. D:33.]: 
>* 40. Round-robin scheduling interval in ticks [D R:0.-1000. D:5.]: 
>* 41. Highest priority class for consideration [D R:1.-249. D:150.]: 
>* 42. Lowest priority class for consideration [D R:1.-150. D:1.]: 
>* 43. Executive level disk swapping interval [D R:0.-5000. D:30.]: 
>* 44. Swapping priority [D R:1.-20. D:5.]: 
>* 46. Seconds between printer not ready messages [D R:0.-255. D:30.]: 
>* 48. System crash register and stack dump device CSR [O R:0-177700 D:177564]: 
>* 50. Checkpointing with system checkpoint file? [Y/N]: Y
>* 51. Crash dump analysis:  A- PANIC  B- Crash Dump Analysis (CDA)  C- None  [D
>* 52. CDA output notification device CSR [O R:160000-177700 D:177564]: 
>* 53. Enter CDA memory dump device mnemonic (ddu:) [S R:3-6]: MT0:
>* 54. Enter CDA memory dump device CSR [O R:160000-177700 D:172522]: 
>* 56. RT-11 emulation support? [Y/N]: Y
>;
>* EOS *  Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>;
>; Terminal driver options
>;      The Full Duplex Terminal Driver will be included.
>*  2. Unsolicited input timeout value in seconds [D R:0.-255. D:120.]: 
>;
>;     Answer Y(ES) if the following support is desired
>;
>*  6. Unsolicited input character AST? [Y/N]: Y
>;     Breakthrough write support will be included
>;     CTRL/R support will be included
>* 10. Escape sequence handling? [Y/N]: Y
>* 11. Get multiple characteristics? [Y/N]: Y
>* 12. Set multiple characteristics? [Y/N]: Y
>* 13. Get terminal driver options? [Y/N]: Y
>* 17. Read after prompt? [Y/N]: Y
>* 20. CRT rubout support? [Y/N]: Y
>* 25. Hardware unrecoverable input error notification? [Y/N]: Y
>* 26. Device independent cursor positioning? [Y/N]: Y
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>;
>; System Options
>;
>;
>;     Answer Y(ES) if the following support is desired
>;
>* 2A. Include support for the IP11 Industrial I/O Subsystem? [Y/N]: 
>*  3. Build the PLAS resident FCS? [Y/N]: Y
>*  4. Code for FCP (A/B/C/D/E, * prints table) [D: C] [S]: D
>*  5. Build Post Mortem Dump (PMD)? [Y/N]: Y
>*  6. Build the Resource Monitoring Display task (RMD)? [Y/N]: Y
>*  8. Do you want DIGITAL Command Language (DCL)? [Y/N]: Y
>*  9. Enter the number of user-written CLIs [D R:0.-13. D:0.]: 4
>* 10. Do you want pool monitoring and low pool recovery (PMT)? [Y/N]: Y
>* 11. What name would you like to give your system [D: RSX11M] [S R:0-6]: 
>* 12. Do you want SPM-11 support? [Y/N]: 
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>;     Thinking ...
>; End of Executive option generation at 16:46:46 on 26-JUL-17
>;
>; Peripheral configuration
>;
>;     Parameters  appearing  in  square  brackets  "[...]"  can  only be
>;     specified  for  the  first  controller  of  a  particular  device.
>;     Parameters appearing in parentheses "(...)" only need be specified
>;     if   the  indicated  option  is  present  on  the  target  system.
>;    
>;     The   default  for  loadable  drivers  has  been  set  to  *TRUE*.
>;     To override this setting enter R (resident) as the first parameter
>;     for    the    first    controller   of   the   specified   device.
>;    
>; A/D and Laboratory devices: None specified
>;
>; Interprocessor communication devices: None specified
>;
>; Unit record devices: LP
>;
