Making CP/M disk images

[Gary Fisher]

I'm trying to do the same thing with some (downloaded) Teledisk images for an Altos 580 server which has a similar 96tpi floppy with no luck (a plea for help here).  

My limited understanding is that these drives use double density media and that a standard 1.2 mb drives don't work too well with that (the manuals all say that writing out 360k AKA 40 track disks on a 1.2mb is a bad thing).  Did you take the drive in the SB180 and put it in the Compaq, still calling it a 1.2, 360k or even a 720k 3.5?  I tried that with a different (SA-465) 96tpi drive jumpered as drive 1 and it seemed to write disks with no reported problems on the Teledisk write.  The Altos still didn't like the disk though but that might be a function of the original files (or something else I forgot to do).

Gary F.

------Oiginal below edited for brevity.-----
Message: 6
Date: Wed, 24 Nov 2004 19:48:18 -0500
From: "Richard A. Cini" <rcini at optonline.net>
Subject: RE: Making CP/M disk images
To: "'Dwight K. Elvey'" <dwight.elvey at amd.com>,	"'General Discussion:
	On-Topic and Off-Topic Posts'"	<cctalk at classiccmp.org>
Message-ID: <000801c4d288$74daad50$6501a8c0 at bbrk0oksry5qza>
Content-Type: text/plain; charset=us-ascii

Dwight:

	Interestingly, Teledisk did skip every other track. These are DSDD disks
formatted on the SB180 machine using the "40 track" option. The drive in the
SB180 is a 96TPI drive (HD) and the disk on the PC side is a standard 1.2mb.

	I'll have to see if Teledisk has any options that may address this. As I
recall, the number of configurable options was sparse, though.





This e-mail and any attachments may contain confidential and privileged information. If you are not the intended recipient, please notify the sender immediately by return e-mail, delete this e-mail and destroy any copies. Any dissemination or use of this information by a person other than the intended recipient is unauthorized and may be illegal. Unless otherwise stated, opinions expressed in this e-mail are those of the author and are not endorsed by the author's employer.