;*******************************************************************
;
; THIS COMMAND FILE WILL BUILD THE UTILITY WITH A 4K FCS RESIDENT
; LIBRARY ON A MAPPED SYSTEM.  PARTITION VALUES HAVE BEEN MODIFIED
; TO REFLECT THE AMOUNT OF BUFFER SPACE REALLY NEEDED BY THE TASK.
; USUALLY THIS VALUE IS CLOSE TO OR IDENTICAL TO THE BUFFER SPACE
; THE TASK WOULD HAVE IF BUILT WITHOUT FCSRES IN AN 8K PARTITION.
; NOTE THAT IT IS ASSUMED THAT SYSLIB DOES NOT HAVE ANSI SUPPORT
; IN IT.  HENCE FCSRES DOES NOT HAVE ANSI SUPPORT, AND THE
; TASKS BUILT WITH FCSRES DO NOT HAVE ANSI SUPPORT.
;
; NOTE THAT THE TASK WILL BE BUILT ONTO THE LOGICAL DEVICE
; OU: ONTO [1,53].  BEFORE ISSUEING A TKB COMMAND, OU: MUST BE
; ASSIGNED TO THE TARGET DISK.  
;
;        15-FEB-79	JAMES G. DOWNWARD
;			KMS FUSION,INC.
;			3941 RESEARCH PARK DR.
;			ANN ARBOR, MICH. 48104
;			(313) 769-8500
;*******************************************************************
;	BUILD V-TECO MAPPED
;
; TASK BUILD FILE FOR RSX-11M VT-52 TECO. TO WORK IN ITS NORMAL FASHION,
; TECO SHOULD BE INSTALLED TWICE, ONCE UNDER ITS NORMAL NAME AND ONCE
; UNDER THE NAME "...MAK" TO IMPLEMENT THE "MAKE" COMMAND.
;
OU:[1,53]VTEC/CP/-FP/MM,MP:[1,34]VTEC/MA/-SP=[1,20]VTECFCS/MP

TASK=...TEV
;PAR=GEN:0:100000
PAR=GEN:0:76200
LIBR=FCSRES:RO:7
PRI=65
UIC=[200,200]
;
; LUN 1 IS USED FOR THE INDIRECT COMMAND FILE
; LUN 2 IS USED FOR CONSOLE I/O
; LUN 3 IS USED FOR THE OUTPUT FILE
; LUN 4 IS USED FOR THE INPUT FILE
; LUN 5 IS USED BY THE ERROR PROCESSOR
; LUN 6 IS USED FOR THE TEMP DIRECTORY
; LUN 7 IS USED FOR "EN" COMMANDS
;
UNITS=7
ASG=TI:2
ASG=SY:1:3:4:5:6:7
;
; PATCH THE LUN USED BY THE ERROR PROCESSOR (GERRM)
;
GBLPAT=INIT:.EOLUN:5
;
STACK=200
;
; TECO'S DYNAMIC MEMORY IS ALLOCATED FROM THE REGION STARTING AT THE
; END OF THE TASK IMAGE AND ENDING AT THE END OF THE PARTITION.
; IF THE DYNAMIC MEMORY FACILITY IS NOT IN USE, ASSEMBLE TECOIO WITH
; THE PARAMETER R$$DYM=0, AND USE AN EXTSCT DIRECTIVE HERE TO 
; SPECIFY THE TOTAL NO. OF BYTES IN OCTAL FOR THE DYNAMIC MEMORY REGION
; E.G.
;	EXTSCT=$$DYB1:20000	;WOULD GIVE 4K WORDS, 8K BYTES
;
; IF DYNAMIC MEMORY IS IN USE, RECOMMEND A MINIMUM TASK SIZE:
;
EXTTSK=4000
;
; THE FOLLOWING PARAMETER SETS TECO'S BUFFER EXPANSION LIMIT. IF
; STARTED WITH A BUFFER SIZE UNDER THIS LIMIT, THEN IT WILL NOT
; EXPAND BEYOND IT. IF STARTED WITH A SIZE ABOVE THE LIMIT
; (WITH RUN OR INS /INC=) THEN IT WILL EXPAND TO THE MAXIMUM
; POSSIBLE TASK SIZE. THE VALUE GIVEN OF 40000 CORRESPONDS TO 8K WORDS.
;
GBLDEF=BUFLIM:40000
;
; THE FOLLOWING PARAMETER SETS THE SIZE OF TECO'S PUSH DOWN LIST.
; IT MAY BE NECESSARY TO INCREASE THIS TO ACCOMMODATE MANY LEVELS OF
; ITERATION, MACRO CALLS, ETC.
;
GBLDEF=PDLSIZ:100
;
; THE FOLLOWING PARAMETER SETS THE SIZE OF THE SEARCH BUFFER.
; IT MAY BE INCREASED TO ACCOMMODATE VERY LONG SEARCH STRINGS.
;
GBLDEF=SCHSIZ:100
;
; THE REMAINING SPACE IS DYNAMICALLY SHARED BETWEEN TEXT BUFFER AND
; Q REGISTER STORAGE.
; THE FOLLOWING PARAMTER DEFINES THE MINIMUM AMOUNT OF SPACE REQUIRED.
;
GBLDEF=MBFSIZ:1400
;
/