>; Enter [L/R,] vector, CSR, printer option
>;              (,[KMC timeout count <0=no KMC>, KMC vector, KMC CSR]) for:
>;
>* 16. LP controller 0 [D: 200,177514,LA180,0,300,160130] [S]: 
>;
>; Disks: DM
>;
>; Enter [L/R,] vector, CSR, # drives, O=offset recovery/NO=no offset rec. for:
>;
>* 13. DM controller 0 [D: 210,177440,1,O]          [S]: ,,4
>* 54. Contr 0 unit 0. is an RK06/RK07 [D: RK07]    [S]: 
>* 54. Contr 0 unit 1. is an RK06/RK07 [D: RK06]    [S]: RK07
>* 54. Contr 0 unit 2. is an RK06/RK07 [D: RK06]    [S]: RK07
>* 54. Contr 0 unit 3. is an RK06/RK07 [D: RK06]    [S]: RK07
>;
>; Tapes: MT
>;
>; Enter [L/R,] vector, CSR, number of drives for:
>;
>*  3. MT controller 0 [D: 224,172522]              [S]: ,,2
>;
>; Non-physical (pseudo) devices: CO, NL, TI, CL, LB, SY
>;
>; Terminal interface devices: YL
>;
>; Enter vector, CSR, E=DL11-E modem support/NO=no for:
>;
>* 21. YL controller 0 [D: 60,177560,NO]            [S]: 
>* 21. YL controller 1 [D: 300,176500,NO]           [S]: 
>SET /UIC=[1,24] ! Creating TTDRVBLD.CMD
>SET /UIC=[11,10]
>;
>* EOS *  Do you want to: <CR>-continue E-exit P-pause [S]: 
>;
>;
>; End of interrupt vector area has been set to 400
>;
>;
>; Create Executive build files
>;
>PIP RSXMC.MAC=SY0:RSXMC0.MAC/AP
>;
>*  1. Do you wish to edit any of the Executive files? [Y/N]: 
>;
>;
>* EOS * Do you want to: <CR>-continue R-repeat section E-exit P-pause [S]: 
>;
>ASN SY:=LB:
>;
>; Start of Executive assembly at 16:48:45 on 26-JUL-17
>SET /UIC=[11,24]
>MAC @SY:RSXASM
>;
>; End of Executive assembly at 16:51:07 on 26-JUL-17
>;
>* EOX * Did the Executive assemble correctly? [Y/N]: Y
>;
>;
>; Start of MCR (subset) assembly at 16:51:17 on 26-JUL-17
>SET /UIC=[12,24]
>PIP *.OBJ;*/DE/NM
>MAC @SY:MCRSETASM
>;
>; End of MCR (subset) assembly at 16:51:57 on 26-JUL-17
>;
>* EOX * Did MCR (subset) assemble correctly? [Y/N]: Y
>;
>;
>;
>; Start of device drivers assembly at 16:52:03 on 26-JUL-17
>SET /UIC=[11,24]
>MAC @SY:RSXDRVASM
>;
>; End of device drivers assembly at 16:53:52 on 26-JUL-17
>;
>* EOX * Did the device drivers assemble correctly? [Y/N]: Y
>;
>ASN =LB:
>;
>; Prepare for task building
>;
>SET /UIC=[1,24]
>PIP RSX11M.OBS=[11,24]*.OBJ
>PIP TTDRV.OBJ=[11,24]*.TTY
>LBR RSX11M/CR:100.:1010.:128./-EP=RSX11M.OBS
>LBR TTDRV/CR:30.:380.:64.=TTDRV
>PIP [1,24]MCR.OBJ/NV/NM=[12,24]*.OBJ
>PIP [12,24]*.OBJ;*/DE/NM
>PIP /NV=[11,10]RSXBLD.CMD
>PIP [11,10]RSXBLD.CMD;*/DE/NM
>;
>* EOX  Were the task build preparations made successfully? [Y/N]: Y
>;
>;
>; Clean-up extraneous object files
>;
>PIP RSX11M.OBS;*/DE/NM,TTDRV.OBJ;*,[11,24]*.OBJ;*,*.TTY;*
>;
>* EOS * Do you want to: <CR>-continue R-repeat section P-pause [S]: 
>;
>; End of SYSGEN phase I at 16:54:17 on 26-JUL-17
>;      -- Chaining to [200,200]SYSGEN2.CMD
>;
>SET /UIC=[200,200]
>;
>; RSX-11M V4.8 BL70  System Generation PHASE II -- Version 06.06
>;
>; 26-JUL-17 16:54:17
>;
>;
>; RK06/RK07 distribution kit SYSGEN version 06.03 for RSX-11M BL70  
>;
>; Continuation from SYSGEN PHASE I done on 26-JUL-17 at 16:54:13
>;
>; SYSGEN assumes that the map disk is already mounted in SY0: with
>; UFD [1,34].
>;
>;
>INS SY:[1,54]TKB.TSK/TASK=...TKL
>;
>; Phase II output saved answers created in file DM0:[200,200]SYSMAPPED.CMD;2
>;
>LOA LP:
>ASN SY:=LB:
>PIP /FR

