The following UIC's are part of the KMSF RSX11M V3.2 Enhancements
Package.

[344,1] FCS resident library for RSX11M V3.2 which is auto-
ZAPPED to build with all DEC utilities even those calling
for additional SYSLIB modules. For the more daring
a version of FCSRES is supplied which will support
ANSI magtape and big buffering.

[344,2] A complete package of HELP files in the new V3.2
HELP file format.

[344,5] Useful command files. SHOW-show system status
either using ...AT. or ...PIN. BATCH, OPT,BLD,
and F4P are all command files used in creating
build files for F4P programs. The command files
are used by the batch processor. SPR.CMD-The
RSX group likes this one. It will produce
legible, machine generated SPR addendums. SPR
administration will now accept these if you send
in a preprinted form with your name attached and
6 or so copies of the addendum.

[344,20] A collection of ODL files suitable for building most
of the RSX utilities with an FCS resident library.

[344,24] A collection of command files and ODL files suitable
for building many of the EXECUTIVE privleged tasks
with an FCS resident LIBRARY. A FCS resident
library suitable for V3.2. A collection of command
files suitable for building almost all the utilities
with an FCS resident library.

[344,40] Terminal and disk accounting, privlege allocation,
modifications to HELLO and BYE, account utilities
and report programs. A task to monitor total system
utilizaton(CPULOG) in the USER, EXEC, and NULL task
states. An update to Greg Basset's ACCLOG (called
TSKLOG) suitable for V3.2 BL26). Mark Johnson's
new, improved MAIL Utility. Run privlege checking
and parameter passing for INSTALL. (This version of
TSKLOG assumes SYSTEM ACCOUNTING not in use).
Implementation of the RSX11M-PLUS system uic for
privileged tasks, LIBUIC. Support to set the value
of LIBUIC via the SET command, and RUN $ searches
both SYSUIC and LIBUIC on LB0: for the task.
Enhancements to ...AT. to provide a default UIC to
check for command files[1,5] if a file is not found,
to implement <LIBUIC>, and to implement the /NOLI
switch.

[344,41] Simple accounting programs based on Gregg Bassets
ACCLOG. These programs should run under V3.2. CPULOG
computes the time the system spends in USER, SYSTEM
and IDLE state and logs the data to file at periodic
intervals. TSKLOG is just like GREGG BASSET's ACCLOG
except it runs under V3.2.

[344,43] Utilities. An enhanced version of Coleman's
CVL allowing the user to change most of the
disk volume INI parameters. A Truncate utility,
a disk fragmentation utility, and a spool
queue display utility. As a bonus for all user's
who have ever had a POOL run out, courtesy
of the RSX11M group is POOL, the pool monitor
which won't let you run out of pool if it can
help it. Also included is Fortran task which
will force MCR command lines onto other terminals
using the SPAWN directive, and a macro task(TCF)
to decode a command line of ASCII octal numbers
and send them to TI: as terminal control commands.
(ie TCF 7 is ^G or BELL).

[344,44] Here is a version of the old RMDEMO which runs on VT100's
which are in ANSI mode. This version is almost half as
small as the new version and supports many of its
features(X - exits, R - replots). This version(less
my mods) was distributed with the field test kit of
RSX11M V3.2 and is distributed here courtesy of the the
RSX group.

[344,45] RSX11M V3.2 BATCH including Virtual Terminal support,
BATCH, and SUBMIT utilities, Batch Queue display,
documentation, and a Fortran callable subroutine
to interface with VTDRV. Also included is a
Procedure Interpreter(PIN) for use with BATCH.
PIN is used as a replacement for ...AT. by BATCH
When built with FCSRES, PIN is 4 times smaller than
...AT.

[344,65] A complete SYSTEM ACCOUNTING package for
RSX11M. While oriented towards providing
performance measurement tools, it provides the
basis for implementing a very reasonable charge
back accounting system. Please read SYSLOG.DOC.


A discription of all the modifications and enhancements and most of
the utilities is in KMSKIT.DOC. The command file [344,40]KMSGEN.CMD will
provide all required information for building the KMS Enhancements
and a number of the other programs. Read KMSKIT.DOC before trying to
include the executive data base changes.


The files ACCOUNT.HLP and BATCH.HLP are HELP format files for even-
tual use with the HELP processing enhancements. MCRAT.TXT and
EXAMPLES.TXT are KMS's documentation on the MCR and ...AT. changes and Richard
Kirkman's origional documentation for CCL. Please note that substantial
enhancements have been made to CCL. CCL.DOC(CCL.RNO) is the user's manual
for CCL.

To use this kit, transfer the files to their respective UIC's. The
user with an RK05 system (like me) is going to have a bit of trouble since
there are a lot of files. If the HELP and documentation files are all
transfered to a seperate disk, then a RK05 can be constructed containing
just the kit sources, command files, SLP files, and DEC virgin distribution
source files and .OLB files.(with room left over for taskbuilding). However
it will be tight. Read all the documentation over twice. Set /UIC=[344,40]
and type @KMSGEN/-MC and run through a KMSGEN asking for a long dialog.
Place the required DEC sources in the correct places, renaming them if
required. KMSGEN will try and do all the SLP patches both to the EXEC
modules and the SYSGEN command files. If KMSGEN sucessfully SLPs the EXEC
and SYSGEN command files, stop and do a SYSGEN if you are incorporating
data structures(accounting) requiring a SYSGEN. Once the SYSGEN is done
use KMSGEN again to create all needed files.


It is very important that any user implementing these enhancements
to register its use with me. If any bugs are found that are of consequence
I am prone to mail out bug fixes to the current distribution list. Also
direct feedback to me is important for deciding if features/programs are
to be enhanced, maintained and supported from one RSX11M release to the
next.

These programs have been extensively tested for the case where all KMS
options are selected and where most DEC sysgen options are selected.
Other options/configurations of this KIT are possible, but until I start
getting feeback from other users who have configured their option selection
option selection differently, I will not know if I got all the conditional
code correct.


Good Luck,


James G. Downward
KMS Fusion, Inc.
3941 Research Park Dr.
Ann Arbor, Mich. 48104
(313)-769-8500