;*******************************************************************
;
; THIS COMMAND FILE WILL BUILD THE UTILITY WITH A 4K FCS RESIDENT
; LIBRARY ON A MAPPED SYSTEM.  PARTITION VALUES HAVE BEEN MODIFIED
; TO REFLECT THE AMOUNT OF BUFFER SPACE REALLY NEEDED BY THE TASK.
; USUALLY THIS VALUE IS CLOSE TO OR IDENTICAL TO THE BUFFER SPACE
; THE TASK WOULD HAVE IF BUILT WITHOUT FCSRES IN AN 8K PARTITION.
; NOTE THAT IT IS ASSUMED THAT SYSLIB DOES NOT HAVE ANSI SUPPORT
; IN IT.  HENCE FCSRES DOES NOT HAVE ANSI SUPPORT, AND THE
; TASKS BUILT WITH FCSRES DO NOT HAVE ANSI SUPPORT.
;
; NOTE THAT THE TASK WILL BE BUILT ONTO THE LOGICAL DEVICE
; OU: ONTO [1,53].  BEFORE ISSUEING A TKB COMMAND, OU: MUST BE
; ASSIGNED TO THE TARGET DISK.  
;
;        15-FEB-79	JAMES G. DOWNWARD
;			KMS FUSION,INC.
;			3941 RESEARCH PARK DR.
;			ANN ARBOR, MICH. 48104
;			(313) 769-8500
;*******************************************************************
;
; TASK BUILDER BUILD FILE
;
; BIG TASK BUILDER -- MAPPED VERSION
;
OU:[1,53]BIGTKB/CP/-EA/-FP/MM,MP:[1,33]BIGTKB/-SP/MA=[1,23]BTKBFCS/MP
;
; OPTION INPUTS
;
UNITS=8			; RESERVE HEADER SPACE FOR 8 LUNS
LIBR=FCSRES:RO:7
ASG=TI:1		; ASSIGN COMMAND INPUT 
ASG=TI:2		; ASSIGN ERROR MESSAGE DEVICE
ASG=OV:8		; ASSIGN WORKFILE DEVICE
EXTSCT=P3B$D:1000	; ALLOCATE PHASE 3 FCS BUFFER
GBLDEF=D$FAPR:5		; DEFAULT INITIAL APR FOR PRIVILEGED TASKS
GBLDEF=M$XAPR:1		; MAXIMUM INITIAL APR FOR PRIVILEGED TASKS (BIASED)
GBLDEF=N$MPAG:24	; SET PAGE LIST THRESHOLD
GBLDEF=P$LNTH:74	; SET NUMBER OF LINES PER PAGE
GBLDEF=T$KINC:4100	; TASK EXTENSION INCREMENT
GBLDEF=T$KMAX:177700	; MAXIMUM TASK SIZE
GBLDEF=W$KEXT:31	; SET DEFAULT WORKFILE EXTEND SIZE
GBLDEF=W$KLUN:10	; SET WORKFILE LUN
;GBLDEF=..RWLG:0		; DELETE READ/WRITE LONG REFERENCE
GBLPAT=P3LBSR:$MXLBF:1000 ; ESTABLISH SIZE OF LIBRARY SEARCH BUFFER
TASK=...TKB		; TASK NAME FOR MCR INITIATION
PAR=GEN
EXTTSK=6208		; same extend as for non FCS to 70000
STACK=128		; ALLOCATE 128 WORDS FOR STACK
;
; MODIFING TASK FILE SWITCH DEFAULTS
;
;	GBLPAT=TASKB:SWITCH:XXXXXX
;
; 	WHERE 'SWITCH' REPRESENTS THE SWITCH WORD AND 'XXXXXX'
;	REPRESENTS THE REVISED BIT SETTING. NOTE THAT
;	THE STATE OF BIT POSITIONS NOT LISTED IN THE TABLE 
;	MUST NOT BE ALTERED.
;
;
; SWITCH WORD: $DFSWT
; INITIAL CONTENTS: 0
;
;	BIT	CONDITION IF SET TO 1
;
;	15	AB
;	11	SQ
;	 4	FU
;	 3	-RO
;
; SWITCH WORD: $DFTSK
; INITIAL CONTENTS: 100002
;
;	BIT	CONDITION IF SET
;
;	15	-CP,-AL
;	14	FP
;	13	EA
;	12	-HD
;	11	CM
;	10	DA
;	9	PI
;	8	PR
;	7	TR
;	6	PM
;	5	SL	
;	4	-SE
;	3	AC
;	2	-AL
;	1	NT
;
;
; MODIFYING MAP FILE SWITCH DEFAULTS
;
;	GBLPAT=TASKB:"SWITCH":XXXXXX
;
; SWITCH WORD: $DFLBS
; INITIAL CONTENTS: 120000
;
; 	BIT	CONDITION IF SET
;
;	15	-MA
;
; SWITCH WORD:	$DFMAP
; INITIAL CONTENTS: 2040
;
;	BIT	CONDITION IF SET
;
;	10	SH
;	 8	-SP
;	 6	CR
;	 5	WI
;
GBLPAT=TASKB:$DFMAP:2440		; make -sp default
GBLPAT=TASKB:$DFTSK:40002		; make cp, fp and -al default
/