Subject: DL-11 defined in /dev/MAKEDEV plus change to dh.4 man page (#74)
Index:	/dev/MAKEDEV,/usr/src/man/man4/dh.4 2.11BSD

Description:
	The 11/93 and 11/94 have 7 extra DL-11 type serial ports on the
	cpu board.  A device node name was needed.  'dl' was selected
	and the /dev name is /dev/ttyl[1-7].  Unit 0 is reserved for the
	console device.

Repeat-By:
	Put 2.11BSD on a 11/93, note that /dev/MAKEDEV doesn't know what
	to do.

Fix:
	It is highly unlikely that more than 4 DH-11 units will (or can)
	be used.  The dh.4 man page and /dev/MAKEDEV script were updated 
	to only allow tty[h,i,j,k] and ttyl was selected as the DL-11
	device name.
==============================cut here============================
*** /dev/MAKEDEV.old	Sun Dec 22 17:16:18 1991
--- /dev/MAKEDEV	Thu Jul 23 20:29:09 1992
***************
*** 24,29 ****
--- 24,30 ----
  #	si*	unibus cdc 9766 w/ si 9500
  #	xp*	unibus rm02/03/05, rp04/05/06, diva, eagle, cdc9766, fuji 160.
  # Terminal multiplexors:
+ #	dl*	dl-11 units other than the console
  #	dz*	unibus dz11 and dz32
  #	dh*	unibus dh11 and emulations (e.g. Able dmax, Emulex cs-11)
  #	dmf*	unibus dmf32
***************
*** 250,256 ****
  		unit=`expr $i : "$name\(.*\)"`
  		case $unit in
  		0) ch=h ;; 1) ch=i ;; 2) ch=j ;; 3) ch=k ;;
- 		4) ch=l ;; 5) ch=m ;; 6) ch=n ;; 7) ch=o ;;
  		*) echo bad unit for $name in: $i ;;
  		esac;;
  	esac
--- 251,256 ----
***************
*** 263,274 ****
  		printf("/etc/mknod tty%s%c c %d %d; ",ch,87+i,m,u+i); }'`
  	;;
  
  # we may want va and vp someday...
  # lp*|va*|vp*)
  lp*|dn*)
  	case $i in
  	lp*) name=lp; major=5;;
! 	dn*) name=dn; major=21;
  #	va*) name=va; major=10;;
  #	vp*) name=vp; major=6;;
  	esac
--- 263,293 ----
  		printf("/etc/mknod tty%s%c c %d %d; ",ch,87+i,m,u+i); }'`
  	;;
  
+ # extra DL-11 units not including the console.  unit numbers start at 1 because
+ # the console is always unit 0.  Seven units (1 - 7) are defined for the 11/93
+ # and 11/94.  Device name is "ttyl?".  The DH range was restricted from 'h'-'o'
+ # to 'h' - 'k' (very unlikely that more than 64 channels of DH-11 will or could
+ # be put on an 11.
+ 
+ dl*)
+ 	name=dl; major=0; ch=l
+ 	unit=`expr $i : "$name\(.*\)"`
+ 	case $unit in
+ 	1|2|3|4|5|6|7)
+ 		/etc/mknod tty${ch}${unit} c $major $unit;
+ 		;;
+ 	*)
+ 		echo bad unit for $name in: $i
+ 		;;
+ 	esac
+ 	;;
+ 
  # we may want va and vp someday...
  # lp*|va*|vp*)
  lp*|dn*)
  	case $i in
  	lp*) name=lp; major=5;;
! 	dn*) name=dn; major=21;;
  #	va*) name=va; major=10;;
  #	vp*) name=vp; major=6;;
  	esac
*** /usr/src/man/man4/dh.4.old	Thu Jan 28 11:56:23 1988
--- /usr/src/man/man4/dh.4	Thu Jul 23 20:29:11 1992
***************
*** 2,8 ****
  .\" All rights reserved.  The Berkeley software License Agreement
  .\" specifies the terms and conditions for redistribution.
  .\"
! .\"	@(#)dh.4	6.2 (Berkeley) 1/28/88
  .\"
  .TH DH 4 "January 28, 1988"
  .UC 2
--- 2,8 ----
  .\" All rights reserved.  The Berkeley software License Agreement
  .\" specifies the terms and conditions for redistribution.
  .\"
! .\"	@(#)dh.4	6.3 (Berkeley) 7/23/92
  .\"
  .TH DH 4 "January 28, 1988"
  .UC 2
***************
*** 26,32 ****
  	raw: 3
  minor device encoding:
  	bits 0017 specify line on DH unit
! 	bits 0160 specify DH unit
  	bit  0200 specifies non-blocking open (``CD always on'')
  .fi
  .ft R
--- 26,33 ----
  	raw: 3
  minor device encoding:
  	bits 0017 specify line on DH unit
! 	bits 0060 specify DH unit
! 	bit  0100 unused
  	bit  0200 specifies non-blocking open (``CD always on'')
  .fi
  .ft R
***************
*** 63,69 ****
  the driver polls for input 30 times per second.
  .SH FILES
  .ta \w'/dev/MAKEDEV.local  'u
! /dev/tty[h-o][0-9a-f]
  .br
  /dev/ttyd[0-9a-f]
  .br
--- 64,70 ----
  the driver polls for input 30 times per second.
  .SH FILES
  .ta \w'/dev/MAKEDEV.local  'u
! /dev/tty[h-k][0-9a-f]
  .br
  /dev/ttyd[0-9a-f]
  .br