PROFF User's Guide Version 1.0 *** ******* *** ********* ** ** ** ** ********* ******* ** ** ** ****** **** Ozan S. Yigit & Steven Tress March 1984 1.0 Proff User's Guide 1 11..00 IInnttrroodduuccttiioonn This manual describes PROFF, a formatter based on the FORMAT utility presented in _S_o_f_t_w_a_r_e _T_o_o_l_s_. PROFF was produced to provide a powerful formatter that can be used under a variety of microcomputers, thus providing a consistent formatting tool across environments. PROFF can be used to format memos, reports, form letters and documents such as this manual. It can also be configured to mimic other formatting systems of similar nature. This document itself was produced with PROFF, using most of its advanced features. PROFF took care of such things as auto-paragraphing and the production of the Table of Contents as the manual was being formatted. PROFF was developed under a Digital Equipment Corporation Rainbow 100, using Mark Williams C Compiler for portability reasons. PROFF is available under VAX/VMS operating system. PROFF implementations for IBM PC and APPLE ][ microcomputers are also underway. Rainbow, VAX/VMS are trademarks of Digital Equipment Corporation. Mark Williams C Compiler is a trademark of Mark Williams Company. IBM is a registered trademark of International Business Machines Inc. APPLE is a trademark of Apple Computer Inc. UNIX is a trademark of Bell Laboratories. 1.0 Proff User's Guide 2 22..00 GGeenneerraall DDeessccrriippttiioonn 22..11 TThhee IInnppuutt The text that is to be formatted by PROFF is typed into an input file using any text editor. This file contains the text to be formatted as well as PROFF commands. Each line in the input file is either a command line or a text line. A command line is a line that begins with a period ("."). All other lines are text lines. The command lines are not printed - they tell PROFF how you want it to format the text that follows. Appendix A summarizes all of the PROFF commands for a quick reference. 22..11..11 TTeexxtt Text can be entered into the input file in any format. PROFF removes all extra blanks and tabs between words when operating in fill mode. This means you do not have to worry about how many words you put on a line, and you can break lines wherever it is convenient to your typing. Note however, that you cannot break a word between two lines. Blanks and tabs at the beginning of a line are not removed. This is useful for producing special tables and performing special types of indentation. Thus, normal text lines should not have any leading tabs or blanks. 22..11..22 CCoommmmaannddss A command is a line that starts with a period. Immediately following the period is a command name. Some commands accept a numeric quantity or a character string parameter, which must be separated from the command name by a space or a comma. For example, an indent command might appear as follows: | |It is to do nothing that the elect exists. |.in 5 |- Oscar Wilde | Assuming that the left margin was at column 1, PROFF would produce the following: | |It is to do nothing that the elect exists. | - Oscar Wilde | (In the examples above, as in those following, the vertical 1.0 Proff User's Guide 3 line indicates the left edge of input or the left edge of the printed page). The number following the command may be preceeded by a "+" or "-" sign. This plus or minus sign indicates an addition or subtraction of the number to or from the current value for the command. for example, the text: | |Nothing to do but work, |.in +3 |Nothing to eat but food, |.in -3 |Nothing to wear but clothes |.in +3 |To keep one from going nude. |.in +7 |-Benjamin King | will produce as output: | |Nothing to do but work, | Nothing to eat but food, |Nothing to wear but clothes | To keep one from going nude. | -Benjamin King | If a number is not supplied with a command that requires a number, PROFF will use a default value. The defaults for each command are summarized in Appendix A. 22..22 TThhee OOuuttppuutt The main functions performed by PROFF are _f_i_l_l_i_n_g and _j_u_s_t_i_f_y_i_n_g_. A line is filled by packing as many words onto it as will fit. The line is justified by spacing words evenly between the left and right margins. When PROFF starts, it assumes that the text is to be filled and justified. Of course, when fill and justify are not needed (as in the case of a letter or a table), there are commands to turn these features off, and back on again, as necessary. When PROFF is in fill mode, it normally strips out extra spaces and tabs between words. Many PROFF commands cause a _b_r_e_a_k to occur in the output. This means that the line currently being filled is immediately output. Any following text goes into a new output line. 1.0 Proff User's Guide 4 22..33 EExxeeccuuttiinngg PPRROOFFFF Once a text file is ready for formatting, PROFF is started by typing the program name, various options, name of the input file and the name of the output file. For example the command A> proff -po5 proffman.prf proff.man would produce this document as proff.man, from an input file proffman.prf, shifted right by 5 spaces. (The symbol "A>" is CP/M system prompt). 22..44 BBiibblliiooggrraapphhiicc NNootteess PROFF wa produced by re-writing the Software Tools Formatter FORMAT. Some of the ideas are from Freshwater Institute RUNOFF, NROFF, University of Waterloo SCRIPT and other formatters of similar nature. The underlying ideas of the mentioned above formatters may be found in _S_o_f_t_w_a_r_e _T_o_o_l_s by B.W. Kernighan and P.J. Plauger. 1976. (Addison-Wesley, Reading, Mass.). 