(S1523_INS.INX Installation Guide .INX file /Charlie) (1) (1) (_( )Installation_>procedure ) (_( )Installation_>Manual or automatic? ) (1) (2) (_( )Unmapped monitors ) (_( )SB monitor_>features of ) (_( )FB monitor_>features of ) (_( )Mapped monitors_>See also XM monitor, ZM monitor ) (_( )Monitors_>See also SB monitor, FB monitor, XM monitor, and ZM monitor ) (_( )Foreground{\slash }background monitor_>See FB monitor ) (_( )Single-job monitor_>See SB monitor ) (_( )Single-mapped monitor_>See XM monitor ) (_( )XB monitor_>See XM monitor ) (_( )ZB monitor_>See ZM monitor ) (_( )Fully-mapped monitor_>See ZM monitor ) (1) (3) (_( )Mapped monitors ) (_( )XM monitor_>features of ) (_( )ZM monitor_>features of ) (_( )Monitors_>distributed_>features available in (table) ) (_( )Monitors_>distributed_>choice of ) (1) (4) (_( )Customizations_>table of ) (_( )Monitors_>customizations available for (table) ) (_( )Installation_>customization_>features available through ) (1) (5) (1) (6) (1) (7) (1) (8) (1) (9) (1) (10) (1) (11) (_( )Reading path_>for installation ) (_( )Installation_>reading path for ) (1) (12) (2) (1) (_( )Installation_>preparation for ) (_( )Installation_>survey of procedures ) (2) (2) (_( )Software kit_>distributed components of ) (_( )Files_>distributed_>list of (table) ) (_( )Distribution kit_>files on (table) ) (_( )Monitors_>distributed_>list of (table) ) (_( )Device handlers_>list of (table) ) (_( )RT11AI.SYS monitor ) (_( )RT11MT.SYS monitor ) (_( )RT11SB.SYS monitor ) (_( )RT11FB.SYS monitor ) (_( )RT11XB.SYS monitor ) (_( )RT11XM.SYS monitor ) (_( )RT11ZB.SYS monitor ) (_( )RT11ZM.SYS monitor ) (_( )DL.SYS ) (_( )DLX.SYS ) (_( )DM.SYS ) (_( )DMX.SYS ) (_( )DU.SYS ) (_( )DUX.SYS ) (_( )DW.SYS ) (_( )DWX.SYS ) (_( )DX.SYS ) (_( )DXX.SYS ) (_( )DY.SYS ) (2) (3) (_( )DYX.SYS ) (_( )DZ.SYS ) (_( )DZX.SYS ) (_( )LD.SYS ) (_( )LDX.SYS ) (_( )LP.SYS ) (_( )LPX.SYS ) (_( )LS.SYS ) (_( )LSX.SYS ) (_( )MM.SYS ) (_( )MMX.SYS ) (_( )MS.SYS ) (_( )MSX.SYS ) (_( )MT.SYS ) (_( )MTX.SYS ) (_( )MU.SYS ) (_( )MUX.SYS ) (_( )NCX.SYS ) (_( )NL.SYS ) (_( )NLX.SYS ) (_( )NQX.SYS ) (_( )NUX.SYS ) (_( )PI.SYS ) (_( )PIX.SYS ) (_( )RK.SYS ) (_( )RKX.SYS ) (_( )SP.SYS ) (_( )SPX.SYS ) (_( )UBX.SYS ) (2) (4) (_( )VM.SYS ) (_( )VMX.SYS ) (_( )XC.SYS ) (_( )XCX.SYS ) (_( )XLX.SYS ) (_( )SL.SYS ) (_( )SLMIN.SYS ) (_( )SLX.SYS ) (_( )SWAP.SYS ) (_( )BINCOM.SAV ) (_( )BUP.SAV ) (_( )CREF.SAV ) (_( )DIR.SAV ) (_( )DUMP.SAV ) (_( )DUP.SAV ) (_( )EDIT.SAV ) (_( )FILEX.SAV ) (_( )FORMAT.SAV ) (_( )GIDIS.SAV ) (_( )HELP.SAV ) (_( )IND.SAV ) (_( )INDEX.SAV ) (_( )INDEXX.SAV ) (_( )KED.SAV ) (_( )KEX.SAV ) (_( )LIBR.SAV ) (2) (5) (_( )LINK.SAV ) (_( )MACRO.SAV ) (_( )MDUP.AI ) (_( )MDUP.MM ) (_( )MDUP.MS ) (_( )MDUP.MT ) (_( )MDUP.MU ) (_( )MDUP.SAV ) (_( )MONMRG.SAV ) (_( )MSCPCK.SAV ) (_( )PAT.SAV ) (_( )PIP.SAV ) (_( )QUEMAN.SAV ) (_( )QUEUE.REL ) (_( )RESORC.SAV ) (_( )SETUP.SAV ) (_( )SIPP.SAV ) (_( )SLP.SAV ) (_( )SPOOL.REL ) (_( )SPOOL.SAV ) (_( )SRCCOM.SAV ) (_( )TRANSF.SAV ) (_( )UCL.SAV ) (_( )VTCOM.REL ) (_( )VTCOM.SAV ) (_( )BATCH.SAV ) (_( )ERROUT.SAV ) (_( )INDEX.IDX ) (2) (6) (_( )INDEXA.IMG ) (_( )INDEXB.IMG ) (_( )MSB.COM ) (_( )MTB.COM ) (_( )MUB.COM ) (_( )RTFB.MAP ) (_( )RTSB.MAP ) (_( )RTXM.MAP ) (_( )RTZM.MAP ) (_( )STRTFB.COM ) (_( )STRTSB.COM ) (_( )STRTXB.COM ) (_( )STRTXM.COM ) (_( )STRTZB.COM ) (_( )STRTZM.COM ) (_( )V5USER.TXT ) (_( )System generation_>list of files for (table) ) (_( )SYSGEN.COM ) (_( )SBFB.ANS ) (_( )XB.ANS ) (_( )XM.ANS ) (_( )XMEL.ANS ) (_( )ZB.ANS ) (_( )ZM.ANS ) (_( )Auto installation file_>list of (table) ) (_( )IVP.MAP ) (_( )STRTAI.COM ) (_( )TERMID.SAV ) (2) (7) (_( )VERIFY.COM ) (_( )Debuggers_>list of (table) ) (_( )DBGSYM.SAV ) (_( )ODT.OBJ ) (_( )SDH.SYS ) (_( )SDHX.SYS ) (_( )SDS.SYS ) (_( )SDSX.SYS ) (_( )VDT.OBJ ) (_( )Graphics_>list of files for (table) ) (_( )ALPH00.FNT ) (_( )Libraries_>list of (table) ) (_( )Subroutines_>list of (table) ) (_( )EDTG.MAC ) (_( )SYSLIB.OBJ ) (_( )SYSMAC.SML ) (_( )SYSTEM.MLB ) (_( )Bootstrap_>magtape_>list of (table) ) (_( )MBOOT.BOT ) (_( )MBOT16.BOT ) (_( )MSBOOT.BOT ) (_( )Demonstration programs_>list of (table) ) (_( )DEMOB1.BAS ) (_( )DEMOBG.MAC ) (_( )DEMOFG.MAC ) (_( )DEMOF1.FOR ) (_( )DEMOF2.FOR ) (_( )DEMOF3.FOR ) (_( )DEMOKD.TXT ) (_( )DEMOM1.MAC ) (2) (8) (_( )Source files_>list of (table) ) (_( )BA.MAC ) (_( )BSTRAP.MAC ) (_( )DL.MAC ) (_( )DM.MAC ) (_( )DU.MAC ) (_( )DW.MAC ) (_( )DX.MAC ) (_( )DY.MAC ) (_( )DZ.MAC ) (_( )EDTG.MAC ) (_( )EL.MAC ) (_( )ELCOPY.MAC ) (_( )ELINIT.MAC ) (_( )ELTASK.MAC ) (_( )ERROUT.OBJ ) (_( )ERRTXT.MAC ) (_( )FB.MAC ) (_( )FSM.MAC ) (_( )KMON.MAC ) (_( )KMOVLY.MAC ) (_( )LD.MAC ) (_( )LP.MAC ) (_( )LS.MAC ) (_( )MTTEMT.MAC ) (_( )MTTINT.MAC ) (_( )NC.MAC ) (_( )NI.MAC ) (2) (9) (_( )NL.MAC ) (_( )NQ.MAC ) (_( )NU.MAC ) (_( )RK.MAC ) (_( )RMON.MAC ) (_( )SP.MAC ) (_( )TJ.MAC ) (_( )TM.MAC ) (_( )TRMTBL.MAC ) (_( )TS.MAC ) (_( )TT.MAC ) (_( )TU.MAC ) (_( )UM.MAC ) (_( )USR.MAC ) (_( )VM.MAC ) (_( )XB.MAC ) (_( )XC.MAC ) (_( )XL.MAC ) (_( )XM.MAC ) (_( )XMSUBS.MAC ) (_( )ZB.MAC ) (_( )ZM.MAC ) (_( )Unsupported software_>list of (table) ) (_( )CONFIG.COM ) (_( )CONFIG.SAV ) (_( )CONSOL.MAC ) (_( )CUSTOM.TXT ) (_( )DATIME.MAC ) (2) (10) (_( )DATIME.SAV ) (_( )NITEST.MAC ) (_( )RTMON.REL ) (_( )SPLIT.SAV ) (_( )TRANSF.EXE ) (_( )TRANSF.TSK ) (_( )V5NOTE.TXT ) (_( )VBGEXE.SAV ) (_( )Working system_>selecting components for ) (2) (11) (_( )Diskettes_>sizes of (table) ) (_( )RX01 diskette_>size of ) (_( )RX01 diskette_>device name ) (_( )RX02 diskette_>size of ) (_( )RX02 diskette_>device name ) (_( )RX50 diskette_>size of ) (_( )RX50 diskette_>device name ) (_( )Virtual memory_>size of ) (_( )Virtual memory_>device name ) (_( )DIRECTORY command ) (_( )Directory listings_>reading ) (_( )Handlers_>See Device handlers ) (2) (12) (_( )Monitors_>selection of for working system ) (_( )SWAP.SYS_>need for ) (_( )Device handlers_>choosing for working system ) (_( )System Library_>See SYSLIB.OBJ ) (2) (13) (_( )Device handlers_>choosing for peripheral devices ) (_( )SYSLIB.OBJ_>need for ) (_( )HELP package ) (_( )Line printer handlers_>choosing for working system ) (_( )LP.SYS_>choosing ) (_( )LP.SYS _>renaming ) (_( )LS.SYS_>choosing ) (_( )LS.SYS_>renaming ) (_( )MACRO assembler_>files required for ) (_( )Keypad editor_>See KED.SAV ) (_( )Editors_>See Text editors ) (2) (14) (_( )QUEUE.REL_>choosing for working system ) (_( )QUEMAN.SAV_>choosing for working system ) (_( )SPOOL.REL_>choosing for working system ) (_( )Source files_>choosing for working system ) (_( )Indirect command files_>start-up_>choosing for working system ) (_( )Text editors_>choosing for working system ) (_( )Utility programs_>choosing for working system ) (2) (15) (_( )Components_>arranging on small working system ) (_( )Devices_>assigning default to data ) (_( )Default device_>assigning ) (_( )Utility programs_>creating volume for ) (_( )Utilities volume_>creating a ) (2) (16) (_( )System volume_>including overlaid utilities ) (_( )Overlaid utilities_>on system volume ) (_( )Working system_>for Introduction to \:{RT--11} ) (2) (17) (_( )Demonstration programs_>creating volumes for ) (_( )Introduction to \:{RT--11}_>creating volumes for ) (_( )Software customizations_>choosing ) (2) (18) (_( )CUSTOM.TXT_>customization symbol values ) (_( )Monitor map files_>customization symbol values ) (_( )SIPP.SAV_>installing customization symbol values ) (_( )Software customizations_>getting symbol values for ) (_( )Software customizations_>using CUSTOM.TXT with ) (_( )Customizations_>software_>getting symbol values for ) (_( )Customizations_>for distributed monitors ) (_( )Software customizations ) (_( )Monitors_>customizations available for_>descriptions of ) (_( )SRCCOM_>changing insertion{\slash }deletion characters used by ) (_( )SRCCOM_>{\slash }D option ) (_( )DIFFERENCES{\slash }CHANGEBAR command ) (2) (19) (_( )Terminals_>changing default output from printer to ) (_( )LD_>Handler suffix customization ) (_( )..BLDS ) (_( )DIR_>changing default number of columns in ) (_( )Directory listings_>changing default number of columns in ) (2) (20) (_( )DIR_>changing default order of listings ) (_( )SWS ) (_( )Directory listings_>sorting_>changing default of ) (_( )Program sections_>See P-sects ) (2) (21) (_( )P-sects_>absolute base address_>changing number of ) (_( )Absolute base address p-sects_>changing number of ) (_( )QSWNUM ) (_( )LINK_>changing size of library module list of ) (_( )Library modules_>increasing number of for LINK ) (_( )LINK_>changing size of library module list ) (2) (22) (_( )LMLSIZ ) (_( )DIBOL_>LINK change requirement ) (_( )QUEUE work file_>changing size of ) (_( )QUEUE.REL_>changing size of work file ) (_( )QSIZE ) (_( )EDIT_>with nonstandard ESCAPE codes ) (_( )ALTMDE ) (2) (23) (_( )Devices_>installing nonstandard ) (2) (24) (_( )Device handlers_>renaming ) (_( )Device handlers_>when bootstrap doesn't install ) (_( )Line printer handlers_>changing CSR addresses in ) (_( )Line printer handlers_>changing vectors in ) (_( )MSCP disks_>changing CRS addresses in ) (_( )MSCP disks_>changing vectors in ) (_( )MSCP disks_>assigning unit numbers to ) (_( )MSCP disks_>partitioning ) (_( )Device handlers_>controller