.ENABLE SUBSTITUTION
.ASK MAP ARE YOU BUILDING FILEIND FOR A MAPPED SYSTEM
.IFT MAP .ASK LARGE IS YOUR EXECUTIVE LARGER THAN 16K
.IFF MAP .SETF LARGE
.IFT LARGE ;UNFORTUNATELY THE MODIFIED INDIRECT COMMAND
.IFT LARGE ;FILE PROCESSOR IS OF LIMITED
.IFT LARGE ;USEFULLNESS IF BUILT FOR AN EXECUTIVE
.IFT LARGE ;LARGER THAN 16K.  YOU WILL NOT BE ABLE TO
.IFT LARGE ; DO A SYSGEN WITH THE MODIFED INDIRECT
.IFT LARGE ;PROCESSOR BECAUSE OF THE ERROR
.IFT LARGE ;"SYMBOL TABLE OVERFLOW"
.IFT LARGE ;THE PROBLEM IS THAT THE CODE ADDED
.IFT LARGE ;TO THE TASK DOES NOT LEAVE ROOM FOR A
.IFT LARGE ;LARGE SYMBOL TABLE.  PERHAPS SOME MEMBER
.IFT LARGE ;OF DECUS WILL FIGURE OUT HOW TO OVERLAY
.IFT LARGE ;THE TASK SO THAT THIS PROBLEM IS ADVOIDED.
.IFT LARGE ;I DO NOT HAVE TIME TO DO THIS AS MY
.IFT LARGE ;EXECUTIVE IS EXACTLY 16K
.IFT LARGE .ASK CONT DO YOU WISH TO CONTINUE
.IFF LARGE .SETT CONT
.IFF CONT /
.IFT MAP .SETS LOC "[1,24]"
.IFF MAP .SETS LOC "[1,20]"
.IFT MAP .SETS OTH "[1,54]"
.IFF MAP .SETS OTH "[1,50]"
;THIS COMMAND FILE MAKES THE FOLLOWING ASSUMPTIONS:
;THE FOLLOWING FILES EXIST IN THE FOLLOWING LOCATIONS
;LB:[1,1]    --   EXEMC.MLB   - SYSLIB.OLB
;LB:[200,200]   -- RSXMC.MAC
;SY:[12,10]  -- MGCML.MAC,INDERR.MAC,INDIMP.MAC,INDAS2.MAC
;		INDAS1.MAC,INDPDW.MAC,INDFIL.MAC
;		INDINX.MAC,INDASK,INDINX
;THESE CAN BE FOUND ON THE RSX11M 3.1 DISTRIBUTION KIT
;SY:'LOC'  -- INDBLD.CMD,INDBLD.ODL,IND.OLB,MCR.OLB
;THESE FILES CAN BE FOUND ON THE RSX11M 3.1 DISTRIBUTION KIT
;ALL FILES FROM THE DECUS INDIRECT COMMAND FILE MODIFICATIONS
;DISTRIBUTION KIT SHOULD BE IN SY:[2,4]
;THE UFD 'OTH' SHOULD EXIST ON SY:
.ASK ASSUMP ARE ALL THESE ASSUMPTIONS TRUE
.IFF ASSUMP ;WE WILL EXIT NOW SO YOU CAN MAKE THE ASSUMPTIONS TRUE
.IFF ASSUMP /
SET /UIC=[12,10]
.IFNINS SLP INS $SLP
SLP @[2,4]MGCML.COR
SLP @[2,4]INDERR.COR
SLP @[2,4]INDIMP.COR
SLP @[2,4]INDAS2.COR
SLP @[2,4]INDAS3.COR
SLP @[2,4]INDAS1.COR
SLP @[2,4]PAUSE1.COR
SLP @[2,4]INDPDW.COR
SLP @[2,4]INDFIL.COR
SLP @[2,4]INDASK.COR
SLP @[2,4]INDINX.COR
.IFNINS ...MAC ;PLEASE INSTALL AN ASSEMBLER
.IFNINS ...MAC .PAUSE
.IFNINS ...MAC /
MAC MGCML=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]MGCML
MAC INDERR=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]INDERR
MAC INDIMP=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]INDIMP
MAC INDINX=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]INDINX
MAC INDAS2=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]INDAS2
MAC INDAS3=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]INDAS3
MAC INDAS1=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]INDAS1
MAC INDPDW=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]INDPDW
MAC PAUSE1=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]PAUSE1
MAC INDFIL=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]INDFIL
MAC INDASK=LB:[1,1]EXEMC/ML,[200,200]RSXMC/PA:1,SY:[12,10]INDASK
SET /UIC='LOC'
.IFNINS ...LBR INS $LBR
LBR IND.OLB/RP=[12,10]INDERR.OBJ,INDIMP,INDAS2,INDAS3,INDAS1
LBR IND.OLB/RP=[12,10]INDPDW.OBJ,PAUSE1,INDFIL,INDASK,INDINX
LBR IND.OLB/RP=[12,10]MGCML.OBJ
.IFT MAP .IFT LARGE SLP @[2,4]SMALLCMD.COR
.IFT MAP .IFF LARGE SLP @[2,4]MAPCMD.COR
.IFT MAP .IFT LARGE SLP @[2,4]SMALL.COR
.IFT MAP .IFF LARGE SLP @[2,4]MAPODL.COR
.IFF MAP SLP @[2,4]UNMAPCMD.COR
.IFF MAP SLP @[2,4]UNMAPODL.COR
.IFT MAP .GOTO OK
;ANSWER "TEC" "EDI" OR "EDT" OR SOME OTHER EDITOR ON THE SYSTEM
.ASKS EDTOR WHAT IS YOUR FAVORITE EDITOR
.IFNINS ...'EDTOR' INS $'EDTOR'
;PLEASE EDIT THE BUILD FILE SO THAT AT. IS BUILT
;FOR THE CORRECT PARTITION
;BECAUSE OF SPACE RESTRICTIONS PARTITION MUST BE LARGER THAN
;40000
PAR
'EDTOR' INDBLD.CMD
.OK:.IFNINS ...TKB ;PLEASE INSTALL A TASKBUILDER (TKB OR BIGTKB)
.IFNINS ...TKB .PAUSE
;THERE WILL BE SEVERAL MULTIPLY AND AMBIGUOUSLY DEFINED SYMBOLS
;BUT THESE DO NOT SEEM TO CAUSE ANY PROBLEMS WHEN THE NEW
;INDIRECT PROCESSOR IS IN USE.
TKB @INDBLD
;YOUR NEW INDIRECT PROCESSOR IS SY:'OTH'FILEIND.TSK.
;YOU MAY WISH TO PIP IT TO LB:  IF THIS IS A DIFFERENT
;DEVICE THAN SY:
;I RECOMMEND THAT YOU SAVE THE OLD INDIRECT PROCESSOR
;LB:'OTH'IND.TSK AS I DO NOT PROMISE THAT THE NEW ONE IS
;WITH OUT BUGS.  ALTHOUGH I HAVE TESTED IT, I HAVE NOT
;HAD THE OPPORTUNITY TO TEST IT THOROUGHLY.
;YOU MAY WISH TO REMOVE THE OLD INDIRECT PROCESSOR
;       REM AT.
;AND INSTALL THE NEW ONE
;	INS $FILEIND
;THE ABOVE COMMAND ASSUMES THAT FILEIND IS ON 'OTH'
;ON LB:
;YOU MAY DECIDE TO MAKE THESE CHANGES PERMANENT BY
;SAVING THE SYSTEM ONCE THESE CHANGES HAVE BEEN MADE.