DM0: has 16810. blocks free, 36980. blocks used out of 53790.
Largest contiguous space = 16313. blocks
2190. file headers are free, 1118. headers used out of 3308.

>;
>; Start of library build at 16:54:23 on 26-JUL-17
>;
>SET /UIC=[1,1]
>PIP LB:ANSLIB.OLB/NV=LB:SYSLIB.OLB
>LBR LB:ANSLIB/RP=SY0:FCSMTA
Module "ANSPAD" replaced

Module "ASSLUN" replaced

Module "BIGBUF" replaced

Module "CLOSE " replaced

Module "CONTRL" replaced

Module "CREATE" replaced

Module "DIRECT" replaced

Module "FCSTYP" replaced

Module "GET   " replaced

Module "GETSQ " replaced

Module "OPEN  " replaced

Module "OPENR " replaced

Module "OPFID " replaced

Module "OPFNB " replaced

Module "PARSFN" replaced

Module "POINT " replaced

Module "PUT   " replaced

Module "PUTSQ " replaced

Module "RDWAIT" replaced

Module "RETADR" replaced

Module "RSTFDB" replaced

Module "RWBLK " replaced

Module "RWLONG" replaced

Module "WATSET" replaced

Module "WTWAIT" replaced

Module "WTWATD" replaced

>SET /UIC=[1,24]
>LBR SY0:MCR/RP=SY0:MCR.OBJ
Module "DV2OV " replaced

Module "SPSOV " replaced

Module "STSUB " replaced

Module "SX1OV " replaced

Module "SX2OV " replaced

Module "SX3OV " replaced

Module "SX4OV " replaced

Module "ST5OV " replaced

>;
>; End of library build at 16:54:38 on 26-JUL-17
>;
>;
>* EOX * Did the libraries build sucessfully? [Y/N]: Y
>;
>;
>; Start of Executive task build at 16:54:42 on 26-JUL-17
>;
>*  1. List Executive map? [Y/N]: 
>PIP [1,34]*.*;*/DE/NM
>TKL @LB:RSXBLD
>;
>; End of Executive task build at 16:54:53 on 26-JUL-17
>;
>;
>* EOX * Did the Executive build successfully? [Y/N]: Y
>;
>;
>; Start of system image creation at 16:54:58 on 26-JUL-17
>;
>SET /UIC=[1,54]
>PIP RSX11M.SYS/CO/NV/BL:498.=RSX11M.TSK
>;
>; End of system image creation at 16:54:58 on 26-JUL-17
>;
>;
>* EOX * Was the system image created correctly? [Y/N]: Y
>;
>;
>; Start of full duplex terminal driver task build at 16:55:04 on 26-JUL-17
>;
>SET /UIC=[1,24]
>TKL @LB:TTDRVBLD
>;
>; End of full duplex terminal driver task build at 16:55:08 on 26-JUL-17
>;
>;
>* EOX * Did the terminal driver build successfully? [Y/N]: Y
>;
>;
>; Start of loadable driver task build at 16:55:12 on 26-JUL-17
>;
>*  4. Build all selected loadable drivers into DRVPAR? [Y/N]: Y
>TKL @SY0:CODRVBLD
>TKL @SY0:DMDRVBLD
>TKL @SY0:LPDRVBLD
>TKL @SY0:MTDRVBLD
>;
