;	odsacpBLD.CMD
;
; Build entirely memory resident F11ACP (odsacp) for RSX11M/M+.
; This version does not have any overlays nor does it require
; special executive support such as memory management directives.
;
; Since this thing is over 8K words minimum it is not supported
; on unmapped system (obviously).
;
; ON AN RSX-11M-PLUS SYSTEM
; Created by SYSGEN3.CMD VERSION 03.01
;
;	Name - odsacp
;
lb:[1,54]odsacp/-IP/AC/MM/CP/-FP/-MU/-PM,MP:[4,34]odsacp/SP/MA/cr=
;
ou:[4,10]ods/LB:F11ACP:F11CM:F11BUF:SMCOM:DISPAT:DIRBUF:FIOSUB
ou:[4,10]ods/LB:ARWVB:INIT:MXQIO:SMRVB
ou:[4,10]ods/LB:ALLOC:BLXIO:CKSUM:CLACC:CLDAC:GTFID
ou:[4,10]ods/LB:ATCTL:DATIM:RATCM:RWATT:WATCM
ou:[4,10]ods/LB:CLATT:CLDIR:GTMAP:gtrtp
ou:[4,10]ods/LB:DARITH:DRGET:DELCK
ou:[4,10]ods/LB:INFCB:MPHDR:MPVBN:NXHDR:PROCK:RDHDR:RLEAS
ou:[4,10]ods/LB:RLFCB:RW1LB:SCFAC:SCFCB:WITRN:WRHDR:WTRN1
ou:[4,10]ods/LB:DRINI:DRPAC:DRSEF:DRVLB:DWPND:FDRMV
ou:[4,10]ods/LB:LOCAT:MATNAM:SMNXB:WACCK
ou:[4,10]ods/LB:ACCESS:DEACC
ou:[4,10]ods/LB:CLNUP:CLFCB:CLCOM
ou:[4,10]ods/LB:RDATT:RWVB:RWVBL
ou:[4,10]ods/LB:FNDNM:DREX:DRACC:INWIN
ou:[4,10]ods/LB:DRCPY:DMOUNT
ou:[4,10]ods/LB:CNTRL:MOUNT:MOUNT0:MOUNT1:MOUNT2
ou:[4,10]ods/LB:CDTTA:CATDT:MONTB:DIVD:DIVQ
LB:[1,1]EXELIB/LB
lb:[1,54]RSX11M.STB/SS
/
;
TASK=odsACP
STACK=50
UNITS=1
UIC=[1,1]
PRI=149
PAR=GEN:0:0
IDENT=06.00
TSKV=.SSTVC:7
;
; ===================================================
;              NOTE BENE
; PSECTs below $$BUF3 must map completely below 160000
;
; ===================================================
; Allocate a separate buffer for index file bitmap.
;
; If you've memory to burn, enable the EXTSCT=$$BUF0:1006.
;
EXTSCT=$$BUF0:1006
;
; Allocate a separate buffer for file headers.
;
; Always enable the EXTSCT=$$BUF1:1006 if possible.
;
EXTSCT=$$BUF1:1006
;
; Allocate private FCB pool space.
;
; The value of the EXTSCT determine the size of the
; internal FCB pool which doesn't help performance
; but cuts down on the use of system pool.  The optimum
; size is the size of an FCB (about 54(8)) times the
; number of files open plus preaccessed directories (LRU).
;
EXTSCT=$$AFR1:3300
;
; Extend the directory buffer.
;
; The EXTSCT=$$BUF3 determines the number of additional
; blocks of directory buffer to allocate.  Determine the
; size of the most frequently used directories and then
; extend $$BUF3 by that value minus one times the block
; size (1000(8)).
;
EXTSCT=$$BUF3:2000
;
/