installed at nonstandard address ) (2) (25) (_( )Magtapes_>hardware_>installing support for ) (_( )Hardware magtapes_>installing support for ) (_( )MTHD.SYS hardware magtape handler ) (_( )MTHDX.SYS hardware magtape handler ) (_( )MSHD.SYS hardware magtape handler ) (_( )MSHDX.SYS hardware magtape handler ) (_( )MMHD.SYS hardware magtape handler ) (_( )MMHDX.SYS hardware magtape handler ) (2) (26) (_( )Magtapes_>handler files (table) ) (_( )Handler files_>magtape (table) ) (2) (27) (_( )Magtapes_>changing parity and density of ) (_( )Parity_>changing for magtape ) (_( )Density_>changing for magtape ) (_( )BATCH_>modifying to save disk space ) (2) (28) (_( )LINK_>modifying to change default SYSLIB device ) (_( )SYSLIB.OBJ_>changing default device of ) (_( )SYSLIB_>customization patch symbol ) (_( )HELP.TXT_>creating from HELP.SAV ) (_( )HELP.EXE_>creating from HELP.SAV ) (_( )Help text_>modifying ) (2) (29) (2) (30) (_( )Errors_>fatal_>preventing reset from ) (_( )Fatal errors_>preventing reset from ) (_( )FATAL ) (2) (31) (_( )Bootstrapping the system_>in less than 16K words ) (_( )Memory_>running in less than available ) (_( )BHALT ) (2) (32) (_( )VTCOM_>setting default DIAL string ) (_( )VTCOM_>setting default DIAL string ) (_( )..DIAL ) (_( )DIAL command_>using with VTCOM ) (2) (33) (_( )Files_>size of_>setting upper limit on ) (_( )\$RMON ) (2) (34) (_( )BUP_>Changing acceptable number of bad blocks ) (_( )..MBAD ) (_( )IND_>Changing default file type ) (_( )..INDF ) (2) (35) (_( )Memory_>size of_>setting upper limit on ) (_( )..28KW ) (_( )Bootstrap message_>suppressing ) (_( )..SLNT ) (_( )Indirect command files_>start-up_>suppressing ) (2) (36) (_( )..NIND ) (_( )Indirect command files_>start-up_>suppressing echo ) (_( )..TTQU ) (_( )Bootstrap message_>changing ) (_( )BSTRNG ) (_( )Indirect command files_>changing default device for ) (_( )Default device_>changing for indirect command files ) (2) (37) (_( )..ATDK ) (_( )Indirect command files_>file type_>changing default ) (_( )File types_>default_>changing for indirect command files ) (_( )..ATFX ) (_( )FRUN keyboard command_>changing default device for ) (_( )Default device_>changing for FRUN command ) (_( )..FRDK ) (2) (38) (_( )File types_>default_>changing for FRUN command ) (_( )FRUN keyboard command_>file type_>changing default ) (_( )..FRUX ) (_( )EDIT keyboard command_>file type_>changing default ) (_( )Default device_>changing for EDIT command ) (_( )..EDDV ) (2) (39) (_( )EDIT keyboard command_>changing default file name for ) (_( )PROGDF ) (_( )E keyboard command_>use of above background job ) (_( )D keyboard command_>use of above background job ) (_( )Monitors_>examining ) (_( )Monitors_>depositing in ) (_( )I/O page_>examining ) (_( )I/O page_>depositing in ) (_( )..EMON ) (_( )Default device_>changing for QUEMAN ) (_( )QUEMAN_>changing default device for ) (2) (40) (_( )..QULP ) (_( )Indirect command files_>nesting_>changing depth ) (_( )Nesting depth_>indirect command files_>changing ) (_( )Ring buffer_>output_>increasing space requirement in to resume job ) (_( )Output ring buffer_>increasing space requirement in to resume job ) (2) (41) (_( )..TTON ) (_( )Directory segments_>changing default number of ) (2) (42) (_( )SEGTBL ) (_( )Banner pages_>changing default width of ) (_( )..NB1 ) (2) (43) (_( )..NB2 ) (_( )..NB3 ) (_( )LINK_>modifying listing page length ) (_( )Load maps_>changing default page length for ) (_( )LINPPG ) (_( )HELP file_>changing default device for ) (_( )HELP file_>changing default file name for ) (_( )..HELF ) (2) (44) (_( )IND_>changing default device for ) (_( )..INDN ) (_( )Bad block replacement_>in user-written handlers ) (_( )ARDPS ) (2) (45) (_( )Device handlers_>user-written_>bad block replacement for ) (_( )SRDPS ) (_( )Magtapes_>user-written handlers for ) (_( )MTDPS ) (_( )PIPMT ) (2) (46) (_( )MDUPMT ) (_( )Device handlers_>user-written_>for magtapes ) (_( )IND_>Eliminating or changing terminating message ) (2) (47) (_( )LD_>changing default logical disk file type ) (_( )..LDEX ) (_( )QUEUE_>allowing first form feed ) (_( )..DOFF ) (2) (48) (_( )MACRO assembler_>changing page listing length ) (_( )PGSIZE ) (_( )CREF_>changing page listing length ) (_( )IND_>changing default to ) (_( )..INDR ) (_( )Indirect command files_>using IND with ) (2) (49) (_( )KEX_>limiting memory requested by ) (_( ).SETTOP programmed request_>used with KEX ) (_( )..MAXM ) (_( )MACRO assembler_>changing default .LIST{\slash }.NLIST options ) (2) (50) (_( )LCBITS ) (_( )MACRO assembler_>changing default .ENABLE{\slash }.DISABLE options ) (_( )EDBITS ) (2) (51) (_( )KED_>modifying default file type ) (_( )SPOOL.SYS_>created by SPOOL.REL ) (_( )SPOOL.REL_>changing work file size ) (_( )..SPSZ ) (2) (52) (_( )SPOOL.REL_>changing output device ) (_( )..SPSO ) (_( )LINK_>changing default output to 132-column ) (_( )MACRO assembler_>increasing default work file size of ) (_( )WRKSIZ ) (2) (53) (_( )UCL_>changing name and default device for ) (_( )..UCLD ) (_( )IND_>suppressing dynamic allocation of a region for ) (_( )..ALRG ) (2) (54) (_( )UCL_>changing size of ) (_( )..CMDS ) (_( )VTCOM_>changing default send speed of ) (_( )..FAST ) (_( )SEND_>VTCOM_>changing default speed ) (2) (55) (_( )SYSMAC.SML_>modifying system macro library ) (_( )System macro library_>modifying SYSMAC.SML ) (_( )VTCOM_>dial string_>modifying default prefix of ) (_( )..DPFX ) (2) (56) (_( )VTCOM_>dial string_>modifying default suffix of ) (_( )..DSFX ) (2) (57) (_( )KED_>Automatic journaling ) (_( )KEX_>Automatic journaling ) (_( )..JOU ) (2) (58) (_( )KED_>Adjusting journal file size ) (_( )KEX_>Adjusting journal file size ) (_( )..JSIZ ) (_( )ODT_>creating a monitor-independent ) (2) (59) (_( )KED_>Forcing a journal device ) (_( )KEX_>Forcing a journal device ) (_( )..JDEV ) (2) (60) (_( )KED_>Modifying storage capacity for LEARN ) (_( )KEX_>Modifying storage capacity for LEARN ) (_( )..MACS ) (_( )KED_>Modifying maximum LEARNs ) (_( )KEX_>Modifying maximum LEARNs ) (2) (61) (_( )..MACN ) (_( )KED_>Restoring LOCAL form feed ) (_( )KEX_>Restoring LOCAL form feed ) (_( )..LCFF ) (2) (62) (_( )Single-line command