>; End of loadable driver task build at 16:55:21 on 26-JUL-17
>;
>;
>* EOX * Did the loadable drivers task build sucessfully? [Y/N]: Y
>;
>;
>; Start of common block task build at 16:55:23 on 26-JUL-17
>;
>; Build the ANSLIB flavor of the FCS resident library common
>;
>;
>; SYSGEN assumes that the map disk is mounted in SY0: 
>; and that UFD [1,34] exists on it.
>;
>;
>; Creating the task build .CMD and .ODL files in SY:[1,24]
>;
>TKL @SY:[1,24]FCSRS1BLD.CMD
>;
>; Build the SYSLIB flavour of the FCS non-overlaid resident library common
>;
>;
>; SYSGEN assumes that the map disk is mounted in SY0: 
>; and that UFD [1,34] exists on it.
>;
>;
>; Creating the task build .CMD and .ODL files in SY:[1,24]
>;
>TKL @SY:[1,24]FCSFS0BLD.CMD
>;
>; End of common block task build at 16:55:35 on 26-JUL-17
>;
>;
>* EOX * Did the common(s) build successfully? [Y/N]: Y
>;
>;
>; Start of privileged task build at 16:55:38 on 26-JUL-17
>;
>;
>;      Note that the following tasks will be built for your system:
>;
>;              ACNT    ACS     BOO     BRO     BYE     COT     DCL
>;              DMO     ELI     ERRLOG  F11MSG  FCPLRG  HEL     ICP
>;              ICX     INI     INS     LOA     LPP     MCR     MOU
>;              MTAACP  PMD     PMT     QMGCLI  QMG     QMGPRT  RMD
>;              SAV     SHF     SHUTUP  TKTN    UFD     UNL
>;
>;
>*  1. Map device for privileged tasks (ddu:) [D:  NL:] [S]: SY:
>*  5. Pause to edit any task build .CMD or .ODL files? [Y/N]: 
>*  6. Delete task build .CMD and .ODL files after building? [Y/N]: 
>;
>;
>; SYSGEN assumes that the map disk is mounted in SY: 
>; and that UFD [1,34] exists on it.
>;
>;
>; It is assumed that [1,1]FCSRES.STB is an ANSLIB version of the FCS
>; resident library
>;
>;
>; Creating the task build .CMD and .ODL files in SY:[1,24]
>;
>TKL @SY:[1,24]ACNRESBLD.CMD
>TKL @SY:[1,24]ACSRESBLD.CMD
>TKL @SY:[1,24]BOOBLD.CMD
>TKL @SY:[1,24]BROBLD.CMD
>TKL @SY:[1,24]BYEBLD.CMD
>TKL @SY:[1,24]COTRESBLD.CMD
>TKL @SY:[1,24]DCLBLD.CMD
>TKL @SY:[1,24]DMOBLD.CMD
>TKL @SY:[1,24]ELIRESBLD.CMD
>TKL @SY:[1,24]ERLBLD.CMD
>TKL @SY:[1,24]F11MSGBLD.CMD
>TKL @SY:[1,24]FCPLRGBLD.CMD
>TKL @SY:[1,24]HELRESBLD.CMD
>TKL @SY:[1,24]ICPBLD.CMD
>TKL @SY:[1,24]ICXBLD.CMD
>TKL @SY:[1,24]INIBLD.CMD
>TKL @SY:[1,24]INSBLD.CMD
>TKL @SY:[1,24]LOABLD.CMD
>TKL @SY:[1,24]LPPRESBLD.CMD
>TKL @SY:[1,24]MCMBLD.CMD
