>VCP CON SW:[KITS]F77V54/TAP/RO/DRV:MU/MOU:FOR
VCP - Device VF0: (MU1:) has been assigned.
>BRU /REW/NOI/UFD MU1: DU:
BRU - Starting Tape 1 on MU1:

BRU - End of Tape 1 on MU1:

BRU - Completed

>@[367,367]AUTOIN
RSX-11M/M-PLUS Auto-Install Procedure V1.1

          10-MAR-21    02:06:51


Type "?" for help; CTRL/Z to end; or valid input.

Which product(s) do you want to install? F77

Type "?" for help; CTRL/Z to exit Auto-Install; or valid input.

Where are the update files located <DU0:>? 

Type "?" for help; CTRL/Z to skip this product; or valid input.

Which device are the distribution files for F77 (F77) located on (include colon)? MU1:

BRU - Starting Tape 1 on MU1:

BRU - End of Tape 1 on MU1:

BRU - Completed

Products being installed:
    Device	Product	Task name
    ------	-------	---------
    MU1:   	F77	(F77)

Determining system configuration.

BRU - Starting Tape 1 on MU1:

BRU - End of Tape 1 on MU1:

BRU - Completed

WARNING -- no updates found for configuration data file; procedure continuing.

Do you want to customize F77 (F77) (Y/N) <N>? Y

Target device <LB:>? 

Task directory <[3,54]>? 

Where do you want to store the installation files <SY0:>? 

Allow future customization of this file <YES>? 

Purge old versions of FORTRAN if installation is successful <YES>? 

Print release notes <NO>? 

Print log file <NO>? 

Error message type <LONG, SHORT> <LONG>? 

File services <FCS,RMS,BOTH> <BOTH>? 

Use alternate convert module <YES, NO> <NO>? 

Build resident library <YES, NO> <NO>? Y

FCS OTS resident library name <F7FRES, F7FCLS, F7SRES> <F7FCLS>? 

Build RMS OTS resident library F7RCLS <YES, NO> <NO>? Y

Stack size (must never be less than 512 words) <1024>? 

Compiler's dynamic storage <3840>? 

Control section STACK1 (expression analyzer/common block definitions) <1160>? 

DO stack (nested DO/IF statements) <240>? 

Lines per page (plus 3 lines of heading) <octal value> <67>? 

Printer line width <octal value> <204>? 

Supersede output files <0=NO, 1=YES> <0>? 

I- and D-Space support <0=NO, 1=YES> <1>? 

Octal/decimal Version numbers <0=Octal, 1=Decimal> <0>? 1

Reinitialize switches <0=NO, 1=YES> <0>? 

Array subscript bounds checking <0=NO, 1=YES> <0>? 

Number of continuation lines <octal value> <23>? 

Include debug lines <0=NO, 1=YES> <0>? 

Default to INTEGER*4 values <0=NO, 1=YES> <0>? 

Listing <1=Source, 2=(Source,Map) 3=(Source,Map,Generated code)> <2>? 

Read Only code sections <0=NO, 1=YES> <0>? 1

Spool listing <0=NO, 1=YES> <0>? 1

Trace <0=NONE, 1=NAMES, 3=BLOCKS 7=ALL> <3>? 

Number of temporary files <Range 1-3> <2>? 

Enable optional warnings <0=NO, 1=YES> <1>? 

FORTRAN ANSI interpretation <0=FORTRAN-66, 1=FORTRAN-77> <1>? 

Standards checking <0=NONE, 1=SOURCE, 2=SYNTAX, 3=ALL> <0>? 

Produce symbolic debugger information <0=NO, 1=YES> <0>? 

Extend source line <0=NO (72 cols), 1=YES (132 cols)> <0>? 1

Code optimization <0=NO, 3=YES> <3>? 


Do you want to customize F77 (F77) again (Y/N) <N>?  

Installation of F77 (F77) beginning at 10-MAR-21 02:09:19

Reading F77F77.CFG.

Transferring kit files to work area.

BRU - Starting Tape 1 on MU1:

BRU - End of Tape 1 on MU1:

BRU - Completed

BRU - Starting Tape 1 on MU1:

BRU - End of Tape 1 on MU1:

BRU - Completed

DMO -- TT62:   dismounted from MU1:    *** Final dismount initiated ***
Updating kit files.

Module "CMDUTI" replaced

Module "CODEX1" replaced

Module "IOBLKS" replaced

Module "$DATE " replaced

Module "$IDATE" replaced

Building product F77 (F77).