22..55 RReeffeerreenncceess aanndd RReeaaddiinnggss Brian W. Kernighan and P. J. Plauger, _S_o_f_t_w_a_r_e _T_o_o_l_s Addison-Wesley (1976) R. Furuta, J. Scofield and A. Shaw, _D_o_c_u_m_e_n_t _F_o_r_m_a_t_t_i_n_g _S_y_s_t_e_m_s_: _S_u_r_v_e_y_, _C_o_n_c_e_p_t_s_, _a_n_d _i_s_s_u_e_s ACM Computing Surveys, Sept. 1982, Pp. 417 Mark Stuart Brader, _A_n _I_n_c_r_e_m_e_n_t_a_l _T_e_x_t _F_o_r_m_a_t_t_e_r Department of Computer Science University of Waterloo, CS-81-12 1.0 Proff User's Guide 5 33..00 CCoommmmaanndd DDeessccrriippttiioonnss This section describes PROFF commands. Commands specify how the program is to process the text lines in the input file. Lines in the input file that begin with a period (or the control character selected by the user) immediately followed by a command name are commands. Any line that begins with a period and followed by a # or ! is a comment line and is ignored by PROFF - this allows you to put information in the file that will be neither processed nor output by PROFF. As described earlier, some of the commands can be followed by "parameters". Parameters are used in executing a command; for example, in the command ".sp 3", the parameter "3" tells the formatter to insert 3 blank lines into the document. The following conventions are used in describing the parameters: o Parameters surrounded by square brackets are optional. If not supplied, PROFF assumes a default value. (e.g. .sp [n]) o Parameters surrounded by angle brackets are mandatory. PROFF will display a fatal error message if the parameter is absent. (e.g. .set ) o Parameters surrounded by squiggly brackets are to be typed exactly as indicated. (e.g. .pn {roman}) o A bar character seperating the parameters within brackets indicate an alternative. (e.g. .st [+|-][n] means both .st [+n] and .st [-n]) In describing the commands, the command is typed exacty as accepted by PROFF with the associated control character default ("."). If more than one form of the command is accepted by PROFF, the command names are separated with a bar indicating an alternative. 1.0 Proff User's Guide 6 33..11 FFiilllliinngg aanndd JJuussttiiffyyiinngg .fi | .f | .fill The fill command causes a line to be filled with as many words as the right margin allows. For this purpose, all extra blanks and tabs are removed between words. Each word is separated with a single blank. PROFF automatically assumes fill mode during the startup. .nf | .nofill No fill discontinues the filling of the text. PROFF simply copies the text to the output. This command may be used to pass tables and other text unaltered through the formatter. .ju | .j | .justify Justify causes the words on a line to be evenly spaced between the left and the right margins. Note that lines can be justified only if lines are also being filled. PROFF automatically assumes justify mode during the startup. .nj | .nojustify No justify discontinues the text justification. 1.0 Proff User's Guide 7 33..22 TTeexxtt FFoorrmmaattttiinngg .br | .break Break causes a break: the current line is printed without justification, and the next word is placed at the beginning of a new line. Note that many PROFF commands cause an implicit break. .in | .lm | .leftmargin [+|-][n] Indent causes a break and indents the following lines [n] spaces to the right of the left margin. [n] can be negative to allow beginning a line to the left of the left margin, however, a line cannot begin to the left of column 0. If a plus or minus sign is used with n, then [n] is added or subtracted to or from the current value. .ti | .i | .left [+|-][n] Temporary indent is identical to the indent command except that it applies only to the next line of printed text. Thus, the command ".ti +5" would cause the next line to be printed 5 spaces to the right of those that follow. .st | .spaceto [-][n] Spaceto allows spacing to line [n] from the top of the current page. If a negative [n] is specified, than spacing is performed to line [n] from the bottom of the page (excluding the footer lines). Thus, footnotes can be set at a fixed distance from the bottom of the page by a command such as ".st -5". .sp | .s | .skip [n] Space causes a break and skips [n] lines, except at the top of a page. The space command is dependent on the setting of line spacing. .ce | .center [n | on | off] Center causes the next [n] lines of text to be centered between the left and right margins. Centering may be started with "on" and terminated with "off", in which case all input lines between these commands will be centered. .ul | .underline [n | on | off] Underline command causes the text on the next [n] input lines to be underlined when printed. If [n] is omitted, only the next line is underlined. This command does not 1.0 Proff User's Guide 8 cause a break, so words in filled text may be underlined by: | |The "Pay-off" Theory: Only |.ul |losers |believe in luck, horses, horoscopes |and |.ul |lotteries. | to get | |The "Pay-off" Theory: Only _l_o_s_e_r_s believe in |luck, horses, horoscopes and _l_o_t_t_e_r_i_e_s_. | Underlining may be started with "on" and terminated with "off", similar to the centering command. .ul | .underline [all | words] This version of the underline command is used to set the mode of underlining: all - underline across all characters, including spaces. words - underline words only .bd | .bold [n | on | off] The bold command causes the text on the next [n] input lines to be highlighted by overstriking. If [n] is omitted, only the next line is highlighted. Bolding may be started with "on" and terminated with "off" as in the case of the center and underline commands. .db | .dbo | .disablebolding Turns the bolding off, all bolding commands are ignored. This feature is useful for rough drafts. .eb | .ebo | .enablebolding Turns the bolding feature back on. Bolding is turned on during the PROFF startup. 