VAX-11/730

[Dan Williams]

On 4/22/05, Ethan Dicks <ethan.dicks at gmail.com> wrote:
> On 4/21/05, Ethan Dicks <ethan.dicks at gmail.com> wrote:
> > On 4/20/05, Christian R. Fandt <cfandt at netsync.net> wrote:
> > > Upon the date 22:44 19-04-05, Ethan Dicks said something like:
> > > >Hmm... I had no idea.  I have a several-inch-thick stack of prints for
> > > >the 11/730-Z...
> > >
> > > Ohhhh, I would like a copy of any 11/730 docs you may find!
> >
> > OK... I'll do some digging this month.
> 
> Boy, that was a short month... I happened to be next to one of my
> caches of DEC prints and lo and behold, the very 11/730-ZA print stack
> I was after.  It is about 2 cm thick, and contains mechanical drawings
> of the cable tray, prints for the PSU, TU58, CPU, and memory,
> schematics and PAL equations included.
> 
> It being B-sized drawings, I have no easy way to scan these... my
> hardware tops out at 8.5"x14".  Suggestions?
> 
> -ethan
> 
> 
See how much a print shop would charge to reduce it to A4. B+W
shouldn't be more than 1-2p a sheet.

Dan