Making CP/M disk images

[Richard Lynch]

I've been able to create images of some Altos 580 disks using Teledisk 2.15,
then recreate the disks on DSDD media using the 1.2mb 5.25" drive on my 286.
If you can email me your images I'll see if I can make working copies on my
setup.
Richard

on 11/25/04 9:15 AM, Gary Fisher at GFisher at tristonecapital.com wrote:

> I'm trying to do the same thing with some (downloaded) Teledisk images for an
> Altos 580 server which has a similar 96tpi floppy with no luck (a plea for
> help here).  
> 
> My limited understanding is that these drives use double density media and
> that a standard 1.2 mb drives don't work too well with that (the manuals all
> say that writing out 360k AKA 40 track disks on a 1.2mb is a bad thing).  Did
> you take the drive in the SB180 and put it in the Compaq, still calling it a
> 1.2, 360k or even a 720k 3.5?  I tried that with a different (SA-465) 96tpi
> drive jumpered as drive 1 and it seemed to write disks with no reported
> problems on the Teledisk write.  The Altos still didn't like the disk though
> but that might be a function of the original files (or something else I forgot
> to do).
> 
> Gary F.
> 
> ------Oiginal below edited for brevity.-----
> Message: 6
> Date: Wed, 24 Nov 2004 19:48:18 -0500
> From: "Richard A. Cini" <rcini at optonline.net>
> Subject: RE: Making CP/M disk images
> To: "'Dwight K. Elvey'" <dwight.elvey at amd.com>, "'General Discussion:
> On-Topic and Off-Topic Posts'" <cctalk at classiccmp.org>
> Message-ID: <000801c4d288$74daad50$6501a8c0 at bbrk0oksry5qza>
> Content-Type: text/plain; charset=us-ascii
> 
> Dwight:
> 
> Interestingly, Teledisk did skip every other track. These are DSDD disks
> formatted on the SB180 machine using the "40 track" option. The drive in the
> SB180 is a 96TPI drive (HD) and the disk on the PC side is a standard 1.2mb.
> 
> I'll have to see if Teledisk has any options that may address this. As I
> recall, the number of configurable options was sparse, though.
> 
> 
> 
> 
> 
> This e-mail and any attachments may contain confidential and privileged
> information. If you are not the intended recipient, please notify the sender
> immediately by return e-mail, delete this e-mail and destroy any copies. Any
> dissemination or use of this information by a person other than the intended
> recipient is unauthorized and may be illegal. Unless otherwise stated,
> opinions expressed in this e-mail are those of the author and are not endorsed
> by the author's employer.
> 
> 
>