>TKL @SY:[1,24]MOUBLD.CMD
>TKL @SY:[1,24]MTABLD.CMD
>TKL @SY:[1,24]PMDRESBLD.CMD
>TKL @SY:[1,24]PMTBLD.CMD
>TKL @SY:[1,24]QCLRESBLD.CMD
>TKL @SY:[1,24]QMGRESBLD.CMD
>TKL @SY:[1,24]QPRBLD.CMD
>TKL @SY:[1,24]RMDBLD.CMD
>TKL @SY:[1,24]SAVBLD.CMD
>TKL @SY:[1,24]SHFBLD.CMD
>TKL @SY:[1,24]SHUBLD.CMD
>TKL @SY:[1,24]TKNBLD.CMD
>TKL @SY:[1,24]UFDBLD.CMD
>TKL @SY:[1,24]UNLRESBLD.CMD
>;
>; End of privileged task build at 17:00:28 on 26-JUL-17
>;
>;
>* EOX * Did the privileged tasks build successfully? [Y/N]: Y
>;
>;
>; Start of system VMR at 17:00:32 on 26-JUL-17
>;
>SET /UIC=[1,54]
>*  1. Edit SYSVMR.CMD? [Y/N]: 
>;
>INS $BOO;-1
>INS $VMR;-1
>ASN SY:=LB:
>VMR @SYSVMR
VMR -- *DIAG*-Partition reduced to executive common size
INS EXCOM1
VMR -- *DIAG*-Partition reduced to executive common size
INS EXCOM2
VMR -- *DIAG*-Loadable driver larger than 4K
LOA TT:
VMR -- *DIAG*-Installed tasks may no longer fit in partition
SET /TOP=DRVPAR:-*
POOL=1200:9966.:09966.
EXCOM1 117734 120000 014700 MAIN COM
EXCOM2 117670 134700 010200 MAIN COM
LDRPAR 117624 145100 002600 MAIN TASK
TTPAR  117260 147700 040000 MAIN TASK
DRVPAR 117064 207700 010400 MAIN SYS 
       117020 207700 003400 SUB  DRIVER - DM:
       116720 213300 001100 SUB  DRIVER - LP:
       116620 214400 003400 SUB  DRIVER - MT:
       116520 220000 000300 SUB  DRIVER - CO:
SYSPAR 116454 220300 011700 MAIN TASK
FCSRES 116410 232200 040000 MAIN COM
GEN    116344 272200 465600 MAIN SYS 
LDR... 13.02  117510 LDRPAR 248. 002600 LB0:-00107721 FIXED
TKTN   05.00  111660 SYSPAR 248. 011700 LB0:-00122003
...RMD 03.10  115204 GEN    225. 031200 LB0:-00121071
F11MSG 13.00  114274 GEN    200. 005700 LB0:-00114731
MTAACP 15.04  114160 GEN    200. 014700 LB0:-00120136
...DMO 04.00  114640 GEN    160. 014600 LB0:-00112721
MCR... 07.10  113134 SYSPAR 160. 011700 LB0:-00116757
...DCL 5.11   113020 GEN    160. 053000 LB0:-00113677
...MOU 27.02  112340 GEN    160. 040000 LB0:-00117322
...MCR 07.10  111774 GEN    160. 020000 LB0:-00117404
F11ACP 06.03  116230 GEN    149. 044300 LB0:-00115104
ERRLOG 2.00   114524 GEN    148. 040000 LB0:-00114665
PMT... 2.00   113500 GEN    148. 006400 LB0:-00120603
COT... 2.0    116114 GEN    145. 013600 LB0:-00113431
PMD... 08.01  113364 GEN    140. 016200 LB0:-00120530
SHF... 6.00   112110 SYSPAR 105. 011700 LB0:-00121672
...INS 9.02   113614 GEN    100. 034600 LB0:-00116577