        Running command procedure BLDTKB.CMD

        Building product FORTRAN-77

        BUILD FCS Version of the FORTRAN-77 OTS

Entry points deleted:
$ERTXT

        BUILD RMS Version of the FORTRAN-77 OTS

Entry points deleted:
$ERTXT

        Building OTS resident library F7RCLS (Clustered RMS version)

        Build the vector module to be used with resident libraries

        Replace this module into the FORTRAN OTS (.OLB) without entry points

        Now cleanup 

        Now build the jump module for the actual resident library

        Now taskbuild the FORTRAN resident library that clusters with RMSRES

        Copy the resident library and symbol table file to the target device
        area [1,1]

        Install the library if it is on the system device.  If it is not,
        then we can't for it could be on a kit for another processor.

        Install library on RSX-11M-PLUS

REM -- Common not in system 
INS -- Partition F7RCLS not in system, defaulting to GEN
        Building OTS resident library F7FCLS (Clustered FCS version)

        Build the vector module to be used with resident libraries

        Replace this module into the FORTRAN OTS (.OLB) without entry points

        Now cleanup 

        Now build the jump module for the actual resident library

        Now taskbuild the FORTRAN resident library that clusters with FCSRES

        Copy the resident library and symbol table file to the target device
        area [1,1]

        Install the library if it is on the system device.  If it is not,
        then we can't for it could be on a kit for another processor.

        Install library on RSX-11M-PLUS

REM -- Common not in system 
INS -- Partition F7FCLS not in system, defaulting to GEN
        Copying FORTRAN-77 FCS OTS to LB:[1,1]

        Copying FORTRAN-77 RMS OTS to LB:[1,1]

        Copy files to correct locations

            FORTRAN-77 release notes

            FORTRAN-77 message file

            FORTRAN-77 compiler overlay descriptor file

            FORTRAN-77 compiler TKB command file

            FORTRAN-77 overlay descriptor file for the FCS OTS

            FORTRAN-77 overlay descriptor file for the RMS OTS

            FORTRAN-77 RSX-11S OTS

            FORTRAN-77 alternate convert module

            FORTRAN-77 extended instruction set module

            FORTRAN-77 alternate error reporting module

            FORTRAN-77 alternate I/O module

            FORTRAN-77 alternate random number generator

            FORTRAN-77 intrinsic mapping module

            File for building OTS resident libraries and vector

            File to exclude FORTRAN-77 OTS entry points

            File used in building OTS resident library vector

            Command file for building clustered FCS OTS

            TKB command file for clustered FCS OTS

            Clustered FCS OTS tailor file

            Command file for building non-clustered FCS OTS

            TKB command file for non-clustered FCS OTS

            Non-clustered FCS OTS tailor file

            Command file for FCS OTS linked against FCSFSL

            TKB file for FCS OTS linking against FCSFSL

            Tailor file for FCS OTS linked against FCSFSL

            Command file for building clustered RMS OTS

            TKB command file for clustered RMS OTS

            Clustered RMS OTS tailor file

            File needed to build FCS OTS resident libraries

        Copying F77.TSK to LB:[3,54]F77.TSK

Transferring files from work area.

Running IVP command procedure F77IVP.CMD.



    Test the compiler's ability to detect a compile time error

    The following error should be seen:

    F77 -- ERROR 28-E Overflow while converting constant or constant expression
                      [I = 71347] in module F77TST at line 6

    F77 -- 1 Error F77TST.FTN;1


   **************************** end of comment ********************************

F77 -- ERROR 28-E Overflow while converting constant or constant expression
		  [I = 71347] in module F77TST at line 6
F77 -- 1 Error  F77TST.FTN;1       	
 
        Task-build the test program



    Test the ability of the OTS to detect the run-time error.

    The following message should be displayed:

    NNNNNN  --  ERROR 73
    Floating zero divide
    at PC = xxxxxx
      in   "F77TST" at or after 6

    Where NNNNNN is the task name and xxxxxx is the actual program location



    **************************** end of comment ***************************

       Testing the FCS version of the FORTRAN-77 OTS

TT62  --  ERROR 73
Floating zero divide
at PC = 001740
  in   "F77TST" at or after 6

PDP-11 FORTRAN-77 INSTALLATION SUCCESSFUL!
TT62  --  STOP 

       Testing the RMS version of the FORTRAN-77 OTS

TT62  --  ERROR 73
Floating zero divide
at PC = 044234
  in   "F77TST" at or after 6

PDP-11 FORTRAN-77 INSTALLATION SUCCESSFUL!
TT62  --  STOP 

        Purging old files

Installation of F77 (F77) ending at 10-MAR-21 02:11:52.

Installation of F77 (F77) successful.

Auto-Install ended on 10-MAR-21 at 02:11:53.

>