1.0 Proff User's Guide 9 33..33 PPaaggee FFoorrmmaattttiinngg .ls | .spc | .spacing [n] Line spacing is the command to set line spacing. Set n to 1 for single spacing, 2 for double spacing etc. .bp | .pg | .page [n] The begin page command causes a break, ends the current page, outputs footers if required and begins a new page. If [n] is present, the page number is set to [n]. The default action is to number the pages incrementally. .pn | .pagenumber {roman} | {arabic} Page number command defines the format of the page number. Uppercase roman numerals may be obtained with "roman" keyword. To convert the page numbers back to normal, "arabic" is specified. PROFF uses arabic numerals as a default. .np | .nopaging No paging disables the pagination. When PROFF is in no paging mode, "begin page" (.bp) and "page length" (.pl) commands are ignored. This mode of operation is especially useful for using the proff output with the multi-column formatter (MC). .pa | .paging Paging enables normal page generation. This command starts a new page and restores the page length to the value previous to the ".np" command. .ne | .need | .tp | .testpage [n] Test page checks to see whether at least [n] lines remain in the current page. If less than this number of lines remain, printing will resume at the top of a new page. If [n] is missing, it is assumed to be zero. .he | .header Header sets the text to be printed on top of each page. is divided into sections which are to be left justified, centered and right justified. To divide into these three parts, the first character is assumed to be a separator. (e.g. /left/center/right/) But any non-alphanumeric character may also be used. The characters "#" and "%" are replaced with the current page number and 1.0 Proff User's Guide 10 day/time in the header. .fo | .footer Footer is identical to header except that it sets the text to be printed at the bottom of each page. .oh The odd header command sets the header for odd pages only. .eh The even header command sets the header for even pages only. .of The odd footer command sets the footer for odd pages only. .ef The even footer command sets the footer for even pages only. 1.0 Proff User's Guide 11 33..44 PPaaggee LLaayyoouutt These commands are used to specify where on the page you want the formatted text to be placed. The general layout of a page is as follows: page offset (.po) | | | V | +----+-------------------------------------+----+ -+ | | top margin (m1) includes header | | | +----+-------------------------------------+----+ | | | top margin 2 (m2) | | | +----+-------------------------------------+----+ | | | . | | P | |<-- indent (.in) . | | A | | . | | G | | T | | E | | E | | | | X | | L | | T | | E | | . | | N | | right margin (.rm) -->| | G | | . | | T | | . | | H | | . | | | +----+-------------------------------------+----+ | | | bottom margin 3 (m3) | | | +----+-------------------------------------+----+ | | | bottom margin (m4) includes footer | | | +----+-------------------------------------+----+ -+ | | | | .po | .offset [+|-][n] The page offset command moves the entire page to the right or left depending on the specified value. All indentation is according to the page offset. PROFF assumes a page offset of 0 during the startup. If [n] is specified with a plus or minus, it will be added or subtracted from the current value. .rm | .rightmargin [+|-][n] Right Margin sets the position of the last printable character from the left edge of the page to [n]. Default value for right margin is 65. A plus or minus value will be added or subtracted from the current value. If [n] is not specified, right margin is set to the default value. .pl | .ps | .pagesize [n] 1.0 Proff User's Guide 12 Page length is used to set the number of lines that are to be printed on a page including the header and footer lines. After [n] lines are printed, the paper will advance to the top of next page. The default page length is 66 lines (11 inches for 6 lines/inch). This command is disabled if nopaging is set. .m1 [n] Margin 1 sets the number of lines (including the header) which will be left at the top of the page to [n]. The default setting is 3. If [n] is omitted, is set to the default. .m2 [n] Margin 2 sets the number of blank lines between the header and the first line of text. The default setting is 2. .m3 [n] Margin 3 sets the number of blank lines between the footer and the last line of text. The default setting is 2. .m4 [n] Margin 4 sets the number of lines (including the footer) which will be left at the bottom of the page to [n]. The default setting is 3. 1.0 Proff User's Guide 13 33..55 TTaabbllee ooff CCoonntteennttss This section describes the the commands that are used to generate a table of contents. Basically, a contents line command is used in every place in the document where an entry is needed in the table of contents. PROFF stores the text and the page number when it encounters this command. After the the body of the document is processed, a print contents command dumps the contents table. The contents should be dumped in a new page, with nofill. Page numbering should be disabled if the table of contents is to be used in front of the document. .cl | .contline [ ] Contents line specifies a line of to be entered into the table of contents. specifies the level at which the item is to be printed in the table. When the table is printed, each level of entry will be indented by specific number of spaces. appears in the output exactly as it appears in the contents line command, except that leading blanks are removed. If no options specified in the contents line, a blank is inserted during the table output. .pc | .printcont [n] Print Contents causes the currently accumulated table of contents to be printed. If [n] is specified, it is used as the indent value for each level. If [n] is not specified, it is defaulted to 3. A contents line at level 0 is as wide as rightmargin-indent. The outlook of the table of contents may be changed by altering the right margin and indent values. A typical table of contents may be produced as follows: |.page |.he //// |.fo //// |.nofill |.sp |.center |Table of Contents |.sp |.printcont The following example illustrates the generation of a table of contents. Note that only one table of contents is active for a PROFF session. 