...SAV 05.01  112224 GEN    100. 034000 LB0:-00121463
...UFD 05.00  111544 GEN    100. 005700 LB0:-00122055
QMG... 05.00  116000 GEN     75. 032200 LB0:-00120770
PRT... 2.0    115434 GEN     70. 001100 LB0:-00121062
LP0    06.00  115320 GEN     70. 014500 LB0:-00117060
...ACS 3.00   115070 GEN     70. 005000 LB0:-00113116
...AT. 9.01   113730 GEN     64. 060000 LB0:-00115454
...QUE 07.00  115664 GEN     50. 020000 LB0:-00120621
...PRI 07.00  115550 GEN     50. 020000 LB0:-00120621
...BOO 06.02  114754 GEN     50. 022000 LB0:-00113134
...ELI 1.10   114410 GEN     50. 017400 LB0:-00113603
...MAG 03.00  114044 GEN     50. 031500 LB0:-00120002
...LOA 04.02  113250 GEN     50. 032600 LB0:-00116636
...HEL 04.02  112704 GEN     50. 023700 LB0:-00115177
...BYE 07.01  112570 GEN     50. 013000 LB0:-00113405
...BRO 07.02  112454 GEN     50. 030400 LB0:-00113275
...UNL 4.02   111430 GEN     50. 024500 LB0:-00122073
LP0:    Loaded
DM0:    Loaded
DM1:    Loaded
DM2:    Loaded
DM3:    Loaded
MT0:    Loaded
MT1:    Loaded
CO0:  TT0:
TT0:    Loaded
TT1:    Loaded
NL0:  
TI0:  
CL0:  TT0:
LB0:  DM0:
SY0:  DM0:
>;
>; End of system VMR at 17:00:43 on 26-JUL-17
>;
>;
>; An alternate version of SYSLIB.OLB, the system object library, was
>; created to provide support for ANSI magtape/FCS big-buffering (which
>; you selected in Phase I).  You may want to rebuild DMP, FLX, PIP, and 
>; VFY in Phase III to use ANSLIB.OLB.  Note, however, building tasks with
>; ANSLIB.OLB causes an increase in the size of tasks as compared to the
>; SYSLIB.OLB version of the tasks.
>;
>; A memory resident library of FCS routines (which you selected in Phase I)
>; was built to help reduce task memory requirements.  You may want to rebuild
>; tasks in Phase III to link to the FCS resident library.
>; 
>; When SYSGEN finishes, boot in your target system, and save the system with a
>; bootstrap.  For example:
>;
>;     >BOO [1,54]RSX11M
>;     XDT: 70 
>;
>;     XDT>G
>;      RSX11M V4.8 BL70 
>;
>;
>;      >TIM 12:00 14-JUN-97
>;      >SAV /WB
>; 
>;      RSX11M V4.8 BL70        124.K   MAPPED
>;     >RED DM:=SY:
>;     >RED DM:=LB:
>;     >MOU DM:RSXM70
>;     >@DM:[1,2]STARTUP
>;     .
>;     .
>;     .
>;
>REM TKL
>;
>; End of SYSGEN phase II at 17:00:43 on 26-JUL-17
>;
>SET /UIC=[200,200]
>@ <EOF>
>BOO [1,54]
XDT: 70  

