This is an RSX-11M-PLUS V4.6 distribution kit image for AZ11 controller.

AZ firmware v1.07 or newer is required for RSX-11M-PLUS.
AZ firmware v2.00 or newer is required for 32 device units to be supported.

See https://forum.maxiol.com/index.php?showforum=121 for more info on AZ11.

The following changes are made to the RSX-11M-PLUS V4.6 distribution kit:
 - Added DA device I/O driver for AZ11 disk controller
 - Added DA device crash driver for AZ11 disk controller
 - Added DH device I/O driver for HD11 (DVK emulator) disk controller
 - Added DH device crash driver for HD11 (DVK emulator) disk controller
 - Updates for BP2, C81, DTR, F77, FOR, PAS are added to the kit
 - HELP: fixed some errors and typos
 - SYSGEN: fixed generation of systems without D-space support
 - SYSGEN: added support for DA device
 - SYSGEN: added support for DH device
 - ACF: added support for AZ11 disk controller
 - ACF: added support for HD11 (DVK emulator) disk controller
 - ACF: added support for 1801VM3 CPU (detected as 11/23-PLUS)
 - ACO: added support for AZ11 disk controller
 - ACO: added support for HD11 (DVK emulator) controller
 - ACO: fixed device table size (to be in sync with ACF)
 - BOO: added support for booting the system from DA:
 - BOO: added support for booting the system from DH:
 - BOO: CPU is initialized before starting of the system being booted with /HW switch
 - BRU: added permission checking for restore to mounted disk operation
 - FLX: DA device is marked as a valid RT-11 device
 - FLX: DH device is marked as a valid RT-11 device
 - HRC: added support for DA device driver (device type is set to AZ11)
 - HRC: added support for DH device driver (device type is set to HD11)
 - IOX: DA device is preconfigured as a disk
 - IOX: DH device is preconfigured as a disk
 - MCR: better date formatting for DEV /LOG command
 - MCR: CLI /LGO renamed to CLI /LOG (to be in sync with HELP and docs)
 - MCR: SET /NOPAR command is privigeled
 - RMD: fixed displaying of free blocks for large disks on VT52
 - SAV: added support for saving/booting the system to/from DA:
 - SAV: added support for saving/booting the system to/from DH:
 - SAV: for 1801VM3 CPU bus type is set to Q-Bus, and CPU type is set to 23
 - VMR: added permission checking for opening of the system image

Changed files
~~~~~~~~~~~~~
[1,2]EXECUTIVE.HLP
[1,2]MCRTAS.HLP
[1,2]SYSLIB.HLP
[1,2]VCP.HLP

[1,20]BOOBLD.BLD
[1,20]CRABLD.BLD
[1,20]IOXBLD.BLD
[1,20]SAVBLD.BLD

[1,24]ACF.OLB		ACFOUT,ACFROT
[1,24]BOO.OLB		BOTPH2
[1,24]BRU.OLB		BRUHEA,DBLBUF,ROOT
[1,24]EUT.OLB		DACRSH,DHCRSH
[1,24]FLX.OLB		DEVTAB,GETDEV
[1,24]IOX.OLB		IOXINT
[1,24]MCR.OLB		CLIOV,DEVOV,ST2OV
[1,24]OLR.OLB		HRSIZ
[1,24]RMD.OLB		V52MDM
[1,24]SAV.OLB		HRSIZ,SAVDA,SAVDH,SAVSIZ
[1,24]VMR.OLB		SETUP,VMCTL

[2,54]ACF.TSK
[2,54]BASLINVMR.CMD
[2,54]DADRV.STB
[2,54]DADRV.TSK
[2,54]DHDRV.STB
[2,54]DHDRV.TSK
[2,54]RSX11M.SYS
[2,54]RSXMC.MAC
[2,54]SAV.TSK

[3,54]ACO.TSK
[3,54]BOO.TSK
[3,54]BRU.TSK
[3,54]DACRSH.STB
[3,54]DACRSH.TSK
[3,54]DHCRSH.STB
[3,54]DHCRSH.TSK
[3,54]FLX.TSK
[3,54]FLXFSL.TSK
[3,54]FLXRES.TSK
[3,54]IOX.TSK
[3,54]IOXFSL.TSK
[3,54]IOXRES.TSK
[3,54]HRC.TSK
[3,54]MCR.TSK
[3,54]RMD.TSK
[3,54]VMR.TSK

[11,10]CRASH.MAC
[11,10]DADRV.MAC
[11,10]DHDRV.MAC
[11,10]LOWCR.MAC
[11,10]SYSXT.MAC

[12,10]BOTPH2.MAC
[12,10]CLIOV.MAC
[12,10]DEVOV.MAC
[12,10]SAVDA.MAC
[12,10]SAVSIZ.MAC
[12,10]ST2OV.MAC

[12,24]XMCASM.CMD
[12,24]XMCLIBBLD.CMD

[14,10]V52MDM.MAC

[27,10]HRSIZ.MAC

[200,200]SYSGEN.CLB	SGNBE,SGNEXC,SGNMAS,SGNVC