1.0 Proff User's Guide 14 .cl .cl 0 A. Introduction Introduction text . .cl .cl 0 B. Methods Methods text . .cl 1 a) Sampling Procedures Sampling text . .cl 1 b) Laboratory Procedures Laboratory text . .cl .cl 0 C. Results Results text . . .pg .nf .he //// .fo //// .ce Table of Contents .sp .pc These commands will produce the following table: Table of Contents A. Introduction............................... 1 B. Methods.................................... 3 a) Sampling Procedures..................... 3 b) Laboratory Procedures................... 4 C. Results.................................... 5 Macros may be defined as described in the following sections to help the generation of the table of contents. 1.0 Proff User's Guide 15 33..66 MMiisscceellllaanneeoouuss This section describes miscellaneous commands that radically increase the formatting powers of PROFF. With the assistance of variables, PROFF can generate form letters and documents with dynamic parts. The ability to save and restore formatter context eliminates the need to remember the exact settings of the formatter across the document. .vs | .set [definition] Set variable defines a variable to be later used in the document. If the definition part is left out, PROFF uses the variable name as a prompt and allows the user to define the variable interactively. Variable names cannot start with a numeric character, and may only contain alphanumeric characters. The definition of a variable may not contain any blanks, unless they are surrounded by double-quotes. To get a double quote within a a quoted definition, two double-quotes are used. Once the variable is defined, it can be used anywhere in the document, including the command line itself. A variable substitution is invoked by a dollar sign ($). (A literal $ is inserted into text using _$). A variable name must be delimited by a non-alphanumeric character within the text. If the contents of the variable is to be appended to other alphanumeric characters, it must be surrounded by wiggly braces ("{" and "}"). The following is an example of variable usage: |.nf |.vs v1 Murphy |${v1}'s first law: | Nothing is as easy as it looks. |${v1}'s second law: | Everything takes longer than you think. |Charley's observation: | Computers were invented by $v1. | Produces the following: | |Murphy's first law: | Nothing is as easy as it looks. |Murphy's second law: | Everything takes longer than you think. |Charley's observation: | Computers were invented by Murphy. | 1.0 Proff User's Guide 16 .vg | .get Get variable is the interactive version of variable definition. In this variant, a prompt string is used to obtain the value of the variable, which is typed at the user's terminal. If the prompt string is to contain blanks, tabs etc., it must be enclosed in double quotes. No quotes are necessary for input text. .nr [+|-][n] Number register is used to define registers that contain numeric values. There are 26 number registers, named a-z. The command ".nr x n" sets the number register "x" to value n; ".nr x +n" increments the number register by n; ".nr x -n" decrements the number register by n. The value of the number register x is placed in the text by the appearance of @nx. A literal @ may be inserted using _@. Number registers may be used on command lines and anywhere in the text. .cc | .cchar [char] Control Character sets the character that distinguishes PROFF commands from text to be formatted. As a default, control character is set to (".") period. This character may be changed to something other than a period, either to mimic other formatters or to disallow interpretation of lines beginning with a period. (This document makes heavy use of the .cc command). .ec | .echar [char] Escape Character sets the character that disallows the interpretation of spacial characters such as @ and $. PROFF uses an underline ("_") character as a default. .so | .source | .include | .require [filename] The source (include) command allows external files to be inserted into the input file during the formatting. Using this feature, tables, graphs and other documents generated outside PROFF may be included into the document being formatted. This feature is also very useful in including a common set of macros during formatting. Include files may be nested inside other include files. Currently, PROFF only allows a nested include files level of 8. Filename may be enclosed in quotes. .sv | .save The save command allows the saving of the current formatter 1.0 Proff User's Guide 17 context on a pushdown stack. The saved context of the formatter segment (FSECT) includes the following values and flags: values flags on | off ------ ----- indent (.in) fill (.fi | .nf) right margin (.rm) justify (.ju | .nj) offset (.po) paging (.pa | .np) line spacing (.ls) number type (.pn) page length (.pl) bolding (.eb | .db) margin values (.m1) autoparagraph (.ap | .na) (.m2) (.m3) (.m4) control char (.cc) escape char (.ec) .rs | .restore The restore command pops the context stack and restores the values and flags as defined above. .lx | .lex [equate] The lexical modification command is essentially a permanent replacement of a given command. This command is used for changing the command names without resorting to the macro facility. Lex permanently removes the old command name from command tables and replaces it with the new definition. If the equate is not specified, the command becomes undefined and is no longer recognised by PROFF. The command equate should not contain non-alphanumeric characters. .ap | .autoparagraph The autoparagraph command turns on the automatic paragraphing feature. If