Questions - Universe/68, HP-9134A,VT420 composite video

[Joe R.]

At 07:09 PM 4/18/05 -0400, you wrote:
>On 18 Apr 2005 at 12:27, David Comley wrote:
>
>> Does that flexible disc address come in to play if the unit is
>> configured as 4 x 1.15MB drives ? Perhaps I need to set that address
>> instead. 
>
>The 9133 (hard + 3.5" floppy), 9134 (hard only), and 9135 (hard + 5.25" 
>floppy) used the same controller, so the floppy address switches on the 
>9134 don't do anything.  They're active on the other two models.
>
>Although you may already know it, it's probably worth mentioning that the 
>64000 system hard disc must be at address 0, a system line printer must be 
>at address 1, stations must be at 2-7, and one of the stations (or the only 
>one) must have the rear-panel master/slave switches set to "master," 
>according to the 64000 configuration guide.


  Ahh! That's something that I didn't know. On the 9000 200 and 300s they
can use any unassigned address.

    Joe

>
>                                      -- Dave
>
>