README.1ST		MAO		28-OCT-80
 
	THE FILES ON THIS TAPE ARE THE SOURCES AND COMMAND FILES FOR THE
DECUS STRUCTURED FORTRAN PREPROCESSOR WORKING GROUP VERSION OF FLECS.
THE FILES AND SOURCES WILL WORK UNDER RSX-11M 3.2, IAS 3.0 AND VMS 1.6.
(NOTE RSX OBJECT MODULES MAY BE USED TO BUILD THE VAX VERSION EXCEPT FOR
FLERSX.MAC WHICH MUST BE RE-ASSEMBLED ON THE VAX.)
 
	IN ORDER TO PRODUCE A WORKING COPY OF FLECS FROM THESE FILES
THE FOLLOWING STEPS ARE NECESSARY (ON THE VAX REPLACE ".CMD" BY ".COM"):
 
	1.  TRANSFER ALL FILES FROM THE TAPE TO SOME DISK, UIC.
 
	2.  EXECUTE THE FILE FLECRE.CMD.  THIS WILL COMPILE THE FTN
FILES (NOTE F4P IS USED--FOR WILL WORK TOO), ASSEMBLE THE MAC FILE
AND TASK BUILD FLE.TSK.  DO NOT USE FLEBLD.CMD AT THIS STAGE; BECAUSE
OF THE USE OF IN-LINE COMMENTS IN THE .FLX SOURCES ON THIS TAPE, OLD
VERSIONS OF FLECS CANNOT PROPERLY TRANSLATE THE .FLX FILES ON THIS TAPE.
 
	3.  INSTALL THE COPY OF FLE.TSK PRODUCED AND EXECUTE THE FILE
FLETST.CMD.  THE FILE WILL TELL IF THE NEW VERSION OF FLE.TSK WORKS
CORRECTLY.
 
	4.  AT THIS POINT YOU MAY WISH TO EXECUTE FLEBLD.CMD WHICH
WILL GIVE YOU A COMPLETELY NEW SET OF FILES FOR FLECS (AND DESTROY THE
DISTRIBUTION COPIES ON THE DISK).  THIS FILE IS ACTUALLY INTENDED FOR
USE IF YOU WISH TO MODIFY FLECS AFTER YOU HAVE A WORKING VERSION.
 
	BELOW IS A LIST OF FILES ON THE TAPE:
 
README.1ST	THIS FILE, AN ASCII TEXT FILE.
 
FLECSMAN.RNO	FLECS MANUAL, IN RUNOFF INPUT FORMAT.
		(RNO FLECSMAN/-HY/UL:L/-SP=FLECSMAN)
 
FLEDECUS2.RNO	TEXT OF TALK GIVEN AT FALL 1980 SAN DIEGO MEETING.
 
GETCML.FLX	SOURCE FOR EXAMPLE GIVEN IN FLEDECUS2.RNO
 
FLEDIST.CMD	COMMAND FILE TO CREATE THE DISTRIBUTION TAPE.
 
FLECRE.CMD/COM	COMMAND FILE TO CREATE FLE.TSK FROM DISTRIBUTION.
 
FLETST.CMD/COM	COMMAND FILE TO TEST NEWLY CREATED FLE.TSK.
 
FLEBLD.CMD/COM	COMMAND FILE TO RECREATE FLE.TSK ONCE FLECRE.CMD
		HAS BEEN USED TO CREATE INITIAL VERSION.
 
FLECMP.CMD/COM	COMMAND FILE TO COMPILE FLECS SOURCES
		(USED BY FLEBLD.CMD).
 
FLETKB.CMD/COM	COMMAND FILE TO TASK BUILD FLE.TSK.
		(USED BY FLEBLD.CMD).
 
FLEPRT.CMD/COM	COMMAND FILE TO LIST ALL FLECS COMMAND FILES AND
		LISTING FILES ON LP:.
 
FLERSX.MAC	SOURCE FILE, FLECS MACRO ROUTINES.
 
FSUB.FTN	SOURCE FILE, FLECS FORTRAN SUPPORT ROUTINES.
 
A.FTN		SOURCE FILE, FLECS ANALYZER SUBROUTINE.
A.FLX		SOURCE FILE,	"	"	"
A.FLL		LISTING FILE,	"	"	"
 
L.FTN		SOURCE FILE, FLECS LISTING SUBROUTINE.
L.FLX		SOURCE FILE,	"	"	"
L.FLL		LISTING FILE,	"	"	"
 
M.FTN		SOURCE FILE, FLECS MAIN ROUTINE.
M.FLX		SOURCE FILE,	"    "   "
M.FLL		LISTING FILE,	"    "   "
 
FLE.CMD/COM	COMMAND FILE TO USE FLECS.
 
 
	MICHAEL A. OOTHOUDT	(505) 667-4354 OR (505) 667-5241
	P.O. BOX 1663, MAIL STOP 828
	LOS ALAMOS, NM 87545
 
END OF FILE README.1ST