auto-paragraphing is on, every line that starts with a _b_l_a_n_k or a _t_a_b character starts a new paragraph. A new line is generated (.sp) and the beginning of the paragraph is indented by five spaces. Autoparagraphing is the equivalent of the following commands: | |textextextextext |.sp |.ti +5 |textextextextext | .na | nap | .noautoparagraph 1.0 Proff User's Guide 18 No Autoparagraph command disables auto-paragraphing. .wr | .write Write is a special output command, only to be used to configure printers and other output devices with escape sequences. This command outputs the associated string as it is encountered, without going through the normal output routines of the formatter. Currently, the output string may contain control characters specified as "^", decimal numbers within the range of 1-255, and other characters. Blanks within the string are skipped. Any portion of the string enclosed with double quotes is output as is. To output a double quote, two double quotes must be used within the quoted string. Following is a typical string to set a Digital La-100 printer to letter quality print mode: | |.wr ^["[2z" | In the control string, "^[" is the ASCII equivalent of the Escape (esc) character. Following mapping table is used to convert characters starting with a caret to their binary equivalents: ("|" indicates an alternative) Control chr Dec. Oct. Hex. ----------- ---- ---- ---- ^a | ^A (soh) 1 01 01 ^b | ^B (stx) 2 02 02 ^c | ^C (etx) 3 03 03 ^d | ^D (eot) 4 04 04 ^e | ^E (enq) 5 05 05 ^f | ^F (ack) 6 06 06 ^g | ^G (bel) 7 07 07 ^h | ^H (bs) 8 10 08 ^i | ^I (ht) 9 11 09 ^j | ^J (nl) 10 12 0A ^k | ^K (vt) 11 13 0B ^l | ^L (np) 12 14 0C ^m | ^M (cr) 13 15 0D ^n | ^N (so) 14 16 0E ^o | ^O (si) 15 17 0F ^p | ^P (dle) 16 20 10 ^q | ^Q (dc1) 17 21 11 ^r | ^R (dc2) 18 22 12 ^s | ^S (dc3) 19 23 13 ^t | ^T (dc4) 20 24 14 ^u | ^U (nak) 21 25 15 ^v | ^V (syn) 22 26 16 ^w | ^W (etb) 23 27 17 ^x | ^X (can) 24 30 18 1.0 Proff User's Guide 19 ^y | ^Y (em) 25 31 19 ^z | ^Z (sub) 26 32 1A ^[ (esc) 27 33 1B ^\ (fs) 28 34 1C ^] (gs) 29 35 1D ^^ (rs) 30 36 1E ^_ (us) 31 37 1F 1.0 Proff User's Guide 20 33..77 DDeeffiinniinngg NNeeww CCoommmmaannddss ((MMaaccrrooss)) In document formatting, it is common to repeat a series of commands at several places in the document. PROFF allows you to define a new command that will replace these repeated commands. This not only saves typing but ensures that _e_x_a_c_t_l_y the same sequence of commands are applied throughout the document. A new command that you define is formally called a _m_a_c_r_o_. To define a macro, you must use the define macro (.de | .define) and end macro (.en) commands. .de | .define Define is used to define a to which a series of commands to be assigned. This definition line is followed by any number of PROFF commands and/or text which define the action that the macro will subsequently produce. Macros may refer to other macros. .en End macro is the last line in the command definition. You must put in this command to finish a currently defined macro. ".en" command should not be re-defined as a macro. The example below defines macros ".note" and ".endnote", similar to the RUNOFF commands of the same name. | |.define note |.sp |.ce |NOTE |.sp |.fi |.in +5 |.rm -5 |.en | |.define endnote |.sp |.nf |.in -5 |.rm +5 |.en | A macro is used like any other PROFF command, control character followed immediately by the name of the macro. For example, the above macros may be used as follows: 1.0 Proff User's Guide 21 | |.note |textextextextextextextextextext | . | . | . |.endnote | The following note is generated by the same macros described previously. NOTE Flap's Law: Any inanimate object, regardless of its position or configuration, may be expected to perform at any time in a totally unexpected manner for reasons that are either entirely obscure or else completely mysterious. Special symbols may be used within a macro definition. These symbols represent the parameters passed to a macro, delimited by blanks or commas. These symbols are $0 for macro name, $1 for the first parameter, $2 for the second parameter and so on, up to $9 for the ninth parameter. Currently, macro parameters may only contain alphanumerics, no string parameters are possible. The previous macro "note" may now be defined as follows: | |.define note |.sp |.ce |$2 $3 $4 $5 $6 $7 $8 $9 |.nr m $1 |.sp |.fi |.in +$1 |.rm -$1 |.en | |.define endnote |.sp |.nf |.in -@nm |.rm +@nm |.en | In this version of the "note" and "endnote" macros, the first parameter ($1) is used to pass the value for indentation and right margin adjustment. All the rest of the macro 1.0 Proff User's Guide 22 parameters ($2 - $9) are used as the title of the note. The indent value passed as the first parameter is also saved in the number register "m" to communicate it to the "endnote" macro, such that when the endnote macro is called, both indent and right margin values are adjusted back to normal. It is possible and may be more useful to use ".save" and ".restore" commands to accomplish the same task, especially if the macro alters the current formatting context drastically. The ".note" and ".endnote" macros may be called as follows: | |.note 5 Asimov's Law of Robotics |textextextextextextextextextext | . | . | . |.endnote | In this usage, the indent value will be adjusted by +5, right margin will be adjusted by -5, and the title "Asimov's Law of Robotics" will appear centered above the note. 1.0 Proff User's Guide 23 44..00 EExxeeccuuttiinngg PPRROOFFFF The PROFF program may be invoked with a series of optional parameters and filenames on the command line. The command synopsis is: PROFF [+n] [-n] [-v] [-s] [-pon] [-ifile] input [output] The square brackets indicate an optional parameter. Interpretation of the parameters is as follows: ++nn Start the printing of the document at the