XDT>G
RSX11M V4.8 BL70  


>

>TIM 17:01:10 26-JUL-2017
>SAV /WB

  RSX-11M V4.8 BL70   124.K MAPPED
>RED DM:=SY:
>RED DM:=LB:
>MOU DM:RSXM70
>@DM:[1,2]STARTUP
>* Please enter time and date (HH:MM DD-MMM-YY) [S]: 17:01:19 26-JUL-201
7
>TIME 17:01:19 26-JUL-2017
>* ENTER LINE WIDTH OF THIS TERMINAL [D D:132.]: 80
>SET /BUF=TI:80.
>ACS SY:/BLKS=1024.
>;
>; This system startup command file (LB:[1,2]STARTUP.CMD) contains a
>; template of commands to initialize the queue print spooler and queue
>; LP0:, initialize the error logger, initialize the DCL CLI, and install
>; the RMS Library and Utilities.  As is, these commands are commented out
>; and are not executed.  To include these commands as part of the
>; startup procedure, edit the file to remove the period and semi-colon
>; (.;) comment delimiter from the beginning of each line.  These
>; commands may be useful for initializing the various facilities for
>; your installation or else they may provide a model with which to
>; tailor initialization commands for your particular installation. 
>;
>@ <EOF>
>SET /UIC=[200,200]
>@SYSGEN3
>INS $PIP
>INS $EDI
>INS SY:[1,54]TKB.TSK;1/TASK=...TKL
>;
>; RSX-11M V4.8 System Generation PHASE III -- Version 05.05
>;
>; 26-JUL-17 17:01:34
>;
>*  1. In what UIC is SGNPARM.CMD if not in [200,200] [S]: 
>;
>; RK06/RK07 distribution kit SYSGEN version 06.03 for RSX-11M BL70  
>;
>; Continuation from SYSGEN PHASE I done on 26-JUL-17 at 16:54:13
>;
>*  2. Are you building nonprivileged tasks? [Y/N]: Y
>*  4. Enter map device (ddu:) [D: NL:] [S]: SY:
>;
>; SYSGEN assumes that the map disk is mounted in SY: 
>; and that UFD [1,34] exists on it.
>;
>ASN SY:=LB:
>;
>;      For nonprivileged tasks:  * -- Prints the table of tasks
>;                                % -- Builds all tasks
>;                                . -- Terminates inquiry
>;
>;      Enter responses separated by commas.  All responses need
>;      not fit on one line.
>;
>; Example:  BAD,LBR,PIP,.
>;
>* 5. Enter task name(s) [S]: %
>;
>; [1,1]FCSRES.STB can be used to build many tasks
>; so that those tasks link to the FCS resident library
>;
>*  6. Use [1,1]FCSRES.STB when building those tasks? [Y/N]: Y
>;
>; It is assumed that [1,1]FCSRES.STB is an ANSLIB version of the FCS
>; resident library
>;
>;
>; Note that tasks linked to the FCS resident library can only
>; run on a system with the FCS resident library installed.
>;
>* 11. Pause to edit any task build .CMD or .ODL files? [Y/N]: 
>* 12. Delete task build .CMD and .ODL files after task building? [Y/N]: 
>SET /UIC=[1,24]
>;
>; Creating the task build .CMD and .ODL files in SY:[1,24]
>;
>TKL @SY:[1,24]BADBLD.CMD
>TKL @SY:[1,24]BRUBLD.CMD
>TKL @SY:[1,24]CDARESBLD.CMD
>TKL @SY:[1,24]CFLRESBLD.CMD
>TKL @SY:[1,24]CMPRESBLD.CMD
>TKL @SY:[1,24]CRFRESBLD.CMD
>TKL @SY:[1,24]DMPRESBLD.CMD
>TKL @SY:[1,24]EDIRESBLD.CMD
>TKL @SY:[1,24]EDTRESBLD.CMD
>TKL @SY:[1,24]FLXRESBLD.CMD
>TKL @SY:[1,24]FMTBLD.CMD
>TKL @SY:[1,24]FTBRESBLD.CMD
>TKL @SY:[1,24]IOXRESBLD.CMD
>TKL @SY:[1,24]LBRRESBLD.CMD
>TKL @SY:[1,24]MACRESBLD.CMD
>TKL @SY:[1,24]PATRESBLD.CMD
>TKL @SY:[1,24]PIPRESBLD.CMD
>TKL @SY:[1,24]RPTBLD.CMD
>TKL @SY:[1,24]SLPRESBLD.CMD
>TKL @SY:[1,24]TKBRESBLD.CMD
>TKL @SY:[1,24]VFYRESBLD.CMD
>TKL @SY:[1,24]VMRBLD.CMD
>TKL @SY:[1,24]ZAPRESBLD.CMD
>ASN =LB:
>REM PIP
>REM EDI
>REM TKL
>SET /UIC=[200,200]
>@ <EOF>
>
