OU:[1,53]EDT.TSK;1/-FP/CP,[1,34]EDT/-SP/MA=[1,20]EDTFCSBLD/MP
TASK=...EDT
;
;
; THE FOLLOWING SPECIFIES THE LUNS & THEIR USAGES FOR EDT ON VAX:
;	1.  LUN #1  -  TERMINAL I/O
;	2.  LUN #2  -  OUTPUT FILE I/O
;	3.  LUN #3  -  INPUT FILE I/O
;	4.  LUN #4  -  WORKFILE SYSTEM I/O
;	5.  LUN #5  -  ERROR MESSAGE FILE I/O
;
;
UNITS=5
PRI=55
UIC=[200,200]
ASG=TI:1
ASG=SY:2:3:4:5
;
;
; IF ROOM EXISTS THE FOLLOWING MAY BE 10000 INSTEAD OF 5000.
; THIS SPECIFIES THE AMOUNT OF INCORE PAGING AREA FOR THE WORKFILE.
;
;
EXTSCT=FRCOR1:5000
;
;
; THE FOLLOWING
; PROVIDES ENOUGH BUFFER SPACE FOR 10 BUFFERS.
; FOR EACH ADDITIONAL BUFFER DESIRED, ADD 12(OCTAL) BYTES.
;
;
EXTSCT=BFHED1:144
;
;
; THE FOLLOWING
; PROVIDES ENOUGH SPACE FOR 81. ERRORS (IN THE ERROR MESSAGE
; FILE "EDTCOM.MSG").
;
;
EXTSCT=ERHED1:242
;
;
; THE FOLLOWING
; PROVIDES ENOUGH SPACE FOR 10 SIMULTANEOUS FILES.
; FOR EACH ADDITIONAL FILE DESIRED, ADD 56(OCTAL) BYTES TO TABLE.
;
;
EXTSCT=FILSV1:714
;
;
; DEFAULT TERMINAL TYPE 0-HCPY,1-LA30,2-LA36,3-VT05,4-VT50,5-VT52,6-VT55,7-VT61
; THE DEFAULT SELECTED FOR VAX IS A VT52.
;
;
GBLPAT=EDT:TRMTYP:0
;
;
; DEFAULT LINE CNT ALL HARD COPY=1,VT05=19,VT50=11,VT52-61=23
; THE DEFAULT FOR A VT52 IS 23. (27 OCTAL).
;
;
GBLPAT=EDT:LINCNT:1
;
;
; DEFAULT LINE SIZE HCPY=72,LA30=80,LA36=132,VT05=72,VT50-61=80
; THE DEFAULT FOR A VT52 IS 80. (120 OCTAL).
;
;
GBLPAT=EDT:LINSIZ:204
;
;
; DEFAULT COMMAND LINE BUFFER SIZE
;
;
GBLPAT=EDT:CMLBSZ:400
;
;
; DEFAULT DIAGNOSTIC FILE DEVICE IS "SY".  TO USE "LB" INSTEAD,
; THE FOLLOWING PATCH SHOULD BE ENABLED.
; THE ERROR MESSAGE FILE IS LB:[1,2]EDTCOM.MSG ON VAX.
;
;
GBLPAT=EDT:MSGDEV:41114
PAR=GEN
LIBR=FCSRES:RO:7
;
STACK=450
/