editor_>Removing JSW bit 6 check ) (_( )..SLCN ) (_( )SLMIN_>Removing JSW bit 6 check ) (2) (63) (_( )Single-line command editor_>Changing edit mode to REPLACE ) (_( )..IRDF ) (_( )..IRDX ) (_( )SLMIN_>Changing edit mode to REPLACE ) (_( )..IRDM ) (2) (64) (_( )VTCOM_>Changing command mode character ) (_( )..LCCH ) (_( )CONFIG_>RMON fixed offset 300_>\$FBMON bit ) (_( )\$FBMON bit ) (2) (65) (_( )SET MODE NOSJ ) (_( )SET MODE SJ ) (_( )LINK_>Making {\slash }G option a default ) (_( )..GON ) (2) (66) (_( )Magtapes_>Changing default label size ) (_( )Magtapes_>Also see Magtape distribution kit ) (_( )..MTLS ) (3) (1) (_( )Installation_>RX01 distribution to small device ) (_( )RX01 distribution kit_>installing on small devices ) (_( )Distribution kit_>RX01_>installing on small devices ) (_( )Diskettes_>installing system to run on ) (_( )RX01 distribution kit_>to small device ) (_( )RX01 distribution kit_>bootstrapping distribution volume ) (3) (2) (_( )RX01 distribution kit_>initializing backup volumes ) (3) (3) (_( )Working system_>on small device_>creating from RX01 ) (3) (4) (_( )RX01 distribution kit_>copying bootstrap to system volume ) (_( )Bootstrap_>installing on working system ) (_( )Working system_>on small device_>installing customizations on ) (_( )RX01 distribution kit_>Customizing ) (3) (5) (_( )RX01 distribution kit_>squeezing system volume ) (_( )RX01 distribution kit_>unprotecting backup volumes ) (3) (6) (_( )Working system_>on small device_>backing up ) (_( )Working system_>on small device_>test of installation ) (_( )Installation_>test of working system on small device ) (3) (7) (3) (8) (3) (9) (3) (10) (4) (1) (_( )RX01 distribution kit_>if SYSGEN required ) (_( )RX01 distribution kit_>installing on disk ) (_( )Distribution kit_>RX01_>installing on disk ) (_( )Installation_>RX01 distribution to disk ) (_( )RX01 distribution kit_>installing_>bootstrapping distribution volume ) (4) (2) (_( )RX01 distribution kit_>copying distribution to system disk ) (4) (3) (4) (4) (_( )Working system_>on disk_>creating from RX01 ) (4) (5) (_( )Working system_>on disk_>installing bootstrap on ) (_( )Bootstrap_>installing on working system ) (4) (6) (_( )Working system_>on disk_>installing customizations on ) (_( )Working system_>on disk_>compressing ) (_( )Working system_>on disk_>protecting ) (4) (7) (_( )Working system_>on disk_>backing up ) (4) (8) (_( )Working system_>on disk_>test of installation ) (_( )Installation_>test of working system on disk ) (4) (9) (4) (10) (4) (11) (4) (12) (4) (13) (4) (14) (_( )RX01 distribution kit_>if SYSGEN required ) (5) (1) (_( )Disk distribution kit_>installing on disk ) (_( )Installation_>disk distribution kit to disk ) (_( )Distribution kit_>disk_>installing on disk ) (_( )Disk distribution kit_>installing_>bootstrapping distribution volume ) (_( )Disk distribution kit_>bootstrapping ) (5) (2) (_( )Disk distribution kit_>backing up ) (5) (3) (_( )Disk distribution kit_>initializing backup volume ) (5) (4) (_( )Disk distribution kit_>copying bootstrap to system volume ) (_( )Disk distribution