first page with number n. --nn Stop printing at the first page numbered higher than n. --vv Verbose mode. PROFF indicates the source files being included into document, and produces a summary of the number of textlines read in, the number of lines and actual pages generated. A memory usage summary of internal storage for macros, stacks and tables is also displayed. --ss Stop before each page, including the first one to allow paper adjustment. A prompt is given just before the first page. For each page thereafter, the terminal bell is rung to indicate that another sheet of paper is needed. --ppoonn Sets the page offset to n. This is equivalent to ".po" command within the document. It is recommended that -pon option be used instead of embedding the offset value within the document. --iiffiillee Includes the given file to the formatted document. This is equivalent to a ".include file" command within the document. This option may be repeated more than once, -ifile1 -ifile2 etc. iinnppuutt Specifies the input file to be formatted. PROFF does not impose any file extension. The recommended extension is ".PRF". 1.0 Proff User's Guide 24 oouuttppuutt Specifies the output file for the formatted document. If this is omitted, output is directed to the user's terminal. Following are some examples of PROFF command lines: A>PROFF -v proffman.prf Format this document (proffman.prf) in verbose mode, and output the formatted document to the terminal. A>PROFF +5 -imacros.pma proffman.prf Format this document, include the external file MACROS.PMA, skip the first four pages and output the formatted document to the terminal. A>PROFF -po10 proffman.prf proff.man Format this document, shift the entire document by 10 spaces to right and output to a file called proff.man. 1.0 Proff User's Guide 25 55..00 TTiippss oonn uussiinngg PPRROOFFFF 55..11 CCaarree aanndd FFeeeeddiinngg ooff MMeemmoorryy PROFF uses a dynamic memory allocation scheme for some of its operations. These are macro definitions, contents lines, variables and save context operation. Running PROFF under microcomputers with limited memory resources (64k or less) require some care in using these commands: a) Do not declare macros that are not needed within the document. b) Do not use comments within macros. Due to delayed evaluation, comments will also be stored as a part of the macro definition. c) Where possible, avoid using too much text within macros. It is just as easy to pass the information during the macro call. d) Use only the shortest form of commands within macros. e) Be brief in contents line text. f) Use short variable names as long as it is not so cryptic as to be confusing. g) Avoid unnecessary blanks within the variable definitions. h) Avoid too many context saves without a corresponding restore. The restore operation reclaims the memory used for a save. Even if the formatter is used with a system of large memory resources, some of the precautions above are applicable. (Utz's 4th law of Computer Programming: Any given program will eventually expand to fill all the available memory.) Using the -v option under memory-restricted systems may be useful in determining the memory usage. 55..22 FFoorrmmaattttiinngg wwiitthhoouutt ffuussss PROFF, using its default settings, may provide reasonably formatted output in many situations. As an example, examine the document PROFF.TUT. This document does not use ANY formatting commands. All formatting is done with the default settings. 55..33 VVaarriiaabblleess wwiitthhiinn mmaaccrrooss 1.0 Proff User's Guide 26 Variable expansions may be performed within the macros. Typically, one of the parameters of the macro is assumed to be a variable, which is expanded only after the macro is used. Thus: | |.define xx |.ce |$$1 |.cl $$1 |.en | The macro xx assumes the first parameter to be a variable, which is centered on the page, and also entered in the table of contents. Note the usage of "$$1". The lines within a macro are scanned from right to left for parameter expansion. Thus, "$1" is expanded first, resulting in "$". This is later expanded as a variable. 1.0 Proff User's Guide 27 66..00 EExxaammppllee mmaaccrrooss .! .! macros to create a point-form lists. .! note the use of number registers within .! the macros. .!------------ .define list .nr a $1 .in $1 .en .!------------ .define item .sp .ti -@na $1 .en .!------------ .define nolist .in -@na .sp .en .!------------ The "list" macro is used to generate point-form lists. The first parameter is an indent value, size of point-str + 1. A typical usage may be as follows: | |Project work involves: |.sp |.list 3 { size-of-point-str + 1 } |.item a) { "a)" is the point-str } |choosing a topic |.item b) |defining the topic |.item c) |research |.item d) |organizing the notes |{etc.} |.nolist { readjusts the indent } | The above usage will produce the following: 1.0 Proff User's Guide 28 | |Project work involves: | |a) choosing a topic | |b) defining the topic | |c) research | |d) organizing the notes | The point-form recommendations under section 5.1 (Care and Feeding of Memory) were generated with the same set of macros described above. 1.0 Proff User's Guide 29 77..00 AAcckknnoowwlleeddggeemmeennttss This document was edited by Terry Lim and Steven Tress. The format of the document is largely based on The Freshwater Institute RUNOFF User's Guide. The Quotes for the various formatting examples are from THE QUOTABLE NOTHING BOOK and from 1001 LOGICAL LAWS, ACCURATE AXIOMS, PROFOUND PRINCIPLES, TRUSTY TRUISMS, HOMEY HOMILIES, COLORFUL COROLLARIES, QUOTABLE QUOTES, AND RAMBUNCTIOUS RUMINATIONS FOR ALL WALKS OF LIFE, by Peers, Bennet and Booth, Fawcett Columbine Books, New York. 1.0 Appendix A 30 AAppppeennddiixx AA Summary of Commands ---------------------------------------------------------- .fi | .f | .fill default: initial: yes break: yes begin filling output lines ---------------------------------------------------------- .nf | .nofill default: initial: no break: yes stop filling ---------------------------------------------------------- .ju | .j | .justify default: initial: yes break: yes begin justifying filled lines ---------------------------------------------------------- .nj | .nojustify default: initial: no break: yes stop justifying ---------------------------------------------------------- .br | .break default: initial: break: yes cause a break and output current line ---------------------------------------------------------- .in | .lm | .leftmargin [+|-][n] default: 0 inital: 0 break: yes set left margin to column n+1 ---------------------------------------------------------- .ti | .i | .left [+|-][n] default: 0 initial: break: yes temporarily indent next output n spaces ---------------------------------------------------------- .st | .spaceto [-][n] default: 0 initial: break: yes space to line +n from top space to line -n from bottom ---------------------------------------------------------- .sp | .s | .skip [n] default: 1 initial: break: yes space n lines except at top of page ---------------------------------------------------------- .ce | .center [n | on | off] default: 1 initial break: yes center next n lines center until turned off ---------------------------------------------------------- .ul | .underline [n | on | off] default: 1 initial break: no underline next n lines underline until turned off ---------------------------------------------------------- 1.0 Appendix A 31 ---------------------------------------------------------- .ul | .underline [all | words] default: words initial: words break: no set mode for underline - words or all ---------------------------------------------------------- .bd | .bold [n | on | off] default: 1 initial: break: no boldface (overstrike) next n lines boldface until turned off ---------------------------------------------------------- .db | .dbo | .disablebolding default: initial: no break: no disable bolding ---------------------------------------------------------- .eb | .ebo | .enablebolding default: initial: yes break: no enable bolding ---------------------------------------------------------- .ls | .spc | .spacing [n] default: 1 initial: 1 break: no set line spacing to n ---------------------------------------------------------- .bp | .pg | .page [n] default: +1 initial: 1 break: yes begin a new page and number it n ---------------------------------------------------------- .pn | .pagenumber {roman} | {arabic} default: initial: arabic break: no set page numbering to arabic or roman ---------------------------------------------------------- .np | .nopaging default: initial: no break: yes disable paging ---------------------------------------------------------- .pa | .paging default: initial: yes break: yes enable paging ---------------------------------------------------------- .ne | .need | .tp | .testpage [n] default: 0 initial: break: yes/no need n lines. Break and generate a new page if not available ---------------------------------------------------------- .he | .header default: null initial: null break: no set header to text (/left/center/right/) ---------------------------------------------------------- .fo | .footer default: null initial: null break: no set footer to text (/lef/center/right/) ---------------------------------------------------------- 1.0 Appendix A 32 ---------------------------------------------------------- .oh default: null initial: null break: no set header on odd pages to text ---------------------------------------------------------- .eh default: null initial: null break: no set header on even pages to text ---------------------------------------------------------- .of default: null initial: null break: no set footer on odd pages to text ---------------------------------------------------------- .ef default: null initial: null break: no set footer on odd pages to text ---------------------------------------------------------- .po | .offset [+|-][n] default: 0 initial: 0 break: yes set page offset to n spaces ---------------------------------------------------------- .rm | .rightmargin [+|-][n] default: 65 initial: 65 break: no set right margin to column n ---------------------------------------------------------- .pl | .ps | .pagesize [n] default: 66 initial: 66 break: no set page length to n lines ---------------------------------------------------------- .m1 [n] default: 3 initial: 3 break: no lines between top of page and header ---------------------------------------------------------- .m2 [n] default: 2 initial: 2 break: no lines between header and text ---------------------------------------------------------- .m3 [n] default: 2 initial: 2 break: no lines between text and footer ---------------------------------------------------------- .m4 [n] default: 3 initial: 3 break: no lines between footer and bottom ---------------------------------------------------------- .cl | .contline [ ] default: initial: break: yes enter text into table of contents at level n ---------------------------------------------------------- 1.0 Appendix A 33 ---------------------------------------------------------- .pc | .printcont [n] default: 3 initial: 3 break: yes print table of contents, indent each level n spaces ---------------------------------------------------------- .vs | .set [definition] default: initial: break: no set variable to text ---------------------------------------------------------- .vg | .get default: initial: break: no set variable interactively, using text as prompt ---------------------------------------------------------- .nr [+|-][n] default: 0 initial: 0 break: no set number register (a-z) to n ---------------------------------------------------------- .cc | .cchar [char] default: "." initial: "." break: no set command control character to char ---------------------------------------------------------- .ec | .echar [char] default: "_" initial: "_" break: no set universal escape character to char ---------------------------------------------------------- .so | .source | .include | .require [filename] default: initial: input break: no switch input to file ---------------------------------------------------------- .sv | .save default: initial: break: yes save the current formatter context on context stack ---------------------------------------------------------- .rs | .restore default: initial: break: yes restore the formatter context from context stack ---------------------------------------------------------- .lx | .lex [equate] default: initial: break: no rename a command ---------------------------------------------------------- .ap | .autoparagraph default: initial: no break: no enable auto-paragraphing ---------------------------------------------------------- 1.0 Appendix A 34 ---------------------------------------------------------- .na | nap | .noautoparagraph default: initial: yes break: no disable auto-paragraphing ---------------------------------------------------------- .wr | .write default: initial: break: no write a special string to output. line counter does not change ---------------------------------------------------------- .de | .define default: initial: break: no define a macro command - ends at ".en" ---------------------------------------------------------- .en default: initial: break: no end the macro definition ---------------------------------------------------------- Table Of Contents PROFF 1.0 1.0 Introduction ....................................... 1 2.0 General Description ................................. 2 2.1 The Input ........................................ 2 2.1.1 Text ....................................... 2 2.1.2 Commands ................................... 2 2.2 The Output ....................................... 3 2.3 Executing PROFF .................................. 3 2.4 Bibliographic Notes .............................. 4 2.5 References and Readings ........................... 4 3.0 Command Descriptions ................................ 5 3.1 Filling and Justifying ............................ 6 .fi | .f | .fill..................................... 6 .nf | .nofill........................................ 6 .ju | .j | .justify.................................. 6 .nj | .nojustify..................................... 6 3.2 Text Formatting .................................. 7 .br | .break......................................... 7 .in | .lm | .leftmargin [+|-][n]..................... 7 .ti | .i | .left [+|-][n]............................ 7 .st | .spaceto [-][n]................................ 7 .sp | .s | .skip [n]................................. 7 .ce | .center [n | on | off]......................... 7 .ul | .underline [n | on | off]...................... 7 .ul | .underline [all | words]....................... 8 .bd | .bold [n | on | off]........................... 8 .db | .dbo | .disablebolding......................... 8 .eb | .ebo | .enablebolding.......................... 8 3.3 Page Formatting .................................. 9 .ls | .spc | .spacing [n]............................ 9 .bp | .pg | .page [n]................................ 9 .pn | .pagenumber {roman} | {arabic}................. 9 .np | .nopaging...................................... 9 .pa | .paging........................................ 9 .ne | .need | .tp | .testpage [n].................... 9 .he | .header ................................. 9 .fo | .footer ................................. 10 .oh ........................................... 10 .eh ........................................... 10 .of ........................................... 10 - I - .ef ........................................... 10 3.4 Page Layout ...................................... 11 .po | .offset [+|-][n]............................... 11 .rm | .rightmargin [+|-][n].......................... 11 .pl | .ps | .pagesize [n]............................ 11 .m1 [n].............................................. 12 .m2 [n].............................................. 12 .m3 [n].............................................. 12 .m4 [n].............................................. 12 3.5 Table of Contents ................................. 13 .cl | .contline [ ]......................... 13 .pc | .printcont [n]................................. 13 3.6 Miscellaneous ................................... 15 .vs | .set [definition]................... 15 .vg | .get ....................... 15 .nr [+|-][n]................................... 16 .cc | .cchar [char].................................. 16 .ec | .echar [char].................................. 16 .so | .source | .include | .require [filename]....... 16 .sv | .save.......................................... 16 .rs | .restore....................................... 17 .lx | .lex [equate]........................ 17 .ap | .autoparagraph................................. 17 .na | nap | .noautoparagraph......................... 17 .wr | .write ................................ 18 3.7 Defining New Commands (Macros) ..................... 20 .de | .define ........................... 20 .en.................................................. 20 4.0 Executing PROFF ..................................... 23 5.0 Tips on using PROFF ................................... 25 5.1 Care and Feeding of Memory.......................... 25 5.2 Formatting without fuss ........................... 25 5.3 Variables within macros ........................... 25 6.0 Example macros ...................................... 27 7.0 Acknowledgements ................................... 29 Appendix A ............................................. 30 - II - e