All command files follow the standard RSX-11M conventions.
1. [100,10] should contain all source modules.
2. [100,20] should contain the file RNOASM.CMD.
3. [100,20] will recieve the object output files.
4. [100,30] will receive listing files.
5. [1,20] should contain the file RNOBLD.ODL
6. [1,24] should contain the file RNOBLD.CMD
7. [1,34] will receive the map output file.
8. [1,54] will receive the task image file.
Procedure:
1. Use UFD to set up the proper UFDs, if necessary. Note
that all command files must be changed if you do not do
this.
2. Use FLX to move the files to their proper UICs.
3. Set the UIC to [100,20] and assemble.
SET /UIC=[100,20]
MAC @RNOASM
4. Use PIP to construct a concatenated object file for all
RNO files:
PIP>RNO.OBS=*.OBJ
5. SET THE UIC to [1,20] and build a library containing
the RNO object files:
SET /UIC=[1,20]
LBR>RNO/CR=[100,20]RNO.OBS
6. Edit the Task Build command file to reflect your
individual system needs. The Task Build command file
contains parameters to set the default switches,
default paper size (for /-FF) and default underline
mode.
7. Build the task image file. The map will go to [1,34]
and the task image to [1,54].
TKB @[1,24]RNOBLM
PAGE 2
RSX-11M UNMAPPED SYSTEMS
Users of unmapped systems should follow the procedure outlined
for mapped systems, but selecting UICs as appropriate. File
RNOBLD.CMD will have to be edited to delete the /MM switch and
to change the PAR directive to match system requirements.
RSX-11D/IAS
Users of RSX-11D/IAS should follow the procedure outlined for
users of RSX-11M Mapped systems. Since the conventions for
source and object files are installation dependent, all .CMD and
.ODL files should be edited accordingly. Additionally,
RSX-11D/IAS users should alter RNOBLD.CMD to change the /MM
switch to /MU and to change the PAR directive as needed.
Alternatively, IAS users may use command file RNOIAS.CMD to
assemble and build RUNOFF. The command file contains parameters
to set the default switches, default paper size (for /-FF) and
default underline mode.
RSTS/E
To build RUNOFF under RSTS/E V06C-03 systems, run the $BUILD
program and specify the RNOBLD.CTL control file on the
distribution medium. RNOBLD.CTL assumes that all files have
been copied to account [100,100] (use PIP.SAV). If users desire
to build directly from the distribution of from another account,
it will be necessary to edit RNOBLD.CTL to change references to
[100,100] to the [p,pn] used in the distribution. Both the RT11
and RSX Run-Time Systems are assumed present in the system, as
the PIP.SAV, MAC.TSK, LBR.TSK, and TKB.TSK programs are required
in the build procedure. The Task Builder run will normally
produce the message:
?TKB -- *DIAG*-MODULE ERR MULTIPLY DEFINES SYMBOL EOF
This is not an error. At the (successful) completion of the
procedure, RNO will be ready to run.
The last step of RNOBLD.CTL copies the files necessary to use
RNO (i.e., RNO.TSK and RUNOFF.RNO) to account [1,2]. This step
should be deleted or changed if users do not desire to store RNO
in [1,2].
To use the Concise-command language feature of RSTS/E, the
following CCL command should be installed:
CCL RNO=[P,PN]RNO.TSK
RNO.TSK is not a privileged program. It should, however, be
installed with an <104> protection code if it is desirable for
all users on the system to access it.
PAGE 3
CONTENTS OF THE DISTRIBUTION
RNOASM.CMD - Assembly command file for RSX-11M
RNOBLD.CMD - Task builder command file for RSX-11M
RNOBLD.CTL - RSTS/E build control file
RNOBLD.ODL - Overlay description for RSX-11M
RNO.ODL - Overlay descriptor for RSTS/E
RNOIAS.CMD - Command file for IAS
RNOIAS.ODL - Overlay descriptor for IAS
RSTASM.CMD - Assembly command file for RSTS/E
RSTBLD.CMD - Task builder command file for RSTS/E
CMTAB.MAC - RUNOFF source file
COMND.MAC - RUNOFF source file
ERMSG.MAC - RUNOFF source file
FMTCM.MAC - RUNOFF source file
HYPHEN.MAC - RUNOFF source file
INDEX.MAC - RUNOFF source file
PINDX.MAC - RUNOFF source file
RNCMD.MAC - RUNOFF source file
RNFIO.MAC - RUNOFF source file
RNORSX.MAC - RUNOFF source file
RUNOFF.MAC - RUNOFF source file
START.MAC - RUNOFF source file
RNPRE.MAC - RUNOFF source prefix file for all systems
RSTS.MAC - RUNOFF second prefix file for RSTS/E
RUNOFF.RNO - Source for RUNOFF manual
README.1ST - This document