kit_>unprotecting backup volumes ) (_( )Working system_>on disk_>creating from disk ) (5) (5) (_( )Working system_>on disk_>installing bootstrap on ) (_( )Bootstrap_>installing on working system ) (_( )Working system_>on disk_>installing customizations on ) (5) (6) (_( )Working system_>on disk_>compressing ) (_( )Working system_>on disk_>backing up ) (5) (7) (_( )Working system_>on disk_>test of installation ) (_( )Installation_>test of working system on disk ) (5) (8) (5) (9) (5) (10) (5) (11) (5) (12) (_( )Disk distribution kit to disk_>if SYSGEN required ) (6) (1) (_( )Installation_>disk distribution kit to small device ) (_( )Disk distribution kit_>installing on small device ) (_( )Diskettes_>installing system to run on ) (_( )Distribution kit_>disk_>installing on small device ) (_( )Disk distribution kit_>bootstrapping ) (6) (2) (_( )Disk distribution kit_>backing up ) (6) (3) (_( )Disk distribution kit_>initializing backup volume ) (6) (4) (_( )Disk distribution kit_>copying bootstrap to system volume ) (_( )Disk distribution kit_>unprotecting backup volumes ) (_( )Working system_>on small device_>creating from disk ) (_( )RX50 diskette_>initializing ) (6) (5) (_( )RX01 diskette_>initializing and formatting ) (_( )RX02 diskette_>initializing and formatting ) (6) (6) (_( )Bootstrap_>installing on diskette ) (_( )Working system_>on small device_>installing bootstrap on ) (6) (7) (_( )Working system_>on small device_>installing customizations on ) (_( )Working system_>on small device_>compressing ) (6) (8) (_( )Working system_>on small device_>backing up ) (6) (9) (_( )Working system_>on small device_>test of installation ) (_( )Installation_>test of working system on small device ) (6) (10) (6) (11) (6) (12) (6) (13) (6) (14) (_( )Disk distribution kit to small device_>if SYSGEN required ) (7) (1) (_( )RX02 distribution kit_>installing on RX02 ) (_( )Installation_>RX02 distribution kit to RX02 ) (7) (2) (_( )RX02 distribution kit_>bootstrapping ) (7) (3) (_( )Working system_>on RX02_>creating from RX02 ) (7) (4) (7) (5) (_( )Bootstrap_>installing on RX02 ) (_( )Working system_>on RX02_>installing bootstrap on ) (_( )Working system_>on RX02_>installing customizations on ) (_( )Working system_>on RX02_>compressing ) (7) (6) (_( )Working system_>on RX02_>backing up ) (7) (7) (_( )Installation_>test of working system on RX02 ) (_( )Working system_>on RX02_>test of installation ) (7) (8) (7) (9) (7) (10) (7) (11) (7) (12) (7) (13) (_( )RX02 distribution kit_>installing on RX02_>if SYSGEN required ) (8) (1) (_( )Magtape distribution kit_>installing on disk ) (_( )Distribution kit_>magtape_>installing on disk ) (_( )Installation_>magtape distribution kit to disk ) (8) (2) (_( )MSBOOT.BOT ) (_( )magtape distribution kit_>bootstrapping ) (_( )MDUP.MT ) (_( )MDUP.MS ) (_( )MDUP.MM ) (_( )MDUP.MU ) (8) (3) (8) (4) (_( )Magtape distribution kit_>preserving ) (8) (5) (_( )MTB.COM ) (_( )MSB.COM ) (8) (6) (_( )MUB.COM ) (_( )Magtapes_>Creating a master (distribution) ) (_( )Working system_>on disk_>creating from magtape ) (8) (7) (_( )Bootstrap_>installing on working system ) (_( )Working system_>on disk_>installing customizations on ) (_( )Working system_>on disk_>compressing ) (8) (8) (_( )Working system_>on disk_>backing up ) (8) (9) (8) (10) (_( )Working system_>on disk_>test of installation ) (8) (11) (8) (12) (8) (13) (8) (14) (8) (15) (_( )magtape distribution kit_>if SYSGEN required ) (9) (1) (_( )Professional 300 Series_>installing on ) (_( )RX50 distribution kit_>installing on Professional 300 Series ) (_( )Distribution kit_>RX50_>installing on Professional 300 Series ) (9) (2) (_( )Professional 300 Series_>installing on_>formatting hard disk ) (_( )Professional 300 Series_>installing on_>bootstrapping system diskette ) (9) (3) (_( )Professional 300 Series_>installing on_>installing bootstrap on system disk ) (_( )Professional 300 Series_>installing on_>copying distribution to system disk ) (9) (4) (_( )Professional 300 Series_>installing on_>creating working system ) (_( )Working system_>on Professional 300 Series ) (_( )Professional 300 Series_>installing on_>customizing the system ) (_( )Professional 300 Series_>installing on_>compressing system disk ) (9) (5) (_( )Working system_>on Professional 300 Series_>backing up ) (9) (6) (_( )Working system_>on Professional 300 Series_>testing installation ) (_( )Professional 300 Series_>installing on_>testing working system ) (9) (7) (9) (8) (9) (9) (9) (10) (9) (11) (_( )Professional 300 Series_>installing on_>if SYSGEN required ) (A) (1) (_( )MDUP.MM_> device support ) (_( )MDUP.MS_>device support ) (_( )MDUP.MT_>device support ) (_( )MDUP.SAV_>nonstandard device support,modifying for ) (A) (2) (B) (1) (_( )Bootstrap_>loading software ) (_( )TMSCP bootstrap_>loading using MICRO-ODT ) (B) (2) (_( )TMSCP bootstrap_>loading using switch register ) (B) (3) (_( )TMSCP bootstrap_>address and contents of ) (B) (4) (_( )MSCP bootstrap ) (_( )MSCP bootstrap_>loading using MICRO-ODT ) (B) (5) (_( )MSCP bootstrap_>loading using switch register ) (B) (6) (_( )MSCP bootstrap_>address and contents of ) (B) (7) (_( )RK11 DECpack_>See RK05 ) (B) (8) (_( )RK05_>loading bootstrap ) (_( )Bootstrap loader_>RK05 address and contents ) (B) (9) (_( )RX11_>loading bootstrap ) (_( )Bootstrap loader_>RX11 address and contents ) (B) (10) (_( )TJU16_>loading bootstrap ) (_( )TM11_>loading bootstrap ) (B) (11) (_( )Bootstrap loader_>TJU16 address and contents ) (_( )Bootstrap loader_>TM11 address and contents ) (B) (12) (_( )RK07_>loading bootstrap ) (_( )RK06_>loading bootstrap ) (B) (13) (_( )Bootstrap loader_>RK06 address and contents ) (_( )Bootstrap loader_>RK07 address and contents ) (B) (14) (_( )RL01_>loading bootstrap ) (_( )RL02_>loading bootstrap ) (_( )Bootstrap loader_>RL01 address and contents ) (_( )Bootstrap loader_>RL02 address and contents ) (B) (15) (_( )RX211_>loading bootstrap ) (B) (16) (_( )Bootstrap loader_>RX211 address and contents ) (B) (17) (_( )TSV05 handler_>loading bootstrap_>MICRO-ODT ) (B) (18) (_( )Bootstrap loader_>TSV05 address and contents ) (_( )TSV05 handler_>loading bootstrap_